Black screen without any response.

[wlya]

Hi, I read your post and also https://octoperf.com/blog/2018/10/22/thinkpad-t460-how-to-install-macos/.
I'm using T460s (i7 6600u/16g/512g SSD/HD 520).
In others case, their screenshot of clover home screen, the first option is "boot macos install from install macos xxxxxxx", but my case is "start ueft shell 64", seems that clover does not recognize my macos disk partition.
Then I try to use "start ueft shell 64", but it only shows black screen without any response.
I already config the correct BIOS CONFIG, MACOS USB INSTALLER.The picture below is my macos USB installer, the first partition is EFI, the second is macos.

Thanks a lot.

[tluck]

hmm. i have no idea why it wont boot Clover? are you sure you have copied the ESP stuff from here to your USB ESP? and boot from USB you should at at least see Clover? make sure you set the bios up:

Security > Memory Protection > Execution Prevention: Set to Enabled,
Security > Virtualization: disable all options,
Security > Secure Boot Configuration: disable Secure Boot
Startup > UEFI/Legacy Boot: Set to UEFI Only and CMS Support to No

you may have to wipe and reformat your main SSD since the default layout on the disk from Lenovo or Windows puts things in expected locations etc.

Really nice job to @jerome on octoperf site - who created a fantastic guide with step by step pictures!

[wlya]

hmm. i have no idea why it wont boot Clover? are you sure you have copied the ESP stuff from here to your USB ESP? and boot from USB you should at at least see Clover? make sure you set the bios up:

Security > Memory Protection > Execution Prevention: Set to Enabled,
Security > Virtualization: disable all options,
Security > Secure Boot Configuration: disable Secure Boot
Startup > UEFI/Legacy Boot: Set to UEFI Only and CMS Support to No

you may have to wipe and reformat your main SSD since the default layout on the disk from Lenovo or Windows puts things in expected locations etc.

Really nice job to @jerome on octoperf site - who created a fantastic guide with step by step pictures!

The usb writer software problem, Tramsmac and Dmg2img both failed , I write it again in macos then success.

[wlya]

But for some reason, my t460s "PrtSc" key not working, Karabiner viewer just cannot recognize "PrtSc" key event.
VoodooPS2Keyboard.kext installed.
What configure item causes these in "https://github.com/tluck/Lenovo-T460-Clover/blob/master/EFI/CLOVER/kexts/Other/VoodooPS2Controller.kext/Contents/PlugIns/VoodooPS2Keyboard.kext/Contents/Info.plist"?