Skip to content

Latest commit

 

History

History
138 lines (103 loc) · 4 KB

README.md

File metadata and controls

138 lines (103 loc) · 4 KB

ggkbdd

This project is a generic gaming keyboard daemon.

This is just a proof of concept right now

The basic functionality is:

  • one key is designated as the mode toggle key
  • keys can be configured to play macros
  • when the user presses the mode toggle key, the keyboard switches to the macro mode.
    • when pressing a macro key, the configured macro sequence is replayed
    • any non-configured key events are discarded now
  • when the user presses Esc or the mode toggle key again, the keyboard switches back to normal mode

How does it work

ggkbdd runs as root and listens to keyboard events. It also creates a virtual keyboard device through uinput.

In macro mode, ggkbdd grabs the keyboard device so no other client can receive events. This makes it appear as if the device is in a special mode.

When key presses for configured keys are received, the configured sequence is simply replayed on the uinput device.

This all happens just above the kernel level, there's no desktop integration and this happens silently without the rest of the system knowing.

How to run

Use evemu-record or libinput record to figure out the device node of your keyboard device. Then use this as argument here:

> sudo ./ggkbdd.py --verbose /dev/input/event3

Installation

Don't bother, because it's so small it's almost not worth it. But if you must...

> sudo ./setup.py install

It's using python setuptool, there's heaps of documentation out there that'll explain what options are possible.

Configuration

The config file is $XDG_CONFIG_HOME/ggkbddrc or the one specified with --config path/to/config. Its contents must be:

[General]
ModeKey=RIGHTCTRL

[Macros]
A=B C
F11=H E L L O
LEFTCTRL=+LEFTSHIFT U P P E R -LEFTSHIFT L O W ER

This example uses capslock as the mode key and maps the A key to the key sequence "bc" and F11 to the key sequence "hello".

All key-related entries must match the key names as defined in linux/input-event-codes.h. If the key is prefixed by + it is sent as a key press only. If the key is prefixed by a -, it is sent as a key release only. If any key is still down at the end of the macro, you're going to get key repeats so don't do that.

Use evemu-record or evtest to read the key codes.

Coincidentally: capslock is a really bad mode key because we can only grab it after the key was sent and processed by everyone else too. So you'll have your capslock key randomly stuck. Pick a different key. There, I saved you some debugging if you bothered to actually read the README.

Keyboard layouts

ggkbdd doesn't care about the keyboard layout you may have configured in the desktop environment, it sits below all that and effectively uses a US keyboard layout without a shift key. The keys always send the same evdev codes, whether you have qwerty, azerty or dvorak configured.

This goes for both the input key and the output keys. If you map KEY_Q to KEY_Z this effectively maps 'a' to 'w' in azwerty or 'q' to 'y' in a german keyboard layout.

You cannot map shift level keys like the exclamation mark, it's on KEY_1.

systemd autostart

Use this systemd file:

> cat /etc/systemd/system/ggkbd@.service
[Unit]
Description=ggkbbd auto-starter
BindsTo=dev-input-%i.device

[Service]
Type=simple
ExecStart=/usr/bin/ggkbdd --config /path/to/ggkbddrc /dev/input/%I

Use this udev rule:

> cat /etc/udev/rules.d/99-ggkbdd.rules
ACTION=="remove", GOTO="ggkbdd_end"
KERNEL!="event*", GOTO="ggkbdd_end"

KERNELS=="input*", \
   ENV{ID_INPUT_KEYBOARD}=="1", \
    ATTRS{name}=="AT Translated*", \
    TAG+="systemd", ENV{SYSTEMD_WANTS}="ggkbdd@%k.service"

LABEL="ggkbdd_end"

This will start ggkbdd for every keyboard with "AT Translated" in the name. ggkbdd creates a virtual device GGKBDD your device's real name, better make sure the udev rule doesn't match that too.

About

The name ggkbdd was chosen to make it as weird as possible to type. You're welcome.