zz_lbtargetgroup_types.go

// SPDX-FileCopyrightText: 2024 The Crossplane Authors <https://crossplane.io>
//
// SPDX-License-Identifier: Apache-2.0

// Code generated by upjet. DO NOT EDIT.

package v1beta1

import (
	metav1 "k8s.io/apimachinery/pkg/apis/meta/v1"
	"k8s.io/apimachinery/pkg/runtime/schema"

	v1 "github.com/crossplane/crossplane-runtime/apis/common/v1"
)

type HealthCheckInitParameters struct {

	// Whether health checks are enabled. Defaults to true.
	Enabled *bool `json:"enabled,omitempty" tf:"enabled,omitempty"`

	// Number of consecutive health check successes required before considering a target healthy. The range is 2-10. Defaults to 3.
	HealthyThreshold *float64 `json:"healthyThreshold,omitempty" tf:"healthy_threshold,omitempty"`

	// Approximate amount of time, in seconds, between health checks of an individual target. The range is 5-300. For lambda target groups, it needs to be greater than the timeout of the underlying lambda. Defaults to 30.
	Interval *float64 `json:"interval,omitempty" tf:"interval,omitempty"`

	// separated individual values (e.g., "200,202") or a range of values (e.g., "200-299").
	Matcher *string `json:"matcher,omitempty" tf:"matcher,omitempty"`

	// (May be required) Destination for the health check request. Required for HTTP/HTTPS ALB and HTTP NLB. Only applies to HTTP/HTTPS.
	Path *string `json:"path,omitempty" tf:"path,omitempty"`

	// The port the load balancer uses when performing health checks on targets.
	// Valid values are either traffic-port, to use the same port as the target group, or a valid port number between 1 and 65536.
	// Default is traffic-port.
	Port *string `json:"port,omitempty" tf:"port,omitempty"`

	// Protocol the load balancer uses when performing health checks on targets.
	// Must be one of TCP, HTTP, or HTTPS.
	// The TCP protocol is not supported for health checks if the protocol of the target group is HTTP or HTTPS.
	// Default is HTTP.
	// Cannot be specified when the target_type is lambda.
	Protocol *string `json:"protocol,omitempty" tf:"protocol,omitempty"`

	// Amount of time, in seconds, during which no response from a target means a failed health check. The range is 2–120 seconds. For target groups with a protocol of HTTP, the default is 6 seconds. For target groups with a protocol of TCP, TLS or HTTPS, the default is 10 seconds. For target groups with a protocol of GENEVE, the default is 5 seconds. If the target type is lambda, the default is 30 seconds.
	Timeout *float64 `json:"timeout,omitempty" tf:"timeout,omitempty"`

	// Number of consecutive health check failures required before considering a target unhealthy. The range is 2-10. Defaults to 3.
	UnhealthyThreshold *float64 `json:"unhealthyThreshold,omitempty" tf:"unhealthy_threshold,omitempty"`
}

type HealthCheckObservation struct {

	// Whether health checks are enabled. Defaults to true.
	Enabled *bool `json:"enabled,omitempty" tf:"enabled,omitempty"`

	// Number of consecutive health check successes required before considering a target healthy. The range is 2-10. Defaults to 3.
	HealthyThreshold *float64 `json:"healthyThreshold,omitempty" tf:"healthy_threshold,omitempty"`

	// Approximate amount of time, in seconds, between health checks of an individual target. The range is 5-300. For lambda target groups, it needs to be greater than the timeout of the underlying lambda. Defaults to 30.
	Interval *float64 `json:"interval,omitempty" tf:"interval,omitempty"`

	// separated individual values (e.g., "200,202") or a range of values (e.g., "200-299").
	Matcher *string `json:"matcher,omitempty" tf:"matcher,omitempty"`

	// (May be required) Destination for the health check request. Required for HTTP/HTTPS ALB and HTTP NLB. Only applies to HTTP/HTTPS.
	Path *string `json:"path,omitempty" tf:"path,omitempty"`

	// The port the load balancer uses when performing health checks on targets.
	// Valid values are either traffic-port, to use the same port as the target group, or a valid port number between 1 and 65536.
	// Default is traffic-port.
	Port *string `json:"port,omitempty" tf:"port,omitempty"`

	// Protocol the load balancer uses when performing health checks on targets.
	// Must be one of TCP, HTTP, or HTTPS.
	// The TCP protocol is not supported for health checks if the protocol of the target group is HTTP or HTTPS.
	// Default is HTTP.
	// Cannot be specified when the target_type is lambda.
	Protocol *string `json:"protocol,omitempty" tf:"protocol,omitempty"`

	// Amount of time, in seconds, during which no response from a target means a failed health check. The range is 2–120 seconds. For target groups with a protocol of HTTP, the default is 6 seconds. For target groups with a protocol of TCP, TLS or HTTPS, the default is 10 seconds. For target groups with a protocol of GENEVE, the default is 5 seconds. If the target type is lambda, the default is 30 seconds.
	Timeout *float64 `json:"timeout,omitempty" tf:"timeout,omitempty"`

	// Number of consecutive health check failures required before considering a target unhealthy. The range is 2-10. Defaults to 3.
	UnhealthyThreshold *float64 `json:"unhealthyThreshold,omitempty" tf:"unhealthy_threshold,omitempty"`
}

type HealthCheckParameters struct {

	// Whether health checks are enabled. Defaults to true.
	// +kubebuilder:validation:Optional
	Enabled *bool `json:"enabled,omitempty" tf:"enabled,omitempty"`

	// Number of consecutive health check successes required before considering a target healthy. The range is 2-10. Defaults to 3.
	// +kubebuilder:validation:Optional
	HealthyThreshold *float64 `json:"healthyThreshold,omitempty" tf:"healthy_threshold,omitempty"`

	// Approximate amount of time, in seconds, between health checks of an individual target. The range is 5-300. For lambda target groups, it needs to be greater than the timeout of the underlying lambda. Defaults to 30.
	// +kubebuilder:validation:Optional
	Interval *float64 `json:"interval,omitempty" tf:"interval,omitempty"`

	// separated individual values (e.g., "200,202") or a range of values (e.g., "200-299").
	// +kubebuilder:validation:Optional
	Matcher *string `json:"matcher,omitempty" tf:"matcher,omitempty"`

	// (May be required) Destination for the health check request. Required for HTTP/HTTPS ALB and HTTP NLB. Only applies to HTTP/HTTPS.
	// +kubebuilder:validation:Optional
	Path *string `json:"path,omitempty" tf:"path,omitempty"`

	// The port the load balancer uses when performing health checks on targets.
	// Valid values are either traffic-port, to use the same port as the target group, or a valid port number between 1 and 65536.
	// Default is traffic-port.
	// +kubebuilder:validation:Optional
	Port *string `json:"port,omitempty" tf:"port,omitempty"`

	// Protocol the load balancer uses when performing health checks on targets.
	// Must be one of TCP, HTTP, or HTTPS.
	// The TCP protocol is not supported for health checks if the protocol of the target group is HTTP or HTTPS.
	// Default is HTTP.
	// Cannot be specified when the target_type is lambda.
	// +kubebuilder:validation:Optional
	Protocol *string `json:"protocol,omitempty" tf:"protocol,omitempty"`

	// Amount of time, in seconds, during which no response from a target means a failed health check. The range is 2–120 seconds. For target groups with a protocol of HTTP, the default is 6 seconds. For target groups with a protocol of TCP, TLS or HTTPS, the default is 10 seconds. For target groups with a protocol of GENEVE, the default is 5 seconds. If the target type is lambda, the default is 30 seconds.
	// +kubebuilder:validation:Optional
	Timeout *float64 `json:"timeout,omitempty" tf:"timeout,omitempty"`

	// Number of consecutive health check failures required before considering a target unhealthy. The range is 2-10. Defaults to 3.
	// +kubebuilder:validation:Optional
	UnhealthyThreshold *float64 `json:"unhealthyThreshold,omitempty" tf:"unhealthy_threshold,omitempty"`
}

type LBTargetGroupInitParameters struct {

	// Whether to terminate connections at the end of the deregistration timeout on Network Load Balancers. See doc for more information. Default is false.
	ConnectionTermination *bool `json:"connectionTermination,omitempty" tf:"connection_termination,omitempty"`

	// Amount time for Elastic Load Balancing to wait before changing the state of a deregistering target from draining to unused. The range is 0-3600 seconds. The default value is 300 seconds.
	DeregistrationDelay *string `json:"deregistrationDelay,omitempty" tf:"deregistration_delay,omitempty"`

	// Health Check configuration block. Detailed below.
	HealthCheck []HealthCheckInitParameters `json:"healthCheck,omitempty" tf:"health_check,omitempty"`

	// The type of IP addresses used by the target group, only supported when target type is set to ip. Possible values are ipv4 or ipv6.
	IPAddressType *string `json:"ipAddressType,omitempty" tf:"ip_address_type,omitempty"`

	// Whether the request and response headers exchanged between the load balancer and the Lambda function include arrays of values or strings. Only applies when target_type is lambda. Default is false.
	LambdaMultiValueHeadersEnabled *bool `json:"lambdaMultiValueHeadersEnabled,omitempty" tf:"lambda_multi_value_headers_enabled,omitempty"`

	// Determines how the load balancer selects targets when routing requests. Only applicable for Application Load Balancer Target Groups. The value is round_robin or least_outstanding_requests. The default is round_robin.
	LoadBalancingAlgorithmType *string `json:"loadBalancingAlgorithmType,omitempty" tf:"load_balancing_algorithm_type,omitempty"`

	// Indicates whether cross zone load balancing is enabled. The value is "true", "false" or "use_load_balancer_configuration". The default is "use_load_balancer_configuration".
	LoadBalancingCrossZoneEnabled *string `json:"loadBalancingCrossZoneEnabled,omitempty" tf:"load_balancing_cross_zone_enabled,omitempty"`

	// Name of the target group. This name must be unique per region per account, can have a maximum of 32 characters, must contain only alphanumeric characters or hyphens, and must not begin or end with a hyphen.
	Name *string `json:"name,omitempty" tf:"name,omitempty"`

	// (May be required, Forces new resource) Port on which targets receive traffic, unless overridden when registering a specific target. Required when target_type is instance, ip or alb. Does not apply when target_type is lambda.
	Port *float64 `json:"port,omitempty" tf:"port,omitempty"`

	// Whether client IP preservation is enabled. See doc for more information.
	PreserveClientIP *string `json:"preserveClientIp,omitempty" tf:"preserve_client_ip,omitempty"`

	// (May be required, Forces new resource) Protocol to use for routing traffic to the targets.
	// Should be one of GENEVE, HTTP, HTTPS, TCP, TCP_UDP, TLS, or UDP.
	// Required when target_type is instance, ip, or alb.
	// Does not apply when target_type is lambda.
	Protocol *string `json:"protocol,omitempty" tf:"protocol,omitempty"`

	// Only applicable when protocol is HTTP or HTTPS. The protocol version. Specify GRPC to send requests to targets using gRPC. Specify HTTP2 to send requests to targets using HTTP/2. The default is HTTP1, which sends requests to targets using HTTP/1.1
	ProtocolVersion *string `json:"protocolVersion,omitempty" tf:"protocol_version,omitempty"`

	// Whether to enable support for proxy protocol v2 on Network Load Balancers. See doc for more information. Default is false.
	ProxyProtocolV2 *bool `json:"proxyProtocolV2,omitempty" tf:"proxy_protocol_v2,omitempty"`

	// Amount time for targets to warm up before the load balancer sends them a full share of requests. The range is 30-900 seconds or 0 to disable. The default value is 0 seconds.
	SlowStart *float64 `json:"slowStart,omitempty" tf:"slow_start,omitempty"`

	// Stickiness configuration block. Detailed below.
	Stickiness []LBTargetGroupStickinessInitParameters `json:"stickiness,omitempty" tf:"stickiness,omitempty"`

	// Key-value map of resource tags.
	// +mapType=granular
	Tags map[string]*string `json:"tags,omitempty" tf:"tags,omitempty"`

	// Target failover block. Only applicable for Gateway Load Balancer target groups. See target_failover for more information.
	TargetFailover []TargetFailoverInitParameters `json:"targetFailover,omitempty" tf:"target_failover,omitempty"`

	// Target health state block. Only applicable for Network Load Balancer target groups when protocol is TCP or TLS. See target_health_state for more information.
	TargetHealthState []TargetHealthStateInitParameters `json:"targetHealthState,omitempty" tf:"target_health_state,omitempty"`

	// Type of target that you must specify when registering targets with this target group.
	// See doc for supported values.
	// The default is instance.
	TargetType *string `json:"targetType,omitempty" tf:"target_type,omitempty"`

	// Identifier of the VPC in which to create the target group. Required when target_type is instance, ip or alb. Does not apply when target_type is lambda.
	// +crossplane:generate:reference:type=github.com/upbound/provider-aws/apis/ec2/v1beta1.VPC
	VPCID *string `json:"vpcId,omitempty" tf:"vpc_id,omitempty"`

	// Reference to a VPC in ec2 to populate vpcId.
	// +kubebuilder:validation:Optional
	VPCIDRef *v1.Reference `json:"vpcIdRef,omitempty" tf:"-"`

	// Selector for a VPC in ec2 to populate vpcId.
	// +kubebuilder:validation:Optional
	VPCIDSelector *v1.Selector `json:"vpcIdSelector,omitempty" tf:"-"`
}

type LBTargetGroupObservation struct {

	// ARN of the Target Group (matches id).
	Arn *string `json:"arn,omitempty" tf:"arn,omitempty"`

	// ARN suffix for use with CloudWatch Metrics.
	ArnSuffix *string `json:"arnSuffix,omitempty" tf:"arn_suffix,omitempty"`

	// Whether to terminate connections at the end of the deregistration timeout on Network Load Balancers. See doc for more information. Default is false.
	ConnectionTermination *bool `json:"connectionTermination,omitempty" tf:"connection_termination,omitempty"`

	// Amount time for Elastic Load Balancing to wait before changing the state of a deregistering target from draining to unused. The range is 0-3600 seconds. The default value is 300 seconds.
	DeregistrationDelay *string `json:"deregistrationDelay,omitempty" tf:"deregistration_delay,omitempty"`

	// Health Check configuration block. Detailed below.
	HealthCheck []HealthCheckObservation `json:"healthCheck,omitempty" tf:"health_check,omitempty"`

	// ARN of the Target Group (matches arn).
	ID *string `json:"id,omitempty" tf:"id,omitempty"`

	// The type of IP addresses used by the target group, only supported when target type is set to ip. Possible values are ipv4 or ipv6.
	IPAddressType *string `json:"ipAddressType,omitempty" tf:"ip_address_type,omitempty"`

	// Whether the request and response headers exchanged between the load balancer and the Lambda function include arrays of values or strings. Only applies when target_type is lambda. Default is false.
	LambdaMultiValueHeadersEnabled *bool `json:"lambdaMultiValueHeadersEnabled,omitempty" tf:"lambda_multi_value_headers_enabled,omitempty"`

	// Determines how the load balancer selects targets when routing requests. Only applicable for Application Load Balancer Target Groups. The value is round_robin or least_outstanding_requests. The default is round_robin.
	LoadBalancingAlgorithmType *string `json:"loadBalancingAlgorithmType,omitempty" tf:"load_balancing_algorithm_type,omitempty"`

	// Indicates whether cross zone load balancing is enabled. The value is "true", "false" or "use_load_balancer_configuration". The default is "use_load_balancer_configuration".
	LoadBalancingCrossZoneEnabled *string `json:"loadBalancingCrossZoneEnabled,omitempty" tf:"load_balancing_cross_zone_enabled,omitempty"`

	// Name of the target group. This name must be unique per region per account, can have a maximum of 32 characters, must contain only alphanumeric characters or hyphens, and must not begin or end with a hyphen.
	Name *string `json:"name,omitempty" tf:"name,omitempty"`

	// (May be required, Forces new resource) Port on which targets receive traffic, unless overridden when registering a specific target. Required when target_type is instance, ip or alb. Does not apply when target_type is lambda.
	Port *float64 `json:"port,omitempty" tf:"port,omitempty"`

	// Whether client IP preservation is enabled. See doc for more information.
	PreserveClientIP *string `json:"preserveClientIp,omitempty" tf:"preserve_client_ip,omitempty"`

	// (May be required, Forces new resource) Protocol to use for routing traffic to the targets.
	// Should be one of GENEVE, HTTP, HTTPS, TCP, TCP_UDP, TLS, or UDP.
	// Required when target_type is instance, ip, or alb.
	// Does not apply when target_type is lambda.
	Protocol *string `json:"protocol,omitempty" tf:"protocol,omitempty"`

	// Only applicable when protocol is HTTP or HTTPS. The protocol version. Specify GRPC to send requests to targets using gRPC. Specify HTTP2 to send requests to targets using HTTP/2. The default is HTTP1, which sends requests to targets using HTTP/1.1
	ProtocolVersion *string `json:"protocolVersion,omitempty" tf:"protocol_version,omitempty"`

	// Whether to enable support for proxy protocol v2 on Network Load Balancers. See doc for more information. Default is false.
	ProxyProtocolV2 *bool `json:"proxyProtocolV2,omitempty" tf:"proxy_protocol_v2,omitempty"`

	// Amount time for targets to warm up before the load balancer sends them a full share of requests. The range is 30-900 seconds or 0 to disable. The default value is 0 seconds.
	SlowStart *float64 `json:"slowStart,omitempty" tf:"slow_start,omitempty"`

	// Stickiness configuration block. Detailed below.
	Stickiness []LBTargetGroupStickinessObservation `json:"stickiness,omitempty" tf:"stickiness,omitempty"`

	// Key-value map of resource tags.
	// +mapType=granular
	Tags map[string]*string `json:"tags,omitempty" tf:"tags,omitempty"`

	// A map of tags assigned to the resource, including those inherited from the provider default_tags configuration block.
	// +mapType=granular
	TagsAll map[string]*string `json:"tagsAll,omitempty" tf:"tags_all,omitempty"`

	// Target failover block. Only applicable for Gateway Load Balancer target groups. See target_failover for more information.
	TargetFailover []TargetFailoverObservation `json:"targetFailover,omitempty" tf:"target_failover,omitempty"`

	// Target health state block. Only applicable for Network Load Balancer target groups when protocol is TCP or TLS. See target_health_state for more information.
	TargetHealthState []TargetHealthStateObservation `json:"targetHealthState,omitempty" tf:"target_health_state,omitempty"`

	// Type of target that you must specify when registering targets with this target group.
	// See doc for supported values.
	// The default is instance.
	TargetType *string `json:"targetType,omitempty" tf:"target_type,omitempty"`

	// Identifier of the VPC in which to create the target group. Required when target_type is instance, ip or alb. Does not apply when target_type is lambda.
	VPCID *string `json:"vpcId,omitempty" tf:"vpc_id,omitempty"`
}

type LBTargetGroupParameters struct {

	// Whether to terminate connections at the end of the deregistration timeout on Network Load Balancers. See doc for more information. Default is false.
	// +kubebuilder:validation:Optional
	ConnectionTermination *bool `json:"connectionTermination,omitempty" tf:"connection_termination,omitempty"`

	// Amount time for Elastic Load Balancing to wait before changing the state of a deregistering target from draining to unused. The range is 0-3600 seconds. The default value is 300 seconds.
	// +kubebuilder:validation:Optional
	DeregistrationDelay *string `json:"deregistrationDelay,omitempty" tf:"deregistration_delay,omitempty"`

	// Health Check configuration block. Detailed below.
	// +kubebuilder:validation:Optional
	HealthCheck []HealthCheckParameters `json:"healthCheck,omitempty" tf:"health_check,omitempty"`

	// The type of IP addresses used by the target group, only supported when target type is set to ip. Possible values are ipv4 or ipv6.
	// +kubebuilder:validation:Optional
	IPAddressType *string `json:"ipAddressType,omitempty" tf:"ip_address_type,omitempty"`

	// Whether the request and response headers exchanged between the load balancer and the Lambda function include arrays of values or strings. Only applies when target_type is lambda. Default is false.
	// +kubebuilder:validation:Optional
	LambdaMultiValueHeadersEnabled *bool `json:"lambdaMultiValueHeadersEnabled,omitempty" tf:"lambda_multi_value_headers_enabled,omitempty"`

	// Determines how the load balancer selects targets when routing requests. Only applicable for Application Load Balancer Target Groups. The value is round_robin or least_outstanding_requests. The default is round_robin.
	// +kubebuilder:validation:Optional
	LoadBalancingAlgorithmType *string `json:"loadBalancingAlgorithmType,omitempty" tf:"load_balancing_algorithm_type,omitempty"`

	// Indicates whether cross zone load balancing is enabled. The value is "true", "false" or "use_load_balancer_configuration". The default is "use_load_balancer_configuration".
	// +kubebuilder:validation:Optional
	LoadBalancingCrossZoneEnabled *string `json:"loadBalancingCrossZoneEnabled,omitempty" tf:"load_balancing_cross_zone_enabled,omitempty"`

	// Name of the target group. This name must be unique per region per account, can have a maximum of 32 characters, must contain only alphanumeric characters or hyphens, and must not begin or end with a hyphen.
	// +kubebuilder:validation:Optional
	Name *string `json:"name,omitempty" tf:"name,omitempty"`

	// (May be required, Forces new resource) Port on which targets receive traffic, unless overridden when registering a specific target. Required when target_type is instance, ip or alb. Does not apply when target_type is lambda.
	// +kubebuilder:validation:Optional
	Port *float64 `json:"port,omitempty" tf:"port,omitempty"`

	// Whether client IP preservation is enabled. See doc for more information.
	// +kubebuilder:validation:Optional
	PreserveClientIP *string `json:"preserveClientIp,omitempty" tf:"preserve_client_ip,omitempty"`

	// (May be required, Forces new resource) Protocol to use for routing traffic to the targets.
	// Should be one of GENEVE, HTTP, HTTPS, TCP, TCP_UDP, TLS, or UDP.
	// Required when target_type is instance, ip, or alb.
	// Does not apply when target_type is lambda.
	// +kubebuilder:validation:Optional
	Protocol *string `json:"protocol,omitempty" tf:"protocol,omitempty"`

	// Only applicable when protocol is HTTP or HTTPS. The protocol version. Specify GRPC to send requests to targets using gRPC. Specify HTTP2 to send requests to targets using HTTP/2. The default is HTTP1, which sends requests to targets using HTTP/1.1
	// +kubebuilder:validation:Optional
	ProtocolVersion *string `json:"protocolVersion,omitempty" tf:"protocol_version,omitempty"`

	// Whether to enable support for proxy protocol v2 on Network Load Balancers. See doc for more information. Default is false.
	// +kubebuilder:validation:Optional
	ProxyProtocolV2 *bool `json:"proxyProtocolV2,omitempty" tf:"proxy_protocol_v2,omitempty"`

	// Region is the region you'd like your resource to be created in.
	// +upjet:crd:field:TFTag=-
	// +kubebuilder:validation:Required
	Region *string `json:"region" tf:"-"`

	// Amount time for targets to warm up before the load balancer sends them a full share of requests. The range is 30-900 seconds or 0 to disable. The default value is 0 seconds.
	// +kubebuilder:validation:Optional
	SlowStart *float64 `json:"slowStart,omitempty" tf:"slow_start,omitempty"`

	// Stickiness configuration block. Detailed below.
	// +kubebuilder:validation:Optional
	Stickiness []LBTargetGroupStickinessParameters `json:"stickiness,omitempty" tf:"stickiness,omitempty"`

	// Key-value map of resource tags.
	// +kubebuilder:validation:Optional
	// +mapType=granular
	Tags map[string]*string `json:"tags,omitempty" tf:"tags,omitempty"`

	// Target failover block. Only applicable for Gateway Load Balancer target groups. See target_failover for more information.
	// +kubebuilder:validation:Optional
	TargetFailover []TargetFailoverParameters `json:"targetFailover,omitempty" tf:"target_failover,omitempty"`

	// Target health state block. Only applicable for Network Load Balancer target groups when protocol is TCP or TLS. See target_health_state for more information.
	// +kubebuilder:validation:Optional
	TargetHealthState []TargetHealthStateParameters `json:"targetHealthState,omitempty" tf:"target_health_state,omitempty"`

	// Type of target that you must specify when registering targets with this target group.
	// See doc for supported values.
	// The default is instance.
	// +kubebuilder:validation:Optional
	TargetType *string `json:"targetType,omitempty" tf:"target_type,omitempty"`

	// Identifier of the VPC in which to create the target group. Required when target_type is instance, ip or alb. Does not apply when target_type is lambda.
	// +crossplane:generate:reference:type=github.com/upbound/provider-aws/apis/ec2/v1beta1.VPC
	// +kubebuilder:validation:Optional
	VPCID *string `json:"vpcId,omitempty" tf:"vpc_id,omitempty"`

	// Reference to a VPC in ec2 to populate vpcId.
	// +kubebuilder:validation:Optional
	VPCIDRef *v1.Reference `json:"vpcIdRef,omitempty" tf:"-"`

	// Selector for a VPC in ec2 to populate vpcId.
	// +kubebuilder:validation:Optional
	VPCIDSelector *v1.Selector `json:"vpcIdSelector,omitempty" tf:"-"`
}

type LBTargetGroupStickinessInitParameters struct {

	// Only used when the type is lb_cookie. The time period, in seconds, during which requests from a client should be routed to the same target. After this time period expires, the load balancer-generated cookie is considered stale. The range is 1 second to 1 week (604800 seconds). The default value is 1 day (86400 seconds).
	CookieDuration *float64 `json:"cookieDuration,omitempty" tf:"cookie_duration,omitempty"`

	// Name of the application based cookie. AWSALB, AWSALBAPP, and AWSALBTG prefixes are reserved and cannot be used. Only needed when type is app_cookie.
	CookieName *string `json:"cookieName,omitempty" tf:"cookie_name,omitempty"`

	// Whether health checks are enabled. Defaults to true.
	Enabled *bool `json:"enabled,omitempty" tf:"enabled,omitempty"`

	// The type of sticky sessions. The only current possible values are lb_cookie, app_cookie for ALBs, source_ip for NLBs, and source_ip_dest_ip, source_ip_dest_ip_proto for GWLBs.
	Type *string `json:"type,omitempty" tf:"type,omitempty"`
}

type LBTargetGroupStickinessObservation struct {

	// Only used when the type is lb_cookie. The time period, in seconds, during which requests from a client should be routed to the same target. After this time period expires, the load balancer-generated cookie is considered stale. The range is 1 second to 1 week (604800 seconds). The default value is 1 day (86400 seconds).
	CookieDuration *float64 `json:"cookieDuration,omitempty" tf:"cookie_duration,omitempty"`

	// Name of the application based cookie. AWSALB, AWSALBAPP, and AWSALBTG prefixes are reserved and cannot be used. Only needed when type is app_cookie.
	CookieName *string `json:"cookieName,omitempty" tf:"cookie_name,omitempty"`

	// Whether health checks are enabled. Defaults to true.
	Enabled *bool `json:"enabled,omitempty" tf:"enabled,omitempty"`

	// The type of sticky sessions. The only current possible values are lb_cookie, app_cookie for ALBs, source_ip for NLBs, and source_ip_dest_ip, source_ip_dest_ip_proto for GWLBs.
	Type *string `json:"type,omitempty" tf:"type,omitempty"`
}

type LBTargetGroupStickinessParameters struct {

	// Only used when the type is lb_cookie. The time period, in seconds, during which requests from a client should be routed to the same target. After this time period expires, the load balancer-generated cookie is considered stale. The range is 1 second to 1 week (604800 seconds). The default value is 1 day (86400 seconds).
	// +kubebuilder:validation:Optional
	CookieDuration *float64 `json:"cookieDuration,omitempty" tf:"cookie_duration,omitempty"`

	// Name of the application based cookie. AWSALB, AWSALBAPP, and AWSALBTG prefixes are reserved and cannot be used. Only needed when type is app_cookie.
	// +kubebuilder:validation:Optional
	CookieName *string `json:"cookieName,omitempty" tf:"cookie_name,omitempty"`

	// Whether health checks are enabled. Defaults to true.
	// +kubebuilder:validation:Optional
	Enabled *bool `json:"enabled,omitempty" tf:"enabled,omitempty"`

	// The type of sticky sessions. The only current possible values are lb_cookie, app_cookie for ALBs, source_ip for NLBs, and source_ip_dest_ip, source_ip_dest_ip_proto for GWLBs.
	// +kubebuilder:validation:Optional
	Type *string `json:"type" tf:"type,omitempty"`
}

type TargetFailoverInitParameters struct {

	// Indicates how the GWLB handles existing flows when a target is deregistered. Possible values are rebalance and no_rebalance. Must match the attribute value set for on_unhealthy. Default: no_rebalance.
	OnDeregistration *string `json:"onDeregistration,omitempty" tf:"on_deregistration,omitempty"`

	// Indicates how the GWLB handles existing flows when a target is unhealthy. Possible values are rebalance and no_rebalance. Must match the attribute value set for on_deregistration. Default: no_rebalance.
	OnUnhealthy *string `json:"onUnhealthy,omitempty" tf:"on_unhealthy,omitempty"`
}

type TargetFailoverObservation struct {

	// Indicates how the GWLB handles existing flows when a target is deregistered. Possible values are rebalance and no_rebalance. Must match the attribute value set for on_unhealthy. Default: no_rebalance.
	OnDeregistration *string `json:"onDeregistration,omitempty" tf:"on_deregistration,omitempty"`

	// Indicates how the GWLB handles existing flows when a target is unhealthy. Possible values are rebalance and no_rebalance. Must match the attribute value set for on_deregistration. Default: no_rebalance.
	OnUnhealthy *string `json:"onUnhealthy,omitempty" tf:"on_unhealthy,omitempty"`
}

type TargetFailoverParameters struct {

	// Indicates how the GWLB handles existing flows when a target is deregistered. Possible values are rebalance and no_rebalance. Must match the attribute value set for on_unhealthy. Default: no_rebalance.
	// +kubebuilder:validation:Optional
	OnDeregistration *string `json:"onDeregistration" tf:"on_deregistration,omitempty"`

	// Indicates how the GWLB handles existing flows when a target is unhealthy. Possible values are rebalance and no_rebalance. Must match the attribute value set for on_deregistration. Default: no_rebalance.
	// +kubebuilder:validation:Optional
	OnUnhealthy *string `json:"onUnhealthy" tf:"on_unhealthy,omitempty"`
}

type TargetHealthStateInitParameters struct {

	// Indicates whether the load balancer terminates connections to unhealthy targets. Possible values are true or false. Default: true.
	EnableUnhealthyConnectionTermination *bool `json:"enableUnhealthyConnectionTermination,omitempty" tf:"enable_unhealthy_connection_termination,omitempty"`
}

type TargetHealthStateObservation struct {

	// Indicates whether the load balancer terminates connections to unhealthy targets. Possible values are true or false. Default: true.
	EnableUnhealthyConnectionTermination *bool `json:"enableUnhealthyConnectionTermination,omitempty" tf:"enable_unhealthy_connection_termination,omitempty"`
}

type TargetHealthStateParameters struct {

	// Indicates whether the load balancer terminates connections to unhealthy targets. Possible values are true or false. Default: true.
	// +kubebuilder:validation:Optional
	EnableUnhealthyConnectionTermination *bool `json:"enableUnhealthyConnectionTermination" tf:"enable_unhealthy_connection_termination,omitempty"`
}

// LBTargetGroupSpec defines the desired state of LBTargetGroup
type LBTargetGroupSpec struct {
	v1.ResourceSpec `json:",inline"`
	ForProvider     LBTargetGroupParameters `json:"forProvider"`
	// THIS IS A BETA FIELD. It will be honored
	// unless the Management Policies feature flag is disabled.
	// InitProvider holds the same fields as ForProvider, with the exception
	// of Identifier and other resource reference fields. The fields that are
	// in InitProvider are merged into ForProvider when the resource is created.
	// The same fields are also added to the terraform ignore_changes hook, to
	// avoid updating them after creation. This is useful for fields that are
	// required on creation, but we do not desire to update them after creation,
	// for example because of an external controller is managing them, like an
	// autoscaler.
	InitProvider LBTargetGroupInitParameters `json:"initProvider,omitempty"`
}

// LBTargetGroupStatus defines the observed state of LBTargetGroup.
type LBTargetGroupStatus struct {
	v1.ResourceStatus `json:",inline"`
	AtProvider        LBTargetGroupObservation `json:"atProvider,omitempty"`
}

// +kubebuilder:object:root=true
// +kubebuilder:subresource:status
// +kubebuilder:storageversion

// LBTargetGroup is the Schema for the LBTargetGroups API. Provides a Target Group resource for use with Load Balancers.
// +kubebuilder:printcolumn:name="SYNCED",type="string",JSONPath=".status.conditions[?(@.type=='Synced')].status"
// +kubebuilder:printcolumn:name="READY",type="string",JSONPath=".status.conditions[?(@.type=='Ready')].status"
// +kubebuilder:printcolumn:name="EXTERNAL-NAME",type="string",JSONPath=".metadata.annotations.crossplane\\.io/external-name"
// +kubebuilder:printcolumn:name="AGE",type="date",JSONPath=".metadata.creationTimestamp"
// +kubebuilder:resource:scope=Cluster,categories={crossplane,managed,aws}
type LBTargetGroup struct {
	metav1.TypeMeta   `json:",inline"`
	metav1.ObjectMeta `json:"metadata,omitempty"`
	// +kubebuilder:validation:XValidation:rule="!('*' in self.managementPolicies || 'Create' in self.managementPolicies || 'Update' in self.managementPolicies) || has(self.forProvider.name) || (has(self.initProvider) && has(self.initProvider.name))",message="spec.forProvider.name is a required parameter"
	Spec   LBTargetGroupSpec   `json:"spec"`
	Status LBTargetGroupStatus `json:"status,omitempty"`
}

// +kubebuilder:object:root=true

// LBTargetGroupList contains a list of LBTargetGroups
type LBTargetGroupList struct {
	metav1.TypeMeta `json:",inline"`
	metav1.ListMeta `json:"metadata,omitempty"`
	Items           []LBTargetGroup `json:"items"`
}

// Repository type metadata.
var (
	LBTargetGroup_Kind             = "LBTargetGroup"
	LBTargetGroup_GroupKind        = schema.GroupKind{Group: CRDGroup, Kind: LBTargetGroup_Kind}.String()
	LBTargetGroup_KindAPIVersion   = LBTargetGroup_Kind + "." + CRDGroupVersion.String()
	LBTargetGroup_GroupVersionKind = CRDGroupVersion.WithKind(LBTargetGroup_Kind)
)

func init() {
	SchemeBuilder.Register(&LBTargetGroup{}, &LBTargetGroupList{})
}