Skip to content

thomasloven/lovelace-layout-card

Folders and files

NameName
Last commit message
Last commit date

Latest commit

ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 

Repository files navigation

layout-card

hacs_badge

Get more control over the placement of lovelace cards

For installation instructions see this guide.

Quick Start

  • Go to one of your lovelace views and select "Edit Dashboard"
  • Click the pencil symbol next to the view name to open up the view properties
  • Select "Masonry (layout-card)" from the "View type" dropdown list
  • Click "Save"

Hopefully, you should see no difference at all now.

  • Enter the following in the "Layout Options" box:
    width: 300
    max_cols: 10
  • Click Save

You should now have more, narrower, columns of cards in your view.

Please note that the "LAYOUT" tab in the animation below is now incorporated in the "SETTINGS" tab instead.

Quick Start

Usage

View Layouts

Layout-card adds four new view layout to lovelace.

  • Masonry (custom:masonry-layout)
  • Horizontal (custom:horizontal-layout)
  • Vertical (custom:vertical-layout)
  • Grid (custom:grid-layout)

The difference between the types of layout is described below.

Those can be selected either via the GUI as in the Quick Start above, or in the lovelace configuration by setting type (and optionally layout):

views:
  - title: Home
    type: custom:masonry-layout
    layout:
      width: 300
      max_cols: 10
    cards: ...

Layout-card

If needed, any layout can also be used inside a lovelace-card by using layout-card:

type: custom:layout-card
layout_type: custom:masonry-layout
layout:
  width: 300
  max_cols: 10
cards: ...

Layout-card will take its cards and place them within itself according to the specified layout.

layout: takes the same options as is the view configuration for a layout.

NOTE: Please be aware that layout-card is itself a CARD, and cannot be wider than any other cards in the same view.
All cards you specify within it must fit inside this same width.
Thus layout-card is of limited use except in panel mode.

NOTE 2: The "default" layout option for layout-card (which you'll see if you're using the GUI lovelace editor) uses the default layout engine of lovelace. It's basically the same as the Horizontal layout, but without any options, without being able to hide cards and with the number of columns based on the width of the window rather than the layout-card.
I don't recommend using it, but it's there.

Card layout options

For some layout types, special options can be attached to each card. This is done in the view_layout parameter, e.g:

type: entities
entities:
  - light.bed_light
view_layout:
  column: 2

Layout-break card

Layout card adds a special card called layout-break which can be used to change how some layouts work.

type: custom:layout-break

Layouts

Layout-card introduces four layouts.

  • Masonry
  • Horizontal
  • Vertical
  • Grid

The first three are column based and work similarly:

  • A number of evenly sized columns is prepared based on available space, the width option and the max_cols option.
  • The cards are placed into the columns one at a time in a method depending on the current layout.
  • Any empty columns are removed.
  • The remaining columns are placed centered on screen.

All column based layouts accept the following layout options:

Option Values Description Default
width number Size in pixels of each column 300
max_width number Maximum width of a card 1.5 * width if specified
otherwise 500
max_cols number Maximum number of columns to show 4 if sidebar is hidden
3 if sidebar is shown
rtl true/false Place columns in right-to-left order false
column_widths special A grid-template-columns specification of column widths none
margin string A CSS margin applied to the layout itself 4px 4px 0px 4px
padding string A CSS padding applied to the layout itself 0px
height string A CSS height applied to the layout itself auto
card_margin string CSS margin applied to each card in the layout var(--masonry-view-card-margin, 4px 4px 8px)
reflow true/false If true the layout will get reorganized when cards are hidden (e.g. with conditional or entity-filter cards). May cause performance issues. false

NOTE: Even if column_widths is specified, the number of columns displayed will only depend on the available space, width and max_cols. If you get weird results, consider the Grid Layout.

NOTE 2: If you're migrating from layout-card "1.0" (v16 - sorry about the version number confusion), this is significantly fewer options than you are used to.
The reason for this is twofold.
First: Maintainability. As Home Assistant and Lovelace evolves, it grows increasingly more difficult to keep up the more options you want to keep alive.
Second: Usability. I want to focus on fewer options and doing the right thing out of the box instead. And the three remaining options actually have much more impact than you'd think.

If you want more fine-grained controll (e.g. variable sized columns), please take a look at the Grid layout.

In general, I recommend starting over with a grid view, rather than trying to convert an old layout-card based setup. You'll likely have better results.

Masonry layout

The masonry layout imitates the default layout of lovelace.

  • Each card is assigned a height based on their contents. One height unit corresponds to roughly 50 pixels, but this may vary.
  • When a card is placed in the layout, it is put in the first column which has a total height of less than min_height units.
    Otherwise it is put it the shortest column.

Masonry Layout

The masonry layout accepts the following layout options (besides the ones mentioned above):

Option Values Description Default
min_height number Minimum number of card height units in a column before the next one is considered 5

Horizontal layout

The horizontal layout will add each card to the next column, looping back to the first one when necessary:

Horizontal Layout

A layout-break card will cause the next card to be placed in the first column.

The horizontal layout accepts the following card view_layout options:

Option Values Description Default
column number Which column to place the card in. Following cards will be placed in the next column.

Vertical layout

The vertical layout will add each card to the same column as the previous one.

Vertical Layout

A layout-break card will cause the next card to be placed in the next column.

The vertical layout accepts the following card view_layout options:

Option Values Description Default
column number Which column to place the card in. Following cards will be placed in the same column.

Grid layout

The grid layout will give you full controll of your cards by leveraging CSS Grid.

The grid layout accepts any option starting with grid- that works for a Grid Container as well as grid, place-items and place-content. The layout options margin, padding and height also apply as for column based layouts.

Furthermore, the special option mediaquery can be used to set grid options depending on currently matched @media rules. This helps immensely in creating fully responsive layouts.
Please see the example code accompanying the screen recording below.
Note that only the first matching rule will be applied.

For the card view_layout options. the grid layout accepts any css grid property starting with grid- that works for a Grid Item as well as place-self.

There's no point in me trying to list all grid- options here. Instead see the excellent guide linked above.

Grid Layout

Yaml code

Configuration for view:

title: Grid layout
type: custom:grid-layout
layout:
  grid-template-columns: auto 30px 25%
  grid-template-rows: auto
  grid-template-areas: |
    "header header header"
    "main . sidebar"
    "footer footer footer"
  mediaquery:
    "(max-width: 600px)":
      grid-template-columns: 100%
      grid-template-areas: |
        "header"
        "sidebar"
        "main"
        "footer"
    "(max-width: 800px)":
      grid-template-columns: 50% 50%
      grid-template-areas: |
        "header sidebar"
        "main main"
        "footer footer"
cards:
  - type: entities
    entities:
      - entity: light.bed_light
    title: "1"
    show_header_toggle: false
    view_layout:
      grid-area: header
  - type: entities
    entities:
      - entity: light.bed_light
    title: "2"
    show_header_toggle: false
    view_layout:
      grid-area: footer
  - type: entities
    entities:
      - entity: light.bed_light
    title: "3"
    show_header_toggle: false
    view_layout:
      grid-area: sidebar
  - type: entities
    entities:
      - light.bed_light
      - light.ceiling_lights
      - light.kitchen_lights
    title: "4"
    show_header_toggle: false
    view_layout:
      grid-area: main

Card visibility

Individual cards can be displayed or hidden with the view_layout option show, e.g:

- type: entities
  title: Always show
  ...
  view_layout:
    show: always
- type: entities
  title: Never show
  ...
  view_layout:
    show: never

The options show: always and show: never are honestly quite pointless... but there's a cooler option:

type: entities
title: Never show
---
view_layout:
  show:
    mediaquery: <mediaquery>

This card will only be displayed if the @media rule <mediaquery> is a match.

Example:

- type: markdown
  content: |
    This is only shown on screens more than 800 px wide
  view_layout:
    show:
      mediaquery: "(min-width: 800px)"
- type: markdown
  content: |
    This is only shown on screens less than 400 px wide
  view_layout:
    show:
      mediaquery: "(max-width: 400px)"
- type: markdown
  content: |
    This is only shown on touch screen devices
  view_layout:
    show:
      mediaquery: "(pointer: coarse)"

Another option is this:

- type: entities
  title: Show only when sidebar is hidden
  view_layout:
    show:
      sidebar: hidden
- type: entities
  title: Show only when sidebar is visible
  view_layout:
    show:
      sidebar: shown

Gap-card

Layout card includes gap-card which can be used to insert empty space in any layout:

type: custom:gap-card
height: <height (optional)>
size: <size (optional)>

height is the height of the gap in pixels (default: 50)

size is the height of the card the layout engine will see in height units (default: pixel height / 50)

Use with entity filters

Layout card can be used with cards that populate an entities: list, like Entity Filter or auto-entities.

If no card type is explicitly specified for the entries, the Entity card will be used.

Example:

- type: 'custom:auto-entities'
        filter:
          include:
            - domain: light
              options:
                type: light
            - domain: sensor
          exclude: []
        card:
          type: 'custom:layout-card'
          cards: []
          layout_type: masonry

auto-entities


Buy Me A Coffee