Skip to content

Latest commit

 

History

History
473 lines (384 loc) · 29.2 KB

Readme.md

File metadata and controls

473 lines (384 loc) · 29.2 KB

EDK II Minimum Platform Firmware for Intel® Platforms

The Minimum Platform is a software architecture that guides uniform delivery of Intel platforms enabling firmware solutions for basic boot functionality with extensibility built-in. Please see the EDK II Minimum Platform Draft Specification for more details.

Package maintainers for the Minimum Platform projects are listed in Maintainers.txt.

Overview

The key elements of the architecture are organized into a staged boot approach where each stage has requirements and functionality for specific use cases. The generic control flow through the boot process is implemented in the MinPlatformPkg. The generic nature of the tasks performed in MinPlatformPkg lends to reuse across all Intel platforms with no source modification. Details for any particular board are made accessible to the MinPlatformPkg through a well-defined statically linked board API. A complete platform solution then consists of the MinPlatformPkg and a compatible board package.

Board Naming Convention

The board packages supported by Intel follow the naming convention <xxx>OpenBoardPkg where xxx refers to the encompassing platform name for a particular platform generation. For example, the KabylakeOpenBoardPkg contains the board code for Intel KabyLake reference systems. Intel uses the moniker "OpenBoardPkg" to indicate that this package is the open source board code. A closed source counterpart may exist which simply uses "BoardPkg". Both directly use the MinPlatformPkg from edk2-platforms.

Stage Selection

Stage selection is controlled via the PCD gMinPlatformPkgTokenSpaceGuid.PcdBootStage in MinPlatformPkg.dec. The stage should be configured in the board package DSC file to the appropriate value. For example, a board may disable all advanced features by setting this value to 4 instead of 6. This may be used to improve boot time for a particular use case. Decrementing the stage can also be used for debug since only the actions required for that stage objective should be executed. As an example, ACPI initialization is not required for a Stage 3 boot.

The stages are defined as follows:

Stage Functional Objective Example Capabilities
I Minimal Debug Serial port output, source debug enabled, hardware debugger enabled
II Memory Functional Basic hardware initialization necessary to reach memory initialization, permanent memory available
III Boot to UI Simple console input and output to a UI, UEFI shell
IV Boot to OS Boot an operating system with the minimally required features
V Security Enable UEFI Secure Boot, TCG measured boot, DMA protections
VI Advanced Feature Enable Firmware update, power management, non-essential I/O

Minimum Platform Firmware Solution Stack

A UEFI firmware implementation using MinPlatformPkg is constructed using the following pieces.

EDK II
Intel(r) FSP
Minimum Platform (MinPlatformPkg)
Board Support (<xxx>OpenBoardPkg)

Board Support

  • The KabylakeOpenBoardPkg contains board implementations for KabyLake systems.
  • The PurleyOpenBoardPkg contains board implementations for Purley systems.
  • The SimicsOpenBoardPkg contains board implementations for the Simics hardware simulator.
  • The WhiskeylakeOpenBoardPkg contains board implementations for WhiskeyLake systems.
  • The CometlakeOpenBoardPkg contains board implementations for CometLake systems.
  • The TigerlakeOpenBoardPkg contains board implementations for TigerLake systems.
  • The AlderlakeOpenBoardPkg contains board implementations for AlderLake systems.
  • The WhitleyOpenBoardPkg contains board implementations for Ice Lake-SP and Cooper Lake systems.

Supported Hardware

AAEON

Machine Name Supported Chipsets BoardPkg Board Name
UP Xtreme Whiskey Lake WhiskeylakeOpenBoardPkg UpXtreme

Acer

Aspire VN7-572G Laptop

Machine Name Supported Chipsets BoardPkg Board Name
Aspire VN7-572G SkyLake KabylakeOpenBoardPkg AspireVn7Dash572G

Intel

Intel Reference and Validation Platform

Machine Name Supported Chipsets BoardPkg Board Name
RVP 3 SkyLake, KabyLake, KabyLake Refresh KabylakeOpenBoardPkg KabylakeRvp3
WHL-U DDR4 RVP WhiskeyLake WhiskeylakeOpenBoardPkg WhiskeylakeURvp
CML-U LPDDR3 RVP CometLake V1 CometlakeOpenBoardPkg CometlakeURvp
TGL-U DDR4 RVP TigerLake TigerlakeOpenBoardPkg TigerlakeURvp
ADL-P DDR5 RVP AlderLake AlderlakeOpenBoardPkg AlderlakePRvp
Wilson City RVP IceLake-SP (Xeon Scalable) WhitleyOpenBoardPkg WilsonCityRvp
Cooper City RVP Copper Lake WhitleyOpenBoardPkg CooperCityRvp

Note: RVP = Reference and Validation Platform

Open Compute Project (OCP)

Machine Name Supported Chipsets BoardPkg Board Name
Aowanda IceLake-SP (Xeon Scalable) WhitleyOpenBoardPkg Aowanda
Junction City IceLake-SP (Xeon Scalable) WhitleyOpenBoardPkg JunctionCity
Mt. Olympus Purley PurleyOpenBoardPkg BoardMtOlympus
TiogaPass Purley PurleyOpenBoardPkg BoardTiogaPass

Simics

Machine Name Supported Chipsets BoardPkg Board Name
Simics Quick Start Package Nehalem SimicsOpenBoardPkg BoardX58Ich10

System 76

Galago Pro Laptop

Machine Name Supported Chipsets BoardPkg Board Name
galp2 KabyLake KabylakeOpenBoardPkg GalagoPro3
galp3 & galp3-b KabyLake Refresh KabylakeOpenBoardPkg GalagoPro3

Board Package Organization

The board package follows the standard EDK II package structure with the following additional elements and guidelines:

  • Only code usable across more than one board at the root level.
  • Board-specific code in a directory. The directory name should match that of the board supported.
  • Features not essential to achieve stage 5 or earlier boots are maintained in edk2-platforms/Features/Intel.

Shared resources in the package root directory can include interfaces described in header files, library instances, firmware modules, binaries, etc. The UEFI firmware implementation is built using the process described below from the board-specific directory.

A board package must implement the board APIs defined in the MinPlatformPkg even if a "NULL" implementation is used to return back to the minimum platform caller.

Windows Build Instructions

Pre-requisites

  • GIT client: Available from https://git-scm.com/downloads
  • Microsoft Visual Studio.
    • Visual Studio 2015 recommended and is used in the examples below.
  • ASL compiler: Available from http://www.acpica.org
    • Install into C:\ASL to match default tools_def.txt configuration.
  • NASM assembler: Available from: http://www.nasm.us/
    • Install into C:\NASM to match default tools_def.txt configuration.
  • Python 3.7.3: Available from: https://www.python.org/downloads/release/python-373/
    • Other versions of Python 3.x should be compatible.
    • It is recommended to use the Python launcher to ensure the Python build script is launched using Python 3.
      • E.g. "py -3.7 build_bios.py -l"

Linux Build Instructions

Pre-requisites

Download the required components

  1. Create a new directory for the EDK II WORKSPACE.

  2. Download below repository to this WORKSPACE:

  • edk2 repository

    • git clone https://github.com/tianocore/edk2.git
  • edk2-platforms repository

    • git clone https://github.com/tianocore/edk2-platforms.git
  • edk2-non-osi repository

    • git clone https://github.com/tianocore/edk2-non-osi.git
  • FSP repository

    • git clone https://github.com/IntelFsp/FSP.git

Board Builds

Building with the python script

  1. Open command window, go to the workspace directory, e.g. c:\Edk2Workspace or ~/Edk2Workspace in the case of a linux OS
  2. If using a linux OS
    • Type "cd edk2"
    • Type "source edksetup.sh"
    • Type "cd ../" to go back to the workspace directory
  3. Type "cd edk2-platforms/Platform/Intel
  4. Type "python build_bios.py -p REPLACE_WITH_BOARD_NAME"
  • build_bios.py arguments:

    Argument Function
    -h, --help show this help message and exit
    --platform, -p the platform to build
    --toolchain, -t tool Chain to use in build process
    --DEBUG, -d debug flag
    --RELEASE, -r release flag
    --TEST_RELEASE, -tr test Release flag
    --RELEASE_PDB, -rp release flag
    --list, -l lists available platforms
    --cleanall cleans all
    --clean cleans specified platform
    --capsule capsule build enabled
    --silent silent build enabled
    --performance performance build enabled
    --fsp fsp wrapper build enabled
    --fspapi API mode fsp wrapper build enabled
    --hash Enable hash-based caching
    --binary-destination create cache in specified directory
    --binary-source Consume cache from directory
  • For more information on build options

    • Type "python build_bios.py -h"
  • Note

    • The Python build scripts were compatible with Python 2.7.16. But Python 2.x support is no longer maintained or recommended.

    • This python build script has been tested on Windows 10 and Ubuntu 18.04.1 LTS.

    • Unless otherwise noted, all boards build with the following components and versions:

      • Linux build: Ubuntu 18.04.1 LTS with GCC version 5.4.0
      • Windows build: Windows 10 with the Microsoft Visual Studio 2015 compiler
      • iASL version: 20190816
      • NASM version: 2.12.02
    • Unless otherwise noted all boards have been tested for boot to Windows 10 x64 RS3.

    • See known limitations

  • Configuration Files

    • The edk2-platforms\Platform\Intel\build.cfg file contains the default settings used by build_bios.py
    • The default settings are under the DEFAULT_CONFIG section
    • Each board can have a settings file that will override the edk2-platforms\Platform\Intel\build.cfg settings
    • An example of a board specific settings:
      • edk2-platforms\Platform\Intel\KabylakeOpenBoardPkg\KabylakeRvp3\build_config.cfg
  • Workspace view of the build scripts

    • WORKSPACE
            |------edk2
            |------edk2-non-osi
            |------edk2-platforms
            |       |---Platform
            |       |    |--Intel
            |       |        |------build.cfg: Default build settings. These are overridden by
            |       |        |                 platform specific settings (build_config.cfg) and
            |       |        |                 then command-line settings.
            |       |        |
            |       |        |------build_bios.py: Main build script. Generic pre-build, build,
            |       |        |                     post-build, and clean functions.
            |       |        |
            |       |        |------KabylakeOpenBoardPkg
            |       |        |       |------GalagoPro3
            |       |        |       |       |---build_config.cfg: System 76 Galago Pro 3 specific build
            |       |        |       |                             settings environment variables.
            |       |        |       |------KabylakeRvp3
            |       |        |               |---build_config.cfg: KabylakeRvp3 specific
            |       |        |               |                     build settings, environment variables.
            |       |        |               |---build_board.py: Optional board-specific pre-build, build
            |       |        |                                   and clean post-build functions.
            |       |        |
            |       |        |------PurleyOpenBoardPkg
            |       |        |       |------BoardMtOlympus
            |       |        |       |       |---build_config.cfg: BoardMtOlympus specific
            |       |        |       |       |                     build settings, environment variables.
            |       |        |       |       |---build_board.py: Optional board-specific pre-build,
            |       |        |       |                           build, post-build and clean functions.
            |       |        |       |------BoardTiogaPass
            |       |        |               |---build_config.cfg: BoardTiogaPass specific
            |       |        |               |                     build settings, environment variables.
            |       |        |               |---build_board.py: Optional board-specific pre-build,
            |       |        |                                   build, post-build and clean functions.
            |       |        |
            |       |        |------SimicsOpenBoardPkg
            |       |        |       |------BoardX58Ich10
            |       |        |               |---build_config.cfg: BoardX58Ich10 specific
            |       |        |                                     build settings, environment variables.
            |       |        |
            |       |        |------WhitleyOpenBoardPkg
            |       |        |       |------Aowanda
            |       |        |       |       |---build_config.cfg: Aowanda  specific build
            |       |        |       |       |                     settings environment variables.
            |       |        |       |       |---build_board.py: Board-specific pre-build,
            |       |        |       |                           build, post-build and clean functions.
            |       |        |       |------CooperCityRvp
            |       |        |       |       |---build_config.cfg: CooperCityRvp specific build
            |       |        |       |       |                     settings environment variables.
            |       |        |       |       |---build_board.py: Board-specific pre-build,
            |       |        |       |                           build, post-build and clean functions.
            |       |        |       |------JunctionCity
            |       |        |       |       |---build_config.cfg: CooperCityRvp specific build
            |       |        |       |       |                     settings environment variables.
            |       |        |       |       |---build_board.py: Board-specific pre-build,
            |       |        |       |                           build, post-build and clean functions.
            |       |        |       |------WilsonCityRvp
            |       |        |               |---build_config.cfg: WilsonCityRvp specific build
            |       |        |               |                     settings environment variables.
            |       |        |               |---build_board.py: Board-specific pre-build,
            |       |        |                                   build, post-build and clean functions.
            |       |        |
            |       |        |------WhiskeylakeOpenBoardPkg
            |       |        |       |------UpXtreme
            |       |        |       |       |---build_config.cfg: UpXtreme specific build
            |       |        |       |                             settings environment variables.
            |       |        |       |------WhiskeylakeURvp
            |       |        |               |---build_config.cfg: WhiskeylakeURvp specific build
            |       |        |                                     settings environment variables.
            |       |        |
            |       |        |------CometlakeOpenBoardPkg
            |       |        |       |------CometlakeURvp
            |       |        |               |---build_config.cfg: CometlakeURvp specific build
            |       |        |                                     settings environment variables.
            |       |        |
            |       |        |------TigerlakeOpenBoardPkg
            |       |        |       |------TigerlakeURvp
            |       |        |               |---build_config.cfg: TigerlakeURvp specific build
            |       |        |                                     settings environment variables.
            |       |        |
            |       |        |------AlderlakeOpenBoardPkg
            |       |        |       |------AlderlakePRvp
            |       |        |               |---build_config.cfg: AlderlakePRvp specific build
            |       |        |                                     settings environment variables.
            |       |        |
            |------FSP
      

Building with the batch scripts

Only PurleyOpenBoardPkg still supports batch script build (in addition to Python build). Batch scripts are deprecated and will be removed from PurleyOpenBoardPkg in the future. All other board packages must only use the Python build infrastructure.

For PurleyOpenBoardPkg

  1. Open command window, go to the workspace directory, e.g. c:\Edk2Workspace.
  2. Type "cd edk2-platforms\Platform\Intel\PurleyOpenBoardPkg\BoardMtOlympus".
  3. Type "GitEdk2MinMtOlympus.bat" to setup GIT environment.
  4. Type "bld" to build Purley Mt Olympus board UEFI firmware image, "bld release" for release build, "bld clean" to remove intermediate files."bld cache-produce" Generate a cache of binary files in the specified directory, "bld cache-consume" Consume a cache of binary files from the specified directory, BINARY_CACHE_PATH is empty, used "BinCache" as default path.

For PurleyOpenBoardPkg (TiogaPass)

  1. Open command window, go to the workspace directory, e.g. c:\Edk2Workspace.
  2. Type "cd edk2-platforms\Platform\Intel\PurleyOpenBoardPkg\BoardTiogaPass".
  3. Type "GitEdk2MinBoardTiogaPass.bat" to setup GIT environment.
  4. Type "bld" to build Purley BoardTiogaPass board UEFI firmware image, "bld release" for release build, "bld clean" to remove intermediate files."bld cache-produce" Generate a cache of binary files in the specified directory, "bld cache-consume" Consume a cache of binary files from the specified directory, BINARY_CACHE_PATH is empty, used "BinCache" as default path.
  5. Final BIOS image will be Build\PurleyOpenBoardPkg\BoardTiagoPass\DEBUG_VS2015x86\FV\PLATFORM.fd or Build\PurleyOpenBoardPkg\BoardTiagoPass\RELEASE_VS2015x86\FV\PLATFORM.fd, depending on bld batch script input.
  6. This BIOS image needs to be merged with SPS FW

Known limitations

KabylakeOpenBoardPkg GalagoPro3

  1. The firmware project has not been tested on the Galago Pro 3B.

KabylakeRvp3

  1. This firmware project has only been tested for Microsoft Windows 10 x64 boot with AHCI mode and Integrated Graphic Device.

PurleyOpenBoardPkg

  1. This firmware project has only been tested booting to Microsoft Windows Server 2016 with NVME on M.2 slot.
  2. This firmware project does not build with the GCC compiler.
  3. The validated version of iASL compiler that can build MinPurley is 20180629. Older versions may generate ACPI build errors.

PurleyOpenBoardPkg Tioga Pass

  1. This firmware project has only been tested on the Tioga Pass hardware.

  2. This firmware project build has only been tested using the Microsoft Visual Studio 2015 build tools.

  3. This firmware project does not build with the GCC compiler.

  4. The validated version of iASL compiler that can build MinPurley is 20180629. Older versions may generate ACPI build errors.

  5. Installed and booted to UEFI Windows 2016 on M.2 NVME slot

  6. Installed and booted to UEFI Windows 2019 on M.2 NVME slot and with SATA HDD.

  7. Installed and booted to UEFI RHEL 7.3 on SATA HDD

  8. Installed and booted to Ubuntu 18.04 on M.2 NVME slot.

  9. Verified Mellanox card detection during POST and OS

  10. LINUX Boot Support (PcdLinuxBootEnable needs to be enabled)

  11. Follow directions on http://osresearch.net/Building/ to compile the heads kernel and initrd for qemu-system_x86_64

  12. Copy the following built files (1) initrd.cpio.xz to LinuxBootPkg/LinuxBinaries/initrd.cpio.xz (2) bzimage to LinuxBootPkg/LinuxBinaries/linux.efi

SimicsOpenBoardPkg

  1. This firmware project has only been tested booting to Microsoft Windows 10 x64 and Ubuntu 17.10 with AHCI mode.

WhiskeylakeOpenBoardPkg

  1. This firmware project has mainly been tested booting to Microsoft Windows 10 x64 with AHCI mode and Integrated Graphic Device.
  2. UP Xtreme boards might hang during Windows 10 boot.
  3. The UP Xtreme boards below boot to x64 windows 10 home edition and Ubuntu 18.04
    • UP Xtreme Intel(R) Core(TM) i3-8145UE CPU @ 2.20GHz with 8GB RAM
    • UP Xtreme Intel(R) Core(TM) i7-8565U CPU @ 1.80GHz with 16GB RAM
    • UP Xtreme Intel(R) Core(TM) i7-8665UE CPU @ 1.70GHz with 16GB RAM
    • UP Xtreme Intel(R) Celeron(R) CPU 4305UE @ 2.00GHz with 4GB RAM

CometlakeOpenBoardPkg

  1. This firmware project has been tested booting to Microsoft Windows 10 x64 with AHCI mode and External Graphic Device.
  2. This firmware project has been also tested booting to Ubuntu 17.10 with AHCI mode and Integrated Graphic Device.

TigerlakeOpenBoardPkg

  1. This firmware project has been tested booting to Microsoft Windows 10 x64 with AHCI mode and Integrated Graphic Device.
  2. This firmware project has been also tested booting to Puppy Linux BionicPup64 8.0 with AHCI mode and Integrated Graphic Device.

AlderlakeOpenBoardPkg

  1. This firmware project has been tested booting to Microsoft Windows 11 x64 with M2 SSD Disk and Integrated Graphic Device.
  2. AlderlakeOpenBoardPkg/Acpi/MinDsdt has been modified from MinPlatformPkg/Acpi/MinDsdt to avoid hang on boot to Microsoft Windows 11 x64.

WhitleyOpenBoardPkg

  1. This firmware project has been tested booting to UEFI shell with headless serial console

JunctionCity

  1. This firmware project has been tested booting to UEFI shell
  2. Booted to RHEL 8.2, Ubuntu 18.04 using U2 NVME Disk
  3. Booted to Windows 2019 using M2 SSD Disk
  4. Booted to Ubuntu 18.04,Windows 2019, RHEL 8.3 using SATA HDD
  5. Connected PCIE Network card and made sure PCIE card detected in POST and in OS
  6. Verified TPM offboard chip detection

Aowanda

  1. This firmware project has been tested booting to UEFI shell
  2. Installed and booted to RHEL 8.3 using M2 SSD disk
  3. Installed and booted to Windows 2019 using M2 SSD disk
  4. Verified TPM chip detection

Note: For the network boot using the onboard Intel network card, please download the UEFI UNDI driver (E9712X3.efi) from https://www.intel.com/content/www/us/en/download/15755/intel-ethernet-connections-boot-utility-preboot-images-and-efi-drivers.html and include it in PlatformPkg.fdf.

Package Builds

In some cases, such as BoardModulePkg, a package may provide a set of functionality that is included in other packages. To test the build of the whole package, the "build" command should be used following the instructions below.

  1. Execute edksetup.bat (Windows) or edksetup.sh (Linux).
  2. Verify the "WORKSPACE" environment variable is set to the edk2 directory in your workspace.
  3. Set the "PACKAGES_PATH" environment variable to include the edk2-platforms/Platform/Intel, edk2-platforms/Silicon/Intel, and edk2-platforms/Features/Intel directories.
    • Windows example: set PACKAGES_PATH=c:\Edk2Workspace\edk2-platforms\Platform\Intel; c:\Edk2Workspace\edk2-platforms\Silicon\Intel;c:\Edk2Workspace\edk2-platforms\Features\Intel
  4. Build the package by specifying the package DSC as the platform build target from the Platform/Intel or Silicon/Intel directory: "build -p BoardModulePkg/BoardModulePkg.dsc -a IA32 -a X64"

Firmware Image Flashing

The full Intel firmware image on a flash device is called the Integrated Firmware Image (IFWI). Users with access to the Intel proprietary FITC tool and ME ingredients can build full IFWI images that may be flashed (Descriptor, UEFI FW, ME FW, etc.).

Users without such access can directly flash a custom built UEFI FW image over the highest area of the flash region directly. It is always recommended to have a hardware flash programmer accessible to recover the firmware image. The original full flash image should always be backed up so it may be flashed again for recovery. Please be aware that if a system supports a technology that authenticates the initial firmware boot image such as Boot Guard, it will fail to boot with a custom firmware image that is not signed properly.

Planned Activities

  • Expand Intel's open source platform code presence through new platform and board support.
  • Expand advanced feature code and quality.
  • Support open source community continuous integration for Minimum Platform compliant boards.

Ideas

If you would like to help but are not sure where to start some areas currently identified for improvement include:

  • Adding board ports for more motherboards and systems
  • Adding Clang support

Please feel free to contact Isaac Oram (isaac.w.oram at intel.com) if you would like to discuss contribution ideas.