.. sectionauthor:: Marcel Ziswiler <marcel.ziswiler@toradex.com>
- SoM: https://www.toradex.com/computer-on-modules/verdin-arm-family/nxp-imx-8m-mini-nano
- Carrier board: https://www.toradex.com/products/carrier-board/verdin-development-board-kit
- Build the ARM trusted firmware binary
- Get the DDR firmware
- Build U-Boot
- Flash to eMMC
- Boot
$ echo "Downloading and building TF-A..."
$ git clone https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git
$ cd trusted-firmware-a
Then build ATF (TF-A):
$ export CROSS_COMPILE=aarch64-linux-gnu-
$ make PLAT=imx8mm IMX_BOOT_UART_BASE=0x30860000 bl31
$ cp build/imx8mm/release/bl31.bin ../
$ cd ..
$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.10.1.bin
$ chmod +x firmware-imx-8.10.1.bin
$ ./firmware-imx-8.10.1.bin
$ cp firmware-imx-8.10.1/firmware/ddr/synopsys/lpddr4*.bin ./
$ export CROSS_COMPILE=aarch64-linux-gnu-
$ make verdin-imx8mm_defconfig
$ make
> tftpboot ${loadaddr} flash.bin
> setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt ${blkcnt} / 0x200
> mmc dev 0 1 && mmc write ${loadaddr} 0x2 ${blkcnt}
As a convenience, instead of the last two commands, one may also use the update U-Boot wrapper:
> run update_uboot
ATF, U-Boot proper and u-boot.dtb images are packed into a FIT image, which is loaded and parsed by SPL.
Boot sequence is:
- SPL ---> ATF (TF-A) ---> U-Boot proper
Output:
U-Boot SPL 2021.10-rc2-00028-gee010ba1129 (Aug 23 2021 - 16:56:02 +0200) Normal Boot WDT: Started with servicing (60s timeout) Trying to boot from MMC1 NOTICE: BL31: v2.2(release):rel_imx_5.4.70_2.3.2_rc1-5-g835a8f67b NOTICE: BL31: Built : 18:02:12, Aug 16 2021 U-Boot 2021.10-rc2-00028-gee010ba1129 (Aug 23 2021 - 16:56:02 +0200) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz Reset cause: POR DRAM: 2 GiB WDT: Started with servicing (60s timeout) MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial Out: serial Err: serial Model: Toradex Verdin iMX8M Mini Quad 2GB Wi-Fi / BT IT V1.1A, Serial# 06760554 Carrier: Toradex Verdin Development Board V1.1A, Serial# 10754333 Setting variant to wifi Net: eth0: ethernet@30be0000 Hit any key to stop autoboot: 0 Verdin iMX8MM #