A simple 2-key keypad. This was previously the "no bells and whistles" model, but now features a bottom-mounted RGB LED that adds some RGB underglow to the keypad! The side button functions as escape and is also used to change LED modes and the color of the keys on the "custom" LED mode.
Side button functionality
Hold time
Functionality
Less than 0.5s
Escape
0.5 - 1.5s
Change LED mode
more than 1.5s
Change brightness (Press Z to lower and X to raise)
more than 1.5s (on custom LED mode)
Change color per-key
LED modes
Order
Mode
1
Cycle - Fades through rainbow.
2
Reactive - Turns LEDs on when pressed and fades from red to green to blue to off when released.
3
Push Off - LEDs are normally white and fade from red to green to blue to off when the keys are pressed.
4
Custom - LED color can be set per-key.
5
BPM - LEDs turn white when pressed and change color depending on how much you hit them per second when released.
6
Color Change - Colors cycle in steps per-press per-key.
Touch Keypad
A 2-key keypad that uses two capacitive metal pads instead of switches, which results in faster key presses (by removing key travel) and a slimmer keypad. It features LED modes specifically rewritten for this model and a side button that is... a screw? The side screw is just like the two top keys and will press the mapped key when touched (escape by default.)
Unlike the non-touch models, all configuration of the keypad can be done using a program like Termite and all settings will be saved to the keypad. This frees up the side button to function as a regular key and it can be remapped just like the top buttons.
LED modes
Mode
Description
Cycle
Fades through rainbow; White when key is pressed; Off when side button is pressed
Reactive
Turns to white when pressed and fades through r>g>b>off when released
Reactive Inverted
Fades through r>g>b>off when pressed and turns to white when released
Color Change
Colors cycle in steps per-press per-key.
BPS
Color changes depending number of keypresses per second and turns white while key is pressed
Custom
LED uses user-specified color (can be set through Termite)
Off
LED is turned off
MegaTouch Keypad
A larger version of the 2K touch keypad. It features 60% larger touch pads (1 1/4" squares) with the same gap as the normal model, so it's great whether you just want a larger touch area or you play with your index+ring fingers! It's still just as slim at only 12 mm tall and is just as big as it needs to be to accommodate the touch pads. The side screw still functions as a capacitive button and is mapped to Escape by default, but can be easily remapped to something like ~ for quick restart. Configuration of LED modes and brightness can be done through the software remapper.
LED modes
Mode
Description
Cycle
Fades through rainbow; White when key is pressed; Off when side button is pressed
Reactive
Turns to white when pressed and fades through r>g>b>off when released
Reactive Inverted
Fades through r>g>b>off when pressed and turns to white when released
Color Change
Colors cycle in steps per-press per-key.
BPS
Color changes depending number of keypresses per second and turns white while key is pressed
Custom
LED uses user-specified color (can be set through Termite)
Off
LED is turned off
RGB Keypad
A fancier version of the basic model that features not only the bottom-mounted LED, but also an RGB LED under each key. This makes for much brighter and more prominent lighting effects. The side button functions as escape and is also used to change LED modes, brightness, and the colors of the keys on the "custom" LED mode.
Side button functionality
Hold time
Functionality
Less than 0.5s
Escape
0.5 - 1.5s
Change LED mode
more than 1.5s
Change brightness (Press Z to lower and X to raise)
more than 1.5s (on custom LED mode)
Change color per-key
LED modes
Order
Mode
1
Cycle - Fades through rainbow.
2
Reactive - Turns LEDs on when pressed and fades from red to green to blue to off when released.
3
Push Off - LEDs are normally white and fade from red to green to blue to off when the keys are pressed.
4
Custom - LED color can be set per-key.
5
BPM - LEDs turn white when pressed and change color depending on how much you hit them per second when released.
6
Color Change - Colors cycle in steps per-press per-key.
Basic 4K Keypad
A 4-key version of the RGB keypad made for use with Taiko and Mania. Like the 2K basic model, this was previously the "no bells and whistles" model, but now features a bottom-mounted RGB LED that adds some RGB underglow to the keypad! The side button functions as escape and is also used to change LED modes and the color of the keys on the "custom" LED mode.
Side button functionality
Hold time
Functionality
Less than 0.5s
Escape
0.5 - 1.5s
Change LED mode
more than 1.5s
Change brightness (Press Z to lower and X to raise)
more than 1.5s (on custom LED mode)
Change color per-key
LED modes
Order
Mode
1
Cycle - Fades through rainbow.
2
Reactive - Turns LEDs on when pressed and fades from red to green to blue to off when released.
3
Push Off - LEDs are normally white and fade from red to green to blue to off when the keys are pressed.
4
Custom - LED color can be set per-key.
5
BPM - LEDs turn white when pressed and change color depending on how much you hit them per second when released.
6
Color Change - Colors cycle in steps per-press per-key.
4K Touch Keypad
Looking for something slimmer, quieter, more portable, or all three? This 4-key keypad primarily for Mania and Taiko uses two capacitive pads instead of switches, which results in faster key presses (by eliminating key travel) and a slimmer design. It features LED modes specifically rewritten for this model and a side button that is... a screw? The side screw is just like the two top keys and will press the mapped key when touched (escape by default.)
Unlike the non-touch models, all configuration of the keypad can be done using a program like Termite and all settings will be saved to the keypad. This frees up the side button to function as a regular key and it can be remapped just like the top buttons.
LED modes
Mode
Description
Cycle
Fades through rainbow; White when key is pressed; Off when side button is pressed
Reactive
Turns to white when pressed and fades through r>g>b>off when released
Reactive Inverted
Fades through r>g>b>off when pressed and turns to white when released
Color Change
Colors cycle in steps per-press per-key.
BPS
Color changes depending number of keypresses per second and turns white while key is pressed
Custom
LED uses user-specified color (can be set through Termite)
Off
LED is turned off
4K RGB Keypad
A fancier version of the basic 4K keypad made for use with Taiko and Mania. This model that features not only the bottom-mounted LED, but also an RGB LED under each key. This makes for much brighter and more prominent lighting effects. The side button functions as escape and is also used to change LED modes, brightness, and the colors of the keys on the "custom" LED mode.
Side button functionality
Hold time
Functionality
Less than 0.5s
Escape
0.5 - 1.5s
Change LED mode
more than 1.5s
Change brightness (Press Z to lower and X to raise)
more than 1.5s (on custom LED mode)
Change color per-key
LED modes
Order
Mode
1
Cycle - Fades through rainbow.
2
Reactive - Turns LEDs on when pressed and fades from red to green to blue to off when released.
3
Push Off - LEDs are normally white and fade from red to green to blue to off when the keys are pressed.
4
Custom - LED color can be set per-key.
5
BPM - LEDs turn white when pressed and change color per-key depending on how much you hit them per second when released.
6
Color Change - Colors cycle in steps per-press per-key.
7K RGB Keypad
A keypad made for 5K and 7K osu!Mania. This keypad features seven LEDs for interesting LED modes and full NKRO. The bottom key uses a 2x width angled keycap for better ergonomics. There is also a multi-function key (this is the same as the side button on my other models) that can be used to either configure your keypad or as a simple escape key.
Multi-function button
Hold time
Functionality
Less than 0.5s
Escape
0.5 - 1.5s
Change LED mode
more than 1.5s
Change brightness (Press key 1 to lower and key 2 to raise while holding the button)
more than 1.5s (on custom LED mode)
Change color per-key
LED modes
Order
Mode
1
Cycle - Fades through rainbow.
2
Reactive - Turns LEDs on when pressed and fades from red to green to blue to off when released.
3
Push Off - LEDs are normally white and fade from red to green to blue to off when the keys are pressed.
4
Custom - LED color can be set per-key.
5
BPM - LEDs turn white when pressed and change color per-key depending on how much you hit them per second when released.
6
Color Change - Colors cycle in steps per-press per-key.
Macropad
By popular request, I made a keypad focused less on crazy lights and more on people that want the ability to quickly switch between button mappings. This model features not only the ability to map each key to up to 3 keys, but also six "pages" of mappings that you can change by holding the side button and pressing one of the six keys. It also has a single RGB LED to show the current page.
Side button functionality
Hold time
Functionality
Less than 0.5s
Escape
More than 0.5s
Change mapping page (1-6 depending on face button pressed)
Default button mapping
Page
Keys
1
A, S, D, Z, X, C
2
Q, W, E, A, S, D
3
blank, up, blank, left, down, right
4
1, 2, 3, 4, 5, 6
5
all blank
6
all blank
Coming Soon
2x2 Keypad
Think you need more than two keys for osu? Want to easily be able to restart a song, change volume, and navigate the song menu? Four keys are better for that than two, and the side button functions as a modifier key, effectively giving you 8 mappable keys!
You can’t perform that action at this time.
You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.