v0.74.0.30

[tillt]

• adds a preliminary fuzzing dialog for bruteforcing the lightguide and other control commands for MK3 controllers

---

This discussion was created from the release v0.74.0.30.

[tillt]

For testing, please start the application and then go into the menu to select Fuzzing MK3. That should bring up a new window.

1. leave the delay slider as is to save your valuable time
2. press Start
3. observe the Current Message text field -- it will show the entire command string sent to the controller. The first displayed value is the actual command used. That value will quickly increase and run all the way until it hits FF.
4. did the lightguide show any changes until FF was hit?
5. if YES -> press Stop, raise the delay with that slider to something higher - like in the middle of the range. Press Start again and try to see which exact value was changing anything lighting (lightguide and or button lighting). If you missed the exact point, dont worry - let it run through FF and overflow as it will use a new color in the next round, making the change obvious.
6. if NO -> darn, we didn't find anything useful this way

Any command value that had any visible effect on the controller is interesting to me.

If run with an MK2 controller, we will see that 80 changes button lighting, 81 changes lightguide, A0 does something as well.