various fixes

*Added fan speed to nvidia SMI report
*Added parameter checking to minimize errors
*Added prospector miner for AMD
*Changed .Bat and .txt files codification to ANSI
*Log folder automatic clean
*Restricted dual mining with high dcri to NVIDIA, created new profiles with low dcri for AMD
*Due to api fails, Yiimp is disabled for Whattomine virtual Pool
*Now Whattomine virtual pool shows wallets info
*Fixed: gatelessgate for AMD not working
*Fixed: Ethminer for AMD not working
*Fixed partial: memory usage extremely high, dont let profit screen selected to avoid memory waste

THIS VERSION CHANGE ALL POOL AND MINER FILES

Mayor changes

*Added Automatic24h mode, in this mode statistics are based on pools/WTM reported 24h statistics, not in current statistics as Automatic mode. Not all pool has this option.
*Redesigned interactive main screen (remember set focus on window to keys response)
*Added Nvidia SMI Info
*Added Pools Wallets info
*Automatic detection of miner open but no mining speed
*ccminer Klaust upgrade to 8.12, new assigned algos: Myriad-groestl, keccak
*Now hashrate speed only is recorded on bechmark, this can avoid extremely high hashrates
*No miners included in release, all miners all downloaded
*Configurable bechmark time on config.txt
*Configurable start screen on config.txt
*Fixed: Zpool high profit for Quark,Qubit, x11
*Fixed: Pools not restoring normal situation after api fail
*Fixed: Claymore120 miner error due to Blake2s algo
*Fixed: reduced memory consum
*Fixed: Nicehash workername not shown

Bugs Fixed

*Added EthMiner for AMD
*Added Sgminer for Skein for AMD
*Added 3 retries to yiimp api connection to minimize errors.

*Fixed: lyra2RE not working at Nicehash
*Fixed: file wrapper error
*Fixed (I hope): MM open new miner not closing old one

Welcome Nicehash!!!

*Added New Pool Nicehash for manual and auto mode
*Added GatelessGate for AMD (thxs to Imaminer)
*Removed some duplicated algos
*Moved HMQ1725 from ccminer tpruvot to ccminer 2.2 (slower but a lot of reject less)
*Fixed: Dual mining problems
*Fixed: screen resize error
*Fixed: benchmark not ending for AMD plattform

-------NO COMPILATION NEEDED, SOURCECODE IS ALL YOU NEED------------

Welcome Whattomine!!!

*New "Virtual" Pool Whattomine, based in whattomine statistics, it use MPH,Yiimp and Suprnova servers to mine most profitable coin, you must configure wallets on config.cfg and also have an account on Suprnova to use. See supported coins on readme.md file
*Now if miner screen is closed (manually or error) MM don´t need to wait interval defined time, in less than 15 sec it will detect error and continue execution
*Benchmark auto-interval, MM automatic set interval to 200 seconds for benchmarks, other executions are based on config.txt defined interval
*Added info on main screen of time left to next interval and local currency conversion, removed BTC/GH/day
*New ccminer tpruvot 2.2 (added algos in which it is fastest)--> recomended delete al tpruvot files on stat folder if you are copying from old version
*Removed ccminerpalginskunk, new tpruvot is faster on skunk algo
*Removed ccminerdjm, yescript no profitable
*All ccminer has now 4 retry times on fail
*Now hashrate shown 95% of maximum speed miner has reached anytime (benchmarking or running)
*Zpool will not show coin mined info, reason: not real info, pool choose a coin for each algo and not always is same as your hashrate more profitable
*Removed sgminer-skein
*Deleted skein algo for sgminer
*Changed X13 algo from ccminer-2.2 to faster ccminer-alexis
*Removed unused source code
*Main screen autoresize
*Due to technical problems removed dual mining from manual for suprnova (you can get same on new pool WTM filtering by parameter algorithm on core launch)
*Added to sprnova manual: SIBCOIN (SIB), UBIQ (UBQ), EXPANSE (EXP)
*Now is possible mine on manual mode on MPH
*Fixed: HashRefinery not working on 2.1 release

THIS VERSION CHANGE CONFIG FILES STRUCTURES (CONFIG.txt and some POOLS)
RECOMENDED CLEAN INSTALATION AND RUNNING BENCHMARKS AGAIN

-------NO COMPILATION NEEDED, SOURCECODE IS ALL YOU NEED------------

Fixes and WTM info

*Added info from Whattomine (profit) in manual mode menus, only for Whattomine available coins....
*Added Digibyte-groestl (DGB) to Suprnova
*Best menu load speed in manual mode with api info enabled
*Now miners with cero hashrate are shown on screen (it allows see bad benchmarks)
*Mayor changes on sgminer miner file
*Added stat option on password for allow statistics to Zpool,Yiimp and HR
*All ccminer has now 10sec error retry time (30sec before)
*Added ZecMiner for equihash on AMD platform

*Fixed: Deleted tribus algo from ccminer tpruvot miner file
*Fixed: Zpool API is returning bad data (too high profit) for X11 coin Hiro, this makes always select X11 algo
*Fixed: X17 Algo (Verge) not working
*Fixed: decred on manual mode not working on Suprnova
*Fixed: Algorithm parameter filter not working

Fix

*Fixed: Sometimes incorrect location choosed

Fix

*Fixed: Zpool login is wrong but no error received
*Fixed: MM download all software, not only type on config.txt

MAYOR CHANGES

*Included Miners for AMD platform, I haven´t AMD card, not tested. ¡¡¡ AMD TESTERS NEEDED !!!
*Automatic dual mining between pools (ex. Eth on MPH and lbry on Zpool), choosing more profitable pool for each coin
*Yiimp now support automatic profit based coin change, this pool has autoexchange off, you must set individual coins wallet on config.txt to mine
*Manual mining now choose best benchmarked software for each algo.
*New Miners files format, no more ".ps1" files only ".json" files. Easier to configure.
*Changed default interval to 200 seconds for acurate benchmarks
*Automatic profit files deletion on start
*Pools Multiselection allowed on menus and autoexecution batchs
*Added API integration with Yiimp and suprnova for manual mining (optional on config.txt)
*Donation (optional) now applies on manual pools too
*Removed duplicities between config files (deleted coins.json and algorithms.json)
*Removed Whattomine info
*Removed CCMINER-Skunk
*Added CCMINER-SkunkKrnlx
*Fixed: MPH always choose US Location.

THIS VERSION CHANGE ALL CONFIG FILES STRUCTURES (CONFIG,POOLS, MINERS, etc)

-------NO COMPILATION NEEDED, SOURCECODE IS ALL YOU NEED------------

New Pool YIIMP

*Added spreadminer for spreadcoin
*Upgrade screen instructions of use for each pool
*Added to Suprnova: SPREADCOIN (SPR)
*Added Yiimp pool (requires individual wallet for each coin in config.txt): DENARIUS (DNR), DECRED (DCR), SIGNATUM (SIGT), BITCORE (BTX), VERGE (VRG), SIBCOIN (SIB), VERTCOIN(VRC)
*Software donwload for first execution is now independent of selected pool

THIS VERSION REQUIRES NEW CONFIG.TXT FILE, YOU MUST DOWNLOAD AND CONFIGURE AGAIN!!!

-------NO COMPILATION NEEDED, SOURCECODE IS ALL YOU NEED------------