[For Sale] Complete kits or DIY (WorldWide)

[metaljay]

I have kits still available!

---

There was surprisingly more interest than I expected from my previous post so decided to list again.

If you are struggling to solder or don’t want the hassle ordering all the small components and flashing.
Drop me an email if you are interested in purchasing. These are the latest V2B kits and have everything as per the guide.

I have both 4 and 6 wire kits available. Though for the 4 wire kits I am unable to test as I don’t have a 4 wire pump.

• Hardware only (requires you to solder and flash): £15 (plus postage)
• Fully assembled and flashed kit: £40 (plus postage)

Mainland UK is £4 postage and usually next working day
USA/Canada is £10 (marked as gift to keep costs down) - usually 5-10 working days
Europe is £8 (marked as gift to keep costs down) - usually 5 working days

Happy for PayPal or bank transfer.
Drop me an email to discuss: warps_gazers_0j@icloud.com (iCloud hide my email address)

Its worth noting, I'm not a business - I'm just one guy so whilst I'm usually pretty quick it may be a week before I can make one up.

Thanks

A few photos of previous ones:

[WesWesthaver]

@metaljay Thanks for offering this service. I received my module in 6 days from UK to USA.

As I said in my email to you, I'm up to my @$$ in alligators right now and I really appreciated you providing a pre-assembled module complete with firmware.

I was able to get up and running quickly and can stay focused on the other things demanding my attention right now.

Thanks again,
-Wes

[Alexd911]

Hey,

So you still have some of these boards avaialble?

Regard
Alex

[metaljay]

I do, drop me an email if you’re interested. You’ll need to confirm if your pump is 4 or 6 wire.

[Captain0Kangaroo]

Ordered my board which arrived quickly.
Simply opened up my pump housing and plugged in the module. Popped the cover back on and was up and running in minutes.
Great service and would 100% recommend 👍

[piffmunday]

I dropped a reply on another thread but I am interested in these if you still have one.

[metaljay]

I do, send me an email above.
Have a few built

[metaljay]

Still have some of these if anyone interested

[Chris-lal]

Hi, also interested, I dropped you an email!

[No-World-Order]

I received mine in NL and it worked great. First i had some trouble, but got all the support needed to get things going. If you are looking for this i can recommend getting it from him! :)

[robxbl69]

Dropping you an email now ;)

[robxbl69]

Received kit yesterday, will put together tomorrow. Watch this space :)

[robxbl69]

Kit went together without any issues, all flashed and connected to my wifi. Before I fit it to the pump I want to print the enclosure I designed this afternoon. Preview below:

[coreypottebaum]

Would you be willing to share the print file for this?

[robxbl69]

Yes sure, I'd always planned to do so. Will sort either later today or tomorrow.

[colinpeddle]

Did you ever share this somewhere?

[AttiMM]

Hi @robxbl69 , can we receive the print file (as you promised ;-) ) ?

[Mat-Moo]

Still got some?

[metaljay]

I do, drop me an email.
I’m on holiday until 1st November though

[Mat-Moo]

Sent email

[Mat-Moo]

Received built and ready to install, thanks for help and support

[mpjanofsky]

Just got my kit yesterday and have it installed and working. Thanks for the quick shipping!

[coreypottebaum]

Add another happy customer here. Thanks!

[victordiges]

I got my kit today, looking forward to install it asap! :)

[ticho777]

Hi, I am also interested. I just dropped you an email! thank you in advance.

[Rodrigocicci]

Sent you an email. if you still have any 6 wire board ready i would like to prchase one. Thanks in advance.

[yelhsa083]

Thanks @metaljay received diy kits quickly to Australia. Put one together today & is now connected to HA. Added pins & sockets for wires & modules. Just have to now figure out some automations...

[MaciverVFR]

Got the "Ready to go Kit" out of layzines.
Took some time to get but it was the postaloffice that sat on it.
Works good (if you choose the right pump ;-) )
Thx @metaljay

[ticho777]

@metaljay Just got the board. Thank you again for all the help and a lot of patience. :-)

[StevN28]

Thanks @metaljay received in about a week in France
Work properly with Tahiti S100101

[karls238]

@metaljay Hello ! The kit is always available ? Could you please give the price for a 6 wire Maldive for france ? Fully assembled and flashed kit, Thanks by advance !

[Everdol]

Hello, is it possible to manage the spa outside home, with the mobile data or it´s necessary to be at home and to use the same wifi? (sorry about my english)

[fran2a]

Just received a fully assembled kit from @metaljay. Takes about 10 days to south France. Work perfectly with Hawaii Hydrojet Pro (6 wires) (same Maldives). Integration with HA works great.
Thanks a lot.

[collse]

any more kits available in the UK?

[Dazman85]

I received a kit a few days ago after a few emails back and forth. The emails were very prompt and really helpful. Item received about 2 days after the order was placed. This was a uk order.
thanks for the kit

[collse]

yeah I got mine yesterday before finding out my model number is actually not supported - apart from that good service and fast delivery as well

[milmber]

@metaljay , thank you for the kit and quick turnaround. Works perfectly in my LazySPA Hawaii HydroJet.

[AttiMM]

@metaljay : I received mine, thanks for the fast shipping! 👍

[malcolmrigg]

Thanks @metaljay , what a service 😄

[jmadejek]

Wiring for S200102 will be the same?

[metaljay]

You’ll have to open your pump to confirm if it’s 6 or 4 wire version to be 100%

[Peele69]

@metaljay Thank you, the pcb works very good! Fast response to my questions.

[alexapps1]

Thanks @metaljay

Received super fast. Cheers! Getting the same issue as a few people here: #673

What pump do you have?

[karls238]

Hello ! The spa display dont work anymore since several days..., all is ok from wifi. Previously all works perfectly...On the spa display when I press buttons there is no longueur bip. And if I press a buttons on thé spa display nothing work. Maybe I have accidentaly tick something wrong in the menu ? Thanks by advance !

[metaljay]

Hello ! The spa display dont work anymore since several days..., all is ok from wifi. Previously all works perfectly...On the spa display when I press buttons there is no longueur bip. And if I press a buttons on thé spa display nothing work. Maybe I have accidentaly tick something wrong in the menu ? Thanks by advance !

Hello, few questions. did it ever work? Has it been wet or cable become loose? The soldering looks good still? No corrosion?
Have you checked your pump config hasn’t become lost and you need to re-enable?
Finally, can you lift and resit the red circuit board (whilst it’s all plugged in) once it’s back in press the RST button and let me know if anything changes

[karls238]

Hello ! Yes it work perfectly during 2 or 3 weeks. The screen of the spa is ok, and when for exemple I Ask for pump or heat trough wifi, the associated buttons light on correctly. If I push the reset button I cant risk to Lose the software upload ? Thanks by advance for your help. I will let you inform.

[metaljay]

Hello ! Yes it work perfectly during 2 or 3 weeks. The screen of the spa is ok, and when for exemple I Ask for pump or heat trough wifi, the associated buttons light on correctly. If I push the reset button I cant risk to Lose the software upload ? Thanks by advance for your help. I will let you inform.

Correct, you can’t lose the software installed

[karls238]

Thanks a lot, I will check and reset if necessary, I will let you know, thx by advance.