Skip to content

Latest commit

 

History

History
52 lines (49 loc) · 2.67 KB

1.2.1.rst

File metadata and controls

52 lines (49 loc) · 2.67 KB
Raw

1.2.1

VyOS 1.2.1 is a maintenance release made in April 2019.

Resolved issues

  • Package updates: kernel 4.19.32, open-vm-tools 10.3, latest Intel NIC drivers
  • :vytask:`T1326` The kernel now includes drivers for various USB serial adapters, which allows people to add a serial console to a machine without onboard RS232, or connect to something else from the router
  • The collection of network card firmware is now much more extensive
  • :vytask:`T1271` VRRP now correctly uses a virtual rather than physical MAC addresses in the RFC-compliant mode
  • :vytask:`T1330` DHCP WPAD URL option works correctly again
  • :vytask:`T1312` Many to many NAT rules now can use source/destination and translation networks of non-matching size. If 1:1 network bits translation is desired, it's now users responsibility to check if prefix length matches.
  • :vytask:`T1290` IPv6 network prefix translation is fixed
  • :vytask:`T1308` Non-alphanumeric characters such as > can now be safely used in PPPoE passwords
  • :vytask:`T1305` show | commands no longer fails when a config section ends with a leaf node such as timezone in show system | commands
  • :vytask:`T1235` show | commands correctly works in config mode now
  • :vytask:`T1298` VTI is now compatible with the DHCP-interface IPsec option
  • :vytask:`T1277` show dhcp server statistics command was broken in latest Crux
  • :vytask:`T1261` An issue with TFTP server refusing to listen on addresses other than loopback was fixed
  • :vytask:`T1224` Template issue that might cause UDP broadcast relay fail to start is fixed
  • :vytask:`T1067` VXLAN value validation is improved
  • :vytask:`T1211` Blank hostnames in DHCP updates no longer can crash DNS forwarding
  • :vytask:`T1322` Correct configuration is now generated for DHCPv6 relays with more than one upstream interface
  • :vytask:`T1234` relay-agents-packets option works correctly now
  • :vytask:`T1231` Dynamic DNS data is now cleaned on configuration change
  • :vytask:`T1282` Remote Syslog can now use a fully qualified domain name
  • :vytask:`T1279` ACPI power off works again
  • :vytask:`T1247` Negation in WAN load balancing rules works again
  • :vytask:`T1218` FRR staticd now starts on boot correctly
  • :vytask:`T1296` The installer now correctly detects SD card devices
  • :vytask:`T1225` Wireguard peers can be disabled now
  • :vytask:`T1217` The issue with Wireguard interfaces impossible to delete is fixed
  • :vytask:`T1160` Unintended IPv6 access is fixed in SNMP configuration
  • :vytask:`T1060` It's now possible to exclude hosts from the transparent web proxy
  • :vytask:`T484` An issue with rules impossible to delete from the zone-based firewall is fixed