-
Notifications
You must be signed in to change notification settings - Fork 50
/
nante-wan.conf
87 lines (62 loc) · 2.35 KB
/
nante-wan.conf
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
# Nante-WAN config file
### General Setting
[general]
# @dmvpn_addr: IP address of DMVPN interface
dmvpn_addr = 10.0.0.10
### Config Fetcher Configuration
[config_fetch]
# @timeout: timeout for fetching config files (sec)
# @interval: interval for regular config file fetch (sec)
# @failed_interval: interval when config fetch fails (sec)
timeout = 5
interval = 3600
failed_interval = 5
### Routing Container Configuration
[routing]
# @wan_interface: name of interface which is connected to uplink
# @vpn_interface: name of DMVPN interface
wan_interface = eth0
dmvpn_interface = gre1
# @nhs_nbma_addr\d+: Nexthop Server's IP address on the DMVPN overlay.
# NHS addr is resolved by 'dynamic'
nhs_nbma_addr1 = 192.168.0.10
nhs_nbma_addr2 = 192.168.0.11
# @as_number: AS number used in iBGP configuration for EVPN.
# @rr_addr\d+: BGP Route Reflector address which this host connect to.
# @bgp_password: BGP password (optional)
as_number = 65000
rr_addr1 = 10.0.0.100
rr_addr2 = 10.0.0.101
bgp_password = bgp_password
# @ipsec_secret: IPsec shared secret.
ipsec_secret = hogehogemogamoga
# @gre_key: GRE key field value
# @gre_ttl: TTL of GRE encapsulated packets
gre_key = 1
gre_ttl = 64
# @bgp_range: Prefix where BGP connections come from (for Route Server)
bgp_range = 10.0.0.0/16
### Port Config Container Configuration
[portconfig]
# @br_interface: bridge interface name to be configured
# @json_url_prefix: Prefix for config file URL. URL is PREFIX/[dmvpn_addr].json
br_interface = bridge
json_url_prefix = http://10.0.0.100/portconfig
# @bind_port: Port number of portconfig REST API for update trigger
# @bind_addr: IP Address of REST API for update trigger. default dmvpn_addr
bind_port = 8080
#bind_addr = 10.0.0.10
# @json_config: port config json config file (for test)
#json_config = /tmp/portconfig-test.json
### ebtables-based ACL Configuration
[ebconfig]
# @br_interface: bridge interface name to be configured
# @json_url_prefix: Prefix for config file URL. URL is PREFIX/[dmvpn_addr].json
br_interface = bridge
json_url_prefix = http://10.0.0.0/ebconfig
# @bind_port: Port number for portconfig REST API for trigger update
# @bind_addr: address for REST API for trigger update. default dmvpn_addr
bind_port = 8081
bind_addr = 10.0.0.10
# @json_config: port config json config file (for test)
#json_config = /tmp/ebconfig-test.json