ASoC: Add support for synopsys i2s controller as per ASoC framework.

This patch add support for synopsys I2S controller as per the ASoC
framework.

Signed-off-by: Rajeev Kumar <rajeev-dlh.kumar@st.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

include/sound/designware_i2s.h

@@ -0,0 +1,69 @@
+/*
+ * Copyright (ST) 2012 Rajeev Kumar (rajeev-dlh.kumar@st.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __SOUND_DESIGNWARE_I2S_H
+#define __SOUND_DESIGNWARE_I2S_H
+
+#include <linux/dmaengine.h>
+#include <linux/types.h>
+
+/*
+ * struct i2s_clk_config_data - represent i2s clk configuration data
+ * @chan_nr: number of channel
+ * @data_width: number of bits per sample (8/16/24/32 bit)
+ * @sample_rate: sampling frequency (8Khz, 16Khz, 32Khz, 44Khz, 48Khz)
+ */
+struct i2s_clk_config_data {
+	int chan_nr;
+	u32 data_width;
+	u32 sample_rate;
+};
+
+struct i2s_platform_data {
+	#define DWC_I2S_PLAY	(1 << 0)
+	#define DWC_I2S_RECORD	(1 << 1)
+	unsigned int cap;
+	int channel;
+	u32 snd_fmts;
+	u32 snd_rates;
+
+	void *play_dma_data;
+	void *capture_dma_data;
+	bool (*filter)(struct dma_chan *chan, void *slave);
+	int (*i2s_clk_cfg)(struct i2s_clk_config_data *config);
+};
+
+struct i2s_dma_data {
+	void *data;
+	dma_addr_t addr;
+	u32 max_burst;
+	enum dma_slave_buswidth addr_width;
+	bool (*filter)(struct dma_chan *chan, void *slave);
+};
+
+/* I2S DMA registers */
+#define I2S_RXDMA		0x01C0
+#define I2S_TXDMA		0x01C8
+
+#define TWO_CHANNEL_SUPPORT	2	/* up to 2.0 */
+#define FOUR_CHANNEL_SUPPORT	4	/* up to 3.1 */
+#define SIX_CHANNEL_SUPPORT	6	/* up to 5.1 */
+#define EIGHT_CHANNEL_SUPPORT	8	/* up to 7.1 */
+
+#endif /*  __SOUND_DESIGNWARE_I2S_H */

sound/soc/Kconfig

@@ -33,6 +33,7 @@ source "sound/soc/atmel/Kconfig"
 source "sound/soc/au1x/Kconfig"
 source "sound/soc/blackfin/Kconfig"
 source "sound/soc/davinci/Kconfig"
+source "sound/soc/dwc/Kconfig"
 source "sound/soc/ep93xx/Kconfig"
 source "sound/soc/fsl/Kconfig"
 source "sound/soc/jz4740/Kconfig"

sound/soc/Makefile

@@ -11,6 +11,7 @@ obj-$(CONFIG_SND_SOC)	+= atmel/
 obj-$(CONFIG_SND_SOC)	+= au1x/
 obj-$(CONFIG_SND_SOC)	+= blackfin/
 obj-$(CONFIG_SND_SOC)	+= davinci/
+obj-$(CONFIG_SND_SOC)	+= dwc/
 obj-$(CONFIG_SND_SOC)	+= ep93xx/
 obj-$(CONFIG_SND_SOC)	+= fsl/
 obj-$(CONFIG_SND_SOC)	+= jz4740/

sound/soc/dwc/Kconfig

@@ -0,0 +1,8 @@
+config SND_DESIGNWARE_I2S
+	tristate "Synopsys I2S Device Driver"
+	help
+	 Say Y or M if you want to add support for I2S driver for
+	 Synopsys desigwnware I2S device. The device supports upto
+	 maximum of 8 channels each for play and record.
+
+

sound/soc/dwc/Makefile

@@ -0,0 +1,3 @@
+# SYNOPSYS Platform Support
+obj-$(CONFIG_SND_DESIGNWARE_I2S) += designware_i2s.o
+