XML section name
<remote>
</remote>Configuration of manager to listen for events from the agents.
Specifies a type of incoming connection to accept: secure or syslog.
| Default value | secure |
| Allowed values | secure, syslog |
Specifies the port to use to listen for events.
| Default value | 1514 if secure, 514 if syslog |
| Allowed values | Any port number from 1 to 65535 |
Specifies the protocol to use. It is available for secure connections and syslog events.
| Default value | udp |
| Allowed values | udp, tcp |
Note
It is not possible to use both protocols simultaneously.
List of IP addresses that are allowed to send syslog messages to the server (one per line).
| Default value | n/a |
| Allowed values | Any IP address or network |
Note
It is necessary to list at least one IP address when using the syslog connection type.
List of IP addresses that are not allowed to send syslog messages to the server (one per line).
| Default value | n/a |
| Allowed values | Any IP address or network |
Local ip address to use to listen for connections.
| Default value | All interfaces |
| Allowed values | Any internal ip address |
Local ipv6 address to listen for connections.
| Default value | n/a |
| Allowed values | Any IPv6 address |
Sets the capacity of the remote daemon queue in number of events.
| Default value | 16384 |
| Allowed values | Any number between 1 and 262144. |
<remote>
<connection>syslog</connection>
<port>514</port>
<protocol>udp</protocol>
<allowed-ips>192.168.1.0/24</allowed-ips>
<local_ip>192.168.1.5</local_ip>
</remote>
<remote>
<connection>secure</connection>
<port>1514</port>
<protocol>udp</protocol>
<queue_size>16384</queue_size>
</remote>