forked from torvalds/linux
-
Notifications
You must be signed in to change notification settings - Fork 4
/
nvidia,tegra20-nand.yaml
106 lines (84 loc) · 2.17 KB
/
nvidia,tegra20-nand.yaml
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/mtd/nvidia,tegra20-nand.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: NVIDIA Tegra NAND Flash controller
maintainers:
- Thierry Reding <thierry.reding@gmail.com>
- Jon Hunter <jonathanh@nvidia.com>
properties:
compatible:
const: nvidia,tegra20-nand
reg:
maxItems: 1
interrupts:
maxItems: 1
clocks:
items:
- description: module clock
clock-names:
items:
- const: nand
resets:
items:
- description: module reset
reset-names:
items:
- const: nand
operating-points-v2:
$ref: "/schemas/types.yaml#/definitions/phandle"
power-domains:
items:
- description: phandle to the core power domain
required:
- compatible
- reg
- interrupts
- clocks
- clock-names
- resets
- reset-names
allOf:
- $ref: nand-controller.yaml
patternProperties:
"^nand@[a-f0-9]$":
type: object
properties:
nand-ecc-mode:
description: String, operation mode of the NAND ecc mode.
const: hw
nand-ecc-algo:
enum: [ bch, rs ]
nand-ecc-strength:
enum: [ 4, 6, 8, 14, 16 ]
wp-gpios:
$ref: /schemas/types.yaml#/definitions/phandle-array
description: GPIO specifier for the write protect pin.
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/clock/tegra20-car.h>
#include <dt-bindings/gpio/tegra-gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
nand-controller@70008000 {
compatible = "nvidia,tegra20-nand";
reg = <0x70008000 0x100>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA20_CLK_NDFLASH>;
clock-names = "nand";
resets = <&tegra_car 13>;
reset-names = "nand";
#address-cells = <1>;
#size-cells = <0>;
nand@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <1>;
nand-bus-width = <8>;
nand-on-flash-bbt;
nand-ecc-algo = "bch";
nand-ecc-strength = <8>;
wp-gpios = <&gpio TEGRA_GPIO(S, 0) GPIO_ACTIVE_LOW>;
};
};