Cordcutter is a nextcord extension that implements the circuit breaker design pattern for application commands.
Cordcutter works by watching for errors in your application commands and once the error threshold is reached (breaker tripped), it will disable the command for a set period of time. Once the cool-down period is over, the command will be re-enabled (breaker reset).
Cordcutter currently does not implement an semi-stable circuit breaker (half-open / half-tripped state), but this is a planned feature.
For more information on the circuit breaker design pattern, see this wikipedia article.
Cordcutter is currently in development and is not yet available on PyPI. You can install it from Git using pip:
pip install git+https://github.com/teaishealthy/cordcutter.gitSimply import the Cordcutter class from cordcutter and pass your nextcord.Client instance to it.
from cordcutter import Cordcutter
# <snip>
cordcutter = Cordcutter(client)You can configure when the breaker trips and how long it stays tripped by passing the threshold and reset_after parameters to the Cordcutter constructor:
Cordcutter(
client,
threshold = 3,
reset_after = timedelta(minutes=5)
)