You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
Dear all
I’m the manager of FReDNet that is a permanent GNNS receivers network located in Friuli (N-E of Italy).
I’ve just started to use RTKLIB but I’ve some difficulties. I don’t now if you have time to support me but I’m trying RTKNAVI to yeld a kinematic solution starting from two mountpoints belonging to FReDNet. The experiment involves:
Rover taken from the FReDNet ntrip caster (RTCM 2.3)
Base Station taken from the FReDNet ntrip caster (RTCM 2.3)
Correction: real time orbits (GPS+GLONASS) coming from trip server at products.igs-ip.net mount point RTCM3EPH
Settings1
a) Positioning Mode: Kinematic
b) Ionosphere Correction: Iono-Free LC
c) Troposphere Correction: Saastamoinen
b) Frequency: L1+L2
c) Satellite Ephemeris/ Clock : broadcast
remaining options are more or less set to default values.
As I start the solution it guest to the “Single” status with red color, but after
a it turns into a grey color.
Looking at the Error/Warning tab I got:
point pos error (lack of valid sats ns=0)
I’ve also checked:
Streams: all of the cited streams (Rover, Master and Ephemeris are streaming down data
Nav GPS: the status is always and for every sat Unknown (the symbol - is used for that)
Obs data: the Trcv (GPST) is strangely 1994/08/25
RTCM Msgs for Rover and For Master are wrong: 1994/08/25. The one for the ephemeris is correct 2014/04/11
Can you help me? Thanks in advance.
David
The text was updated successfully, but these errors were encountered:
Dear all
I’m the manager of FReDNet that is a permanent GNNS receivers network located in Friuli (N-E of Italy).
I’ve just started to use RTKLIB but I’ve some difficulties. I don’t now if you have time to support me but I’m trying RTKNAVI to yeld a kinematic solution starting from two mountpoints belonging to FReDNet. The experiment involves:
Settings1
a) Positioning Mode: Kinematic
b) Ionosphere Correction: Iono-Free LC
c) Troposphere Correction: Saastamoinen
b) Frequency: L1+L2
c) Satellite Ephemeris/ Clock : broadcast
remaining options are more or less set to default values.
As I start the solution it guest to the “Single” status with red color, but after
a it turns into a grey color.
Looking at the Error/Warning tab I got:
point pos error (lack of valid sats ns=0)
I’ve also checked:
Can you help me? Thanks in advance.
David
The text was updated successfully, but these errors were encountered: