This document describes the information about Renesas supported boards and their usage steps.
Renesas is a SoC solutions provider for automotive and industrial applications.
Supported Renesas SoC based boards| Family | Board | SoC | Arch | defconfig |
|---|---|---|---|---|
| R2D | R2D-PLUS | SH7751 | sh | r2dplus_defconfig |
| RZ/A1 | GR-PEACH | R7S72100 (RZ/A1H) | arm | grpeach_defconfig |
| R-Car Gen2 | Lager | R8A7790 (H2) | arm | lager_defconfig |
| Stout | R8A7790 (H2) | arm | stout_defconfig | |
| Koelsch | R8A7791 (M2-W) | arm | koelsch_defconfig | |
| Porter | R8A7791 (M2-W) | arm | porter_defconfig | |
| Blanche | R8A7792 (V2H) | arm | blanche_defconfig | |
| Gose | R8A7793 (M2-N) | arm | gose_defconfig | |
| Alt | R8A7794 (E2) | arm | alt_defconfig | |
| Silk | R8A7794 (E2) | arm | silk_defconfig | |
| R-Car Gen3 | Salvator-X(S) | R8A77951 (H3) | arm64 | rcar3_salvator-x_defconfig |
| ULCB | R8A77951 (H3) | arm64 | rcar3_ulcb_defconfig | |
| Salvator-X(S) | R8A77960 (M3-W) | arm64 | rcar3_salvator-x_defconfig | |
| ULCB | R8A77960 (M3-W) | arm64 | rcar3_ulcb_defconfig | |
| Salvator-X(S) | R8A77965 (M3-N) | arm64 | rcar3_salvator-x_defconfig | |
| ULCB | R8A77965 (M3-N) | arm64 | rcar3_ulcb_defconfig | |
| Eagle | R8A77970 (V3M) | arm64 | r8a77970_eagle_defconfig | |
| V3MSK | R8A77970 (V3M) | arm64 | r8a77970_v3msk_defconfig | |
| Condor | R8A77980 (V3H) | arm64 | r8a77980_condor_defconfig | |
| V3HSK | R8A77980 (V3H) | arm64 | r8a77980_v3hsk_defconfig | |
| Ebisu | R8A77990 (E3) | arm64 | r8a77990_ebisu_defconfig | |
| Draak | R8A77995 (D3) | arm64 | r8a77995_draak_defconfig | |
| R-Car Gen4 | Falcon | R8A779A0 (V3U) | arm64 | r8a779a0_falcon_defconfig |
| Spider | R8A779F0 (S4) | arm64 | r8a779f0_spider_defconfig | |
| White Hawk | R8A779G0 (V4H) | arm64 | r8a779g0_whitehawk_defconfig | |
| RZ/G2 Family | Beacon EmbeddedWorks RZ/G2M SoM | R8A774A1 (RZ/G2M) | arm64 | rzg2_beacon_defconfig |
| HopeRun HiHope RZ/G2M | R8A774A1 (RZ/G2M) | arm64 | hihope_rzg2_defconfig | |
| Beacon EmbeddedWorks RZ/G2N SoM | R8A774B1 (RZ/G2N) | arm64 | rzg2_beacon_defconfig | |
| HopeRun HiHope RZ/G2N | R8A774B1 (RZ/G2N) | arm64 | hihope_rzg2_defconfig | |
| Silicon Linux RZ/G2E evaluation kit (EK874) | R8A774C0 (RZ/G2E) | arm64 | silinux_ek874_defconfig | |
| Beacon EmbeddedWorks RZ/G2H SoM | R8A774E1 (RZ/G2H) | arm64 | rzg2_beacon_defconfig | |
| HopeRun HiHope RZ/G2H | R8A774E1 (RZ/G2H) | arm64 | hihope_rzg2_defconfig | |
| :doc:`RZ/N1 Family <rzn1>` | Schneider RZ/N1D board | R9A06G032 (RZ/N1D) | arm64 | rzn1_snarc_defconfig |
| Schneider RZ/N1S board | R9A06G033 (RZ/N1S) | arm64 | rzn1_snarc_defconfig |
Locate the appropriate defconfig in the table above. Then apply standard build procedure:
make <board_defconfig> make