Skip to content

Latest commit

 

History

History
91 lines (70 loc) · 3.88 KB

README.md

File metadata and controls

91 lines (70 loc) · 3.88 KB

The DS3231 real time clock chip

This is a remarkably inexpensive and easily interfaced battery-backed RTC. It is an ideal way to rapidly calibrate the Pyboard's RTC which can then achieve similar levels of accuracy (+- ~2 mins/year). The chip can also provide accurate time to platforms lacking a good RTC (notably the ESP8266).

Two drivers are provided:

  1. ds3231_port.py A multi-platform driver.
  2. ds3231_pb.py A Pyboard-specific driver with RTC calibration facility.

Breakout boards are widely available. The interface is I2C. Pullups to 3.3V (typically 10KΩ) should be provided on the SCL and SDA lines if these are not supplied on the breakout board.

Both divers use edge detection to achieve millisecond-level precision from the DS3231. This enables relatively rapid accuracy testing of the platform's RTC, and fast calibration of the Pyboard's RTC.

1. The multi-platform driver

This can use soft I2C so any pins may be used.

It is based on the assumption that, where a hardware RTC exists, MicroPython's local time (utime.localtime()) is based on the RTC time. Changes to local time don't propagate to the RTC which must explicitly be set. This holds for the Pyboard, ESP8266 and ESP32.

The official ESP32 port currently lacks support for the RTC so the Loboris port should be used for this purpose. The driver supports both but if the official port is used only the local time can be updated from the DS3231.

1.1 The DS3231 class

Constructor:
This takes one mandatory argument, an initialised I2C bus.

Public methods:

  1. get_time Optional boolean arg set_rtc=False. If set_rtc is True it sets the platform's RTC from the DS3231. It returns the DS3231 time as a tuple in the same format as utime.localtime() except that yday (day of year) is 0. So the format is (year, month, day, hour, minute, second, wday, 0).
    Note that on ports/platforms which don't support an RTC, if set_rtc is True, the local time will be set from the DS3231.
  2. save_time No args. Sets the DS3231 time from the platform's local time.
  3. rtc_test Optional args: runtime=600, ppm=False. This tests the platform's local time against the DS3231 returning the error in parts per million (if ppm is True) or seconds per year. A positive value indicates that the DS3231 clock leads the platform local time. The runtime value in seconds defines the duration of the test. The default of 10 minutes provides high accuracy but shorter durations will suffice on devices with poor RTC's (e.g. ESP8266).

2. The Pyboard driver

The principal reason to use this driver is to calibrate the Pyboard's RTC.

This assumes that the DS3231 is connected to the hardware I2C port on the X or Y side of the board, and that the Pyboard's RTC is set to the correct time and date.

Usage to calibrate the Pyboard's RTC. Takes 5 minutes.

from ds3231_pb import DS3231
ds3231 = DS3231('X')
ds3231.save_time()  # Set DS3231 to match Pyboard RTC
ds3231.calibrate()

Calibration data is stored in battery-backed memory. So if a backup cell is used the RTC will run accurately in the event of a power outage.

2.1 The DS3231 class

Constructor:
This takes one mandatory argument, a string identifying the Pyboard side in use ('X' or 'Y').

Public methods:

  1. get_time Optional boolean arg set_rtc=False. If set_rtc is True it sets the Pyboard's RTC from the DS3231. It returns the DS3231 time as a tuple in the same format as utime.localtime() except that yday (day of year) is 0. namely (year, month, day, hour, minute, second, wday, 0).
  2. save_time No args. Sets the DS3231 time from the Pyboard's RTC.
  3. calibrate Optional arg minutes=5. The time to run. This calculates the calibration factor and applies it to the Pyboard. It returns the calibration factor which may be stored in a file if the calibration needs to survive an outage of all power sources.