Releases: metalman3797/Cura-Dremel-Printer-Plugin
Release 1.0.0
Added SILK, TPU and MATTE materials.
Added material colors for each filament.
Added proper 3D45 build plate.
Minor profile improvements.
Fixed bug in profile where speed set to 0.
Full Changelog: 0.8.1...1.0.0
Release 0.8.1
New Features & Bugfixes:
- Removed an artifact affecting print quality in certain cases by removing the slowdown when a wall had an overhanging section. This artifact was especially visible on the 3D calibration cube "X" face.
Thanks to user Troy McFarland of the Pacific Science Center for raising the issue.
before:
now:
Notes:
- This plugin is included in Cura's Marketplace - users are encouraged to download the plugin directly from the Cura Marketplace. To install this plugin manually, simply download the .curapackage and drag the .curapackage onto your Cura window, and Cura will install the plugin.
- This version of the plugin is not compatible with earlier versions of Cura. For a version that works with earlier Cura versions see the table below:
| Cura Version | Last version of the 3D20 plugin that works with the version of Cura | Supported Printers |
|---|---|---|
| 5.0 through 5.1 | version 0.8.1 | 3D20, 3D40*FAQ1, 3D45 |
| 4.4 through 4.13.1 | version 0.7.2 | 3D20, 3D40*FAQ1, 3D45 |
| 3.5 through 4.3 | version 0.5.9 | 3D20 |
| 3.4 or 3.4.1 | version 0.4.8 | 3D20 |
| 3.3 or 3.3.1 | version 0.4.3 | 3D20 |
| 3.2 or 3.2.1 | version 0.4.2 | 3D20 |
| 3.0 or 3.1 | version 0.2.5 | 3D20 |
Release 0.8.0
New Features & Bugfixes:
- Updated plugin for compatibility with Cura 5.0
Notes:
- This plugin is included in Cura's Marketplace - users are encouraged to download the plugin directly from the Cura Marketplace. To install this plugin manually, simply download the .curapackage and drag the .curapackage onto your Cura window, and Cura will install the plugin.
- This version of the plugin is not compatible with earlier versions of Cura. For a version that works with earlier Cura versions see the table below:
| Cura Version | Last version of the 3D20 plugin that works with the version of Cura | Supported Printers |
|---|---|---|
| 5.0 | version 0.8.0 | 3D20, 3D40*FAQ1, 3D45 |
| 4.4 through 4.13.1 | version 0.7.2 | 3D20, 3D40*FAQ1, 3D45 |
| 3.5 through 4.3 | version 0.5.9 | 3D20 |
| 3.4 or 3.4.1 | version 0.4.8 | 3D20 |
| 3.3 or 3.3.1 | version 0.4.3 | 3D20 |
| 3.2 or 3.2.1 | version 0.4.2 | 3D20 |
| 3.0 or 3.1 | version 0.2.5 | 3D20 |
Release 0.7.2
Note:
This plugin is included in Cura's Marketplace - users are encouraged to download the plugin directly from the Cura Marketplace. To install this plugin manually, simply download the .curapackage and drag the .curapackage onto your Cura window, and Cura will install the plugin.
New Features & Bugfixes:
- Added the ability to view the Dremel 3D45 camera from a window within Cura.
- Note: This version will not work with the changes that Ultimaker made to Cura version 5.0 and onward. I hope to have a 5.0 compatible version of this plugin soon.
For a version that works with earlier Cura versions see the table below:
| Cura Version | Last version of the 3D20 plugin that works with the version of Cura | Supported Printers |
|---|---|---|
| 4.4 through 4.13.1 | version 0.7.2 | 3D20, 3D40*FAQ1, 3D45 |
| 3.5 through 4.3 | version 0.5.9 | 3D20 |
| 3.4 or 3.4.1 | version 0.4.8 | 3D20 |
| 3.3 or 3.3.1 | version 0.4.3 | 3D20 |
| 3.2 or 3.2.1 | version 0.4.2 | 3D20 |
| 3.0 or 3.1 | version 0.2.5 | 3D20 |
Release 0.7.1
Note:
This plugin is included in Cura's Marketplace - users are encouraged to download the plugin directly from the Cura Marketplace. To install this plugin manually, simply download the .curapackage and drag the .curapackage onto your Cura window, and Cura will install the plugin.
New Features & Bugfixes:
- Fixed a bug where the plugin would re-install the printer definition files every time Cura started.
- Hid some additional incompatible materials on the 3D20 and 3D40 that are included with Cura by default.
- Updated the acceleration and jerk settings for the printers. The new default settings are as follows:
| Setting | 3D20 | 3D40 | 3D45 |
|---|---|---|---|
| accel enabled | true | false | true |
| jerk enabled | true | false | true |
| acceleration_print* | 200 | 200 | 800 |
| acceleration_travel* | 1000 | 1000 | 1200 |
| acceleration_travel_layer_0* | 200 | 200 | 1000 |
| jerk_print^ | 5.0 | 5.0 | 8.0 |
| jerk_travel^ | 5.0 | 5.0 | 8.0 |
| jerk_travel_layer_0^ | 5.0 | 5.0 | 8.0 |
* = when the acceleration setting is enabled
^ = when the jerk setting is enabled
For a version that works with earlier Cura versions see the table below:
| Cura Version | Last version of the 3D20 plugin that works with the version of Cura | Supported Printers |
|---|---|---|
| 4.4 through 4.11 | version 0.7.1 | 3D20, 3D40*FAQ1, 3D45 |
| 3.5 through 4.3 | version 0.5.9 | 3D20 |
| 3.4 or 3.4.1 | version 0.4.8 | 3D20 |
| 3.3 or 3.3.1 | version 0.4.3 | 3D20 |
| 3.2 or 3.2.1 | version 0.4.2 | 3D20 |
| 3.0 or 3.1 | version 0.2.5 | 3D20 |
Release 0.7.0
Note:
This plugin is included in Cura's Marketplace - users are encouraged to download the plugin directly from the Cura Marketplace. To install this plugin manually, simply download the .curapackage and drag the .curapackage onto your Cura window, and Cura will install the plugin.
New Features & Bugfixes:
- Added Dremel 3D45, Dremel 3D40 printers in addition to the 3D20
- Renamed the plugin from Dremel-3D20-Plugin to Dremel-Printer-Plugin
- Added Dremel ECO ABS, Dremel PETG, Dremel Nylon, and split Dremel PLA into two materials (the older 0.5kg spools and the newer 0.75kg spools)
- Hid many more unsupported materials that are included by default with Cura from 3D20 and 3D40 list of available materials
- The 3D40 per-quality-per-material settings are untested. Please help by suggesting improvements to the settings.
For a version that works with earlier Cura versions see the table below:
| Cura Version | Last version of the 3D20 plugin that works with the version of Cura | Supported Printers |
|---|---|---|
| 4.4 through 4.10 | version 0.7.0 | 3D20, 3D40*FAQ1, 3D45 |
| 3.5 through 4.3 | version 0.5.9 | 3D20 |
| 3.4 or 3.4.1 | version 0.4.8 | 3D20 |
| 3.3 or 3.3.1 | version 0.4.3 | 3D20 |
| 3.2 or 3.2.1 | version 0.4.2 | 3D20 |
| 3.0 or 3.1 | version 0.2.5 | 3D20 |
Release 0.6.4
Note:
This plugin is included in Cura's Marketplace - users are encouraged to download the plugin directly from the Cura Marketplace. To install this plugin manually, simply download the .curapackage and drag the .curapackage onto your Cura window, and Cura will install the plugin.
New Features & Bugfixes:
- The generic icon that is used when screenshots fail will now be the plugin's icon
- Updated code to remove a deprecated function call making the plugin more future-proof
- Added license file to the plugin
For a version that works with earlier Cura versions see the table below:
| Cura Version | Newest version of the plugin that works with the version of Cura |
|---|---|
| 4.4 to 4.8 | version 0.6.4 |
| 3.5 to 4.3 | version 0.5.9 |
| 3.4 or 3.4.1 | version 0.4.8 |
| 3.3 or 3.3.1 | version 0.4.3 |
| 3.2 or 3.2.1 | version 0.4.2 |
| 3.0 or 3.1 | version 0.2.5 |
Release 0.6.3
Note:
This plugin is included in Cura's Marketplace - users are encouraged to download the plugin directly from the Cura Marketplace. To install this plugin manually, simply download the .curapackage and drag the .curapackage onto your Cura window, and Cura will install the plugin.
New Features & Bugfixes:
- Changed the default setting for the "Support Overhang Angle" for the medium (0.2mm layer height) print profile from 2 degrees to 62 degrees.
For a version that works with earlier Cura versions see the table below:
| Cura Version | Newest version of the plugin that works with the version of Cura |
|---|---|
| 4.4 to 4.8 | version 0.6.3 |
| 3.5 to 4.3 | version 0.5.9 |
| 3.4 or 3.4.1 | version 0.4.8 |
| 3.3 or 3.3.1 | version 0.4.3 |
| 3.2 or 3.2.1 | version 0.4.2 |
| 3.0 or 3.1 | version 0.2.5 |
Release 0.6.2
Note:
This plugin is included in Cura's Marketplace - users are encouraged to download the plugin directly from the Cura Marketplace. To install this plugin manually, simply download the .curapackage and drag the .curapackage onto your Cura window, and Cura will install the plugin.
New Features & Bugfixes:
- Fixed a bug where in certain rare circumstances taking the screenshot for the preview image would fail and cause the plugin to crash instead of using the default cura icon.
For a version that works with earlier Cura versions see the table below:
| Cura Version | Newest version of the plugin that works with the version of Cura |
|---|---|
| 4.4 to 4.5 | version 0.6.2 |
| 3.5 to 4.3 | version 0.5.9 |
| 3.4 or 3.4.1 | version 0.4.8 |
| 3.3 or 3.3.1 | version 0.4.3 |
| 3.2 or 3.2.1 | version 0.4.2 |
| 3.0 or 3.1 | version 0.2.5 |
Release 0.6.1
Note:
This plugin is included in Cura's Marketplace - users are encouraged to download the plugin directly from the Cura Marketplace. To install this plugin manually, simply download the .curapackage and drag the .curapackage onto your Cura window, and Cura will install the plugin.
New Features & Bugfixes:
- Plugin supports Cura 4.4 & 4.5
- Fixed a bug introduced in version 0.6.0 where users slicing with custom settings would see an error message related to the settings not being properly written as comments to the end of the .g3drem file
For a version that works with earlier Cura versions see the table below:
| Cura Version | Newest version of the plugin that works with the version of Cura |
|---|---|
| 4.4 to 4.5 | version 0.6.1 |
| 3.5 to 4.3 | version 0.5.9 |
| 3.4 or 3.4.1 | version 0.4.8 |
| 3.3 or 3.3.1 | version 0.4.3 |
| 3.2 or 3.2.1 | version 0.4.2 |
| 3.0 or 3.1 | version 0.2.5 |