Replies: 3 comments 1 reply
-
@zigit780 currently it is not intede to communicate with one inverter using two different DTUs simultaneously. This will lead to conflict and the very common error #2 DTU command failed. There are intentions to build a DTU -> S-Miles Cloud bridge as the relevant .protobuf Network Command / S-Miles Installer App protocols are used to talk to newer WiFi series models. Maybe these efforts will lead to theb option of porting some of the .protobuf Protocol using the protobuf-nano Library to the OpenDTU ESP32 C-Code in the far future. But that is still debatable and has to be implemented / accepted by the project maintainer. |
Beta Was this translation helpful? Give feedback.
-
Hallo, bei mir ging es auch nicht. Gruß |
Beta Was this translation helpful? Give feedback.
-
Moin The HM series works quite easily with two DTUs. It doesn't work with the HMS/T, I tried that a few times. |
Beta Was this translation helpful? Give feedback.
-
Hello, I have a HMS-800-2T with an DTU W Iite S Stick from Hoymile and a OpenDTU with Oled-Display.
The openDTU use the CMT3200 rf-module.
Currently I wasn't sucessful to have parallel operation with both (OpenDTU and DTU Wlite S).
I changed the intervall of openDTU to 120s but the DTU-W lite S can't connect if openDTU is active.
and vice versa if DTU W lite S is active it seems I can't connect the openDTU.
So if I search with G***** I found statements that it should be possible in parallel or is that a misunderstanding.
So must I increase intervall or must I set / not set something else in config for this.
Because I want to have the Live-Display and also the data evaluation in the cloud.
Beta Was this translation helpful? Give feedback.
All reactions