IWormholeRelayer.sol

// SPDX-License-Identifier: Apache 2

pragma solidity ^0.8.0;

/**
 * @title WormholeRelayer
 * @author
 * @notice This project allows developers to build cross-chain applications powered by Wormhole without needing to
 * write and run their own relaying infrastructure
 *
 * We implement the IWormholeRelayer interface that allows users to request a delivery provider to relay a payload (and/or additional messages)
 * to a chain and address of their choice.
 */

/**
 * @notice VaaKey identifies a wormhole message
 *
 * @custom:member chainId Wormhole chain ID of the chain where this VAA was emitted from
 * @custom:member emitterAddress Address of the emitter of the VAA, in Wormhole bytes32 format
 * @custom:member sequence Sequence number of the VAA
 */
struct VaaKey {
    uint16 chainId;
    bytes32 emitterAddress;
    uint64 sequence;
}

// 0-127 are reserved for standardized KeyTypes, 128-255 are for custom use
uint8 constant VAA_KEY_TYPE = 1;

struct MessageKey {
    uint8 keyType; // 0-127 are reserved for standardized KeyTypes, 128-255 are for custom use
    bytes encodedKey;
}

interface IWormholeRelayerBase {
    event SendEvent(
        uint64 indexed sequence,
        uint256 deliveryQuote,
        uint256 paymentForExtraReceiverValue
    );

    function getRegisteredWormholeRelayerContract(
        uint16 chainId
    ) external view returns (bytes32);

    /**
     * @notice Returns true if a delivery has been attempted for the given deliveryHash
     * Note: invalid deliveries where the tx reverts are not considered attempted
     */
    function deliveryAttempted(
        bytes32 deliveryHash
    ) external view returns (bool attempted);

    /**
     * @notice block number at which a delivery was successfully executed
     */
    function deliverySuccessBlock(
        bytes32 deliveryHash
    ) external view returns (uint256 blockNumber);

    /**
     * @notice block number of the latest attempt to execute a delivery that failed
     */
    function deliveryFailureBlock(
        bytes32 deliveryHash
    ) external view returns (uint256 blockNumber);
}

/**
 * @title IWormholeRelayerSend
 * @notice The interface to request deliveries
 */
interface IWormholeRelayerSend is IWormholeRelayerBase {
    /**
     * @notice Publishes an instruction for the default delivery provider
     * to relay a payload to the address `targetAddress` on chain `targetChain`
     * with gas limit `gasLimit` and `msg.value` equal to `receiverValue`
     *
     * `targetAddress` must implement the IWormholeReceiver interface
     *
     * This function must be called with `msg.value` equal to `quoteEVMDeliveryPrice(targetChain, receiverValue, gasLimit)`
     *
     * Any refunds (from leftover gas) will be paid to the delivery provider. In order to receive the refunds, use the `sendPayloadToEvm` function
     * with `refundChain` and `refundAddress` as parameters
     *
     * @param targetChain in Wormhole Chain ID format
     * @param targetAddress address to call on targetChain (that implements IWormholeReceiver)
     * @param payload arbitrary bytes to pass in as parameter in call to `targetAddress`
     * @param receiverValue msg.value that delivery provider should pass in for call to `targetAddress` (in targetChain currency units)
     * @param gasLimit gas limit with which to call `targetAddress`.
     * @return sequence sequence number of published VAA containing delivery instructions
     */
    function sendPayloadToEvm(
        uint16 targetChain,
        address targetAddress,
        bytes memory payload,
        uint256 receiverValue,
        uint256 gasLimit
    ) external payable returns (uint64 sequence);

    /**
     * @notice Publishes an instruction for the default delivery provider
     * to relay a payload to the address `targetAddress` on chain `targetChain`
     * with gas limit `gasLimit` and `msg.value` equal to `receiverValue`
     *
     * Any refunds (from leftover gas) will be sent to `refundAddress` on chain `refundChain`
     * `targetAddress` must implement the IWormholeReceiver interface
     *
     * This function must be called with `msg.value` equal to `quoteEVMDeliveryPrice(targetChain, receiverValue, gasLimit)`
     *
     * @param targetChain in Wormhole Chain ID format
     * @param targetAddress address to call on targetChain (that implements IWormholeReceiver)
     * @param payload arbitrary bytes to pass in as parameter in call to `targetAddress`
     * @param receiverValue msg.value that delivery provider should pass in for call to `targetAddress` (in targetChain currency units)
     * @param gasLimit gas limit with which to call `targetAddress`. Any units of gas unused will be refunded according to the
     *        `targetChainRefundPerGasUnused` rate quoted by the delivery provider
     * @param refundChain The chain to deliver any refund to, in Wormhole Chain ID format
     * @param refundAddress The address on `refundChain` to deliver any refund to
     * @return sequence sequence number of published VAA containing delivery instructions
     */
    function sendPayloadToEvm(
        uint16 targetChain,
        address targetAddress,
        bytes memory payload,
        uint256 receiverValue,
        uint256 gasLimit,
        uint16 refundChain,
        address refundAddress
    ) external payable returns (uint64 sequence);

    /**
     * @notice Publishes an instruction for the default delivery provider
     * to relay a payload and VAAs specified by `vaaKeys` to the address `targetAddress` on chain `targetChain`
     * with gas limit `gasLimit` and `msg.value` equal to `receiverValue`
     *
     * `targetAddress` must implement the IWormholeReceiver interface
     *
     * This function must be called with `msg.value` equal to `quoteEVMDeliveryPrice(targetChain, receiverValue, gasLimit)`
     *
     * Any refunds (from leftover gas) will be paid to the delivery provider. In order to receive the refunds, use the `sendVaasToEvm` function
     * with `refundChain` and `refundAddress` as parameters
     *
     * @param targetChain in Wormhole Chain ID format
     * @param targetAddress address to call on targetChain (that implements IWormholeReceiver)
     * @param payload arbitrary bytes to pass in as parameter in call to `targetAddress`
     * @param receiverValue msg.value that delivery provider should pass in for call to `targetAddress` (in targetChain currency units)
     * @param gasLimit gas limit with which to call `targetAddress`.
     * @param vaaKeys Additional VAAs to pass in as parameter in call to `targetAddress`
     * @return sequence sequence number of published VAA containing delivery instructions
     */
    function sendVaasToEvm(
        uint16 targetChain,
        address targetAddress,
        bytes memory payload,
        uint256 receiverValue,
        uint256 gasLimit,
        VaaKey[] memory vaaKeys
    ) external payable returns (uint64 sequence);

    /**
     * @notice Publishes an instruction for the default delivery provider
     * to relay a payload and VAAs specified by `vaaKeys` to the address `targetAddress` on chain `targetChain`
     * with gas limit `gasLimit` and `msg.value` equal to `receiverValue`
     *
     * Any refunds (from leftover gas) will be sent to `refundAddress` on chain `refundChain`
     * `targetAddress` must implement the IWormholeReceiver interface
     *
     * This function must be called with `msg.value` equal to `quoteEVMDeliveryPrice(targetChain, receiverValue, gasLimit)`
     *
     * @param targetChain in Wormhole Chain ID format
     * @param targetAddress address to call on targetChain (that implements IWormholeReceiver)
     * @param payload arbitrary bytes to pass in as parameter in call to `targetAddress`
     * @param receiverValue msg.value that delivery provider should pass in for call to `targetAddress` (in targetChain currency units)
     * @param gasLimit gas limit with which to call `targetAddress`. Any units of gas unused will be refunded according to the
     *        `targetChainRefundPerGasUnused` rate quoted by the delivery provider
     * @param vaaKeys Additional VAAs to pass in as parameter in call to `targetAddress`
     * @param refundChain The chain to deliver any refund to, in Wormhole Chain ID format
     * @param refundAddress The address on `refundChain` to deliver any refund to
     * @return sequence sequence number of published VAA containing delivery instructions
     */
    function sendVaasToEvm(
        uint16 targetChain,
        address targetAddress,
        bytes memory payload,
        uint256 receiverValue,
        uint256 gasLimit,
        VaaKey[] memory vaaKeys,
        uint16 refundChain,
        address refundAddress
    ) external payable returns (uint64 sequence);

    /**
     * @notice Publishes an instruction for the delivery provider at `deliveryProviderAddress`
     * to relay a payload and VAAs specified by `vaaKeys` to the address `targetAddress` on chain `targetChain`
     * with gas limit `gasLimit` and `msg.value` equal to
     * receiverValue + (arbitrary amount that is paid for by paymentForExtraReceiverValue of this chain's wei) in targetChain wei.
     *
     * Any refunds (from leftover gas) will be sent to `refundAddress` on chain `refundChain`
     * `targetAddress` must implement the IWormholeReceiver interface
     *
     * This function must be called with `msg.value` equal to
     * quoteEVMDeliveryPrice(targetChain, receiverValue, gasLimit, deliveryProviderAddress) + paymentForExtraReceiverValue
     *
     * @param targetChain in Wormhole Chain ID format
     * @param targetAddress address to call on targetChain (that implements IWormholeReceiver)
     * @param payload arbitrary bytes to pass in as parameter in call to `targetAddress`
     * @param receiverValue msg.value that delivery provider should pass in for call to `targetAddress` (in targetChain currency units)
     * @param paymentForExtraReceiverValue amount (in current chain currency units) to spend on extra receiverValue
     *        (in addition to the `receiverValue` specified)
     * @param gasLimit gas limit with which to call `targetAddress`. Any units of gas unused will be refunded according to the
     *        `targetChainRefundPerGasUnused` rate quoted by the delivery provider
     * @param refundChain The chain to deliver any refund to, in Wormhole Chain ID format
     * @param refundAddress The address on `refundChain` to deliver any refund to
     * @param deliveryProviderAddress The address of the desired delivery provider's implementation of IDeliveryProvider
     * @param vaaKeys Additional VAAs to pass in as parameter in call to `targetAddress`
     * @param consistencyLevel Consistency level with which to publish the delivery instructions - see
     *        https://book.wormhole.com/wormhole/3_coreLayerContracts.html?highlight=consistency#consistency-levels
     * @return sequence sequence number of published VAA containing delivery instructions
     */
    function sendToEvm(
        uint16 targetChain,
        address targetAddress,
        bytes memory payload,
        uint256 receiverValue,
        uint256 paymentForExtraReceiverValue,
        uint256 gasLimit,
        uint16 refundChain,
        address refundAddress,
        address deliveryProviderAddress,
        VaaKey[] memory vaaKeys,
        uint8 consistencyLevel
    ) external payable returns (uint64 sequence);

    /**
     * @notice Publishes an instruction for the delivery provider at `deliveryProviderAddress`
     * to relay a payload and external messages specified by `messageKeys` to the address `targetAddress` on chain `targetChain`
     * with gas limit `gasLimit` and `msg.value` equal to
     * receiverValue + (arbitrary amount that is paid for by paymentForExtraReceiverValue of this chain's wei) in targetChain wei.
     *
     * Any refunds (from leftover gas) will be sent to `refundAddress` on chain `refundChain`
     * `targetAddress` must implement the IWormholeReceiver interface
     *
     * This function must be called with `msg.value` equal to
     * quoteEVMDeliveryPrice(targetChain, receiverValue, gasLimit, deliveryProviderAddress) + paymentForExtraReceiverValue
     *
     * Note: MessageKeys can specify wormhole messages (VaaKeys) or other types of messages (ex. USDC CCTP attestations). Ensure the selected
     * DeliveryProvider supports all the MessageKey.keyType values specified or it will not be delivered!
     *
     * @param targetChain in Wormhole Chain ID format
     * @param targetAddress address to call on targetChain (that implements IWormholeReceiver)
     * @param payload arbitrary bytes to pass in as parameter in call to `targetAddress`
     * @param receiverValue msg.value that delivery provider should pass in for call to `targetAddress` (in targetChain currency units)
     * @param paymentForExtraReceiverValue amount (in current chain currency units) to spend on extra receiverValue
     *        (in addition to the `receiverValue` specified)
     * @param gasLimit gas limit with which to call `targetAddress`. Any units of gas unused will be refunded according to the
     *        `targetChainRefundPerGasUnused` rate quoted by the delivery provider
     * @param refundChain The chain to deliver any refund to, in Wormhole Chain ID format
     * @param refundAddress The address on `refundChain` to deliver any refund to
     * @param deliveryProviderAddress The address of the desired delivery provider's implementation of IDeliveryProvider
     * @param messageKeys Additional messagess to pass in as parameter in call to `targetAddress`
     * @param consistencyLevel Consistency level with which to publish the delivery instructions - see
     *        https://book.wormhole.com/wormhole/3_coreLayerContracts.html?highlight=consistency#consistency-levels
     * @return sequence sequence number of published VAA containing delivery instructions
     */
    function sendToEvm(
        uint16 targetChain,
        address targetAddress,
        bytes memory payload,
        uint256 receiverValue,
        uint256 paymentForExtraReceiverValue,
        uint256 gasLimit,
        uint16 refundChain,
        address refundAddress,
        address deliveryProviderAddress,
        MessageKey[] memory messageKeys,
        uint8 consistencyLevel
    ) external payable returns (uint64 sequence);

    /**
     * @notice Publishes an instruction for the delivery provider at `deliveryProviderAddress`
     * to relay a payload and VAAs specified by `vaaKeys` to the address `targetAddress` on chain `targetChain`
     * with `msg.value` equal to
     * receiverValue + (arbitrary amount that is paid for by paymentForExtraReceiverValue of this chain's wei) in targetChain wei.
     *
     * Any refunds (from leftover gas) will be sent to `refundAddress` on chain `refundChain`
     * `targetAddress` must implement the IWormholeReceiver interface
     *
     * This function must be called with `msg.value` equal to
     * quoteDeliveryPrice(targetChain, receiverValue, encodedExecutionParameters, deliveryProviderAddress) + paymentForExtraReceiverValue
     *
     * @param targetChain in Wormhole Chain ID format
     * @param targetAddress address to call on targetChain (that implements IWormholeReceiver), in Wormhole bytes32 format
     * @param payload arbitrary bytes to pass in as parameter in call to `targetAddress`
     * @param receiverValue msg.value that delivery provider should pass in for call to `targetAddress` (in targetChain currency units)
     * @param paymentForExtraReceiverValue amount (in current chain currency units) to spend on extra receiverValue
     *        (in addition to the `receiverValue` specified)
     * @param encodedExecutionParameters encoded information on how to execute delivery that may impact pricing
     *        e.g. for version EVM_V1, this is a struct that encodes the `gasLimit` with which to call `targetAddress`
     * @param refundChain The chain to deliver any refund to, in Wormhole Chain ID format
     * @param refundAddress The address on `refundChain` to deliver any refund to, in Wormhole bytes32 format
     * @param deliveryProviderAddress The address of the desired delivery provider's implementation of IDeliveryProvider
     * @param vaaKeys Additional VAAs to pass in as parameter in call to `targetAddress`
     * @param consistencyLevel Consistency level with which to publish the delivery instructions - see
     *        https://book.wormhole.com/wormhole/3_coreLayerContracts.html?highlight=consistency#consistency-levels
     * @return sequence sequence number of published VAA containing delivery instructions
     */
    function send(
        uint16 targetChain,
        bytes32 targetAddress,
        bytes memory payload,
        uint256 receiverValue,
        uint256 paymentForExtraReceiverValue,
        bytes memory encodedExecutionParameters,
        uint16 refundChain,
        bytes32 refundAddress,
        address deliveryProviderAddress,
        VaaKey[] memory vaaKeys,
        uint8 consistencyLevel
    ) external payable returns (uint64 sequence);

    /**
     * @notice Publishes an instruction for the delivery provider at `deliveryProviderAddress`
     * to relay a payload and VAAs specified by `vaaKeys` to the address `targetAddress` on chain `targetChain`
     * with `msg.value` equal to
     * receiverValue + (arbitrary amount that is paid for by paymentForExtraReceiverValue of this chain's wei) in targetChain wei.
     *
     * Any refunds (from leftover gas) will be sent to `refundAddress` on chain `refundChain`
     * `targetAddress` must implement the IWormholeReceiver interface
     *
     * This function must be called with `msg.value` equal to
     * quoteDeliveryPrice(targetChain, receiverValue, encodedExecutionParameters, deliveryProviderAddress) + paymentForExtraReceiverValue
     *
     * Note: MessageKeys can specify wormhole messages (VaaKeys) or other types of messages (ex. USDC CCTP attestations). Ensure the selected
     * DeliveryProvider supports all the MessageKey.keyType values specified or it will not be delivered!
     *
     * @param targetChain in Wormhole Chain ID format
     * @param targetAddress address to call on targetChain (that implements IWormholeReceiver), in Wormhole bytes32 format
     * @param payload arbitrary bytes to pass in as parameter in call to `targetAddress`
     * @param receiverValue msg.value that delivery provider should pass in for call to `targetAddress` (in targetChain currency units)
     * @param paymentForExtraReceiverValue amount (in current chain currency units) to spend on extra receiverValue
     *        (in addition to the `receiverValue` specified)
     * @param encodedExecutionParameters encoded information on how to execute delivery that may impact pricing
     *        e.g. for version EVM_V1, this is a struct that encodes the `gasLimit` with which to call `targetAddress`
     * @param refundChain The chain to deliver any refund to, in Wormhole Chain ID format
     * @param refundAddress The address on `refundChain` to deliver any refund to, in Wormhole bytes32 format
     * @param deliveryProviderAddress The address of the desired delivery provider's implementation of IDeliveryProvider
     * @param messageKeys Additional messagess to pass in as parameter in call to `targetAddress`
     * @param consistencyLevel Consistency level with which to publish the delivery instructions - see
     *        https://book.wormhole.com/wormhole/3_coreLayerContracts.html?highlight=consistency#consistency-levels
     * @return sequence sequence number of published VAA containing delivery instructions
     */
    function send(
        uint16 targetChain,
        bytes32 targetAddress,
        bytes memory payload,
        uint256 receiverValue,
        uint256 paymentForExtraReceiverValue,
        bytes memory encodedExecutionParameters,
        uint16 refundChain,
        bytes32 refundAddress,
        address deliveryProviderAddress,
        MessageKey[] memory messageKeys,
        uint8 consistencyLevel
    ) external payable returns (uint64 sequence);

    /**
     * @notice Requests a previously published delivery instruction to be redelivered
     * (e.g. with a different delivery provider)
     *
     * This function must be called with `msg.value` equal to
     * quoteEVMDeliveryPrice(targetChain, newReceiverValue, newGasLimit, newDeliveryProviderAddress)
     *
     *  @notice *** This will only be able to succeed if the following is true **
     *         - newGasLimit >= gas limit of the old instruction
     *         - newReceiverValue >= receiver value of the old instruction
     *         - newDeliveryProvider's `targetChainRefundPerGasUnused` >= old relay provider's `targetChainRefundPerGasUnused`
     *
     * @param deliveryVaaKey VaaKey identifying the wormhole message containing the
     *        previously published delivery instructions
     * @param targetChain The target chain that the original delivery targeted. Must match targetChain from original delivery instructions
     * @param newReceiverValue new msg.value that delivery provider should pass in for call to `targetAddress` (in targetChain currency units)
     * @param newGasLimit gas limit with which to call `targetAddress`. Any units of gas unused will be refunded according to the
     *        `targetChainRefundPerGasUnused` rate quoted by the delivery provider, to the refund chain and address specified in the original request
     * @param newDeliveryProviderAddress The address of the desired delivery provider's implementation of IDeliveryProvider
     * @return sequence sequence number of published VAA containing redelivery instructions
     *
     * @notice *** This will only be able to succeed if the following is true **
     *         - newGasLimit >= gas limit of the old instruction
     *         - newReceiverValue >= receiver value of the old instruction
     */
    function resendToEvm(
        VaaKey memory deliveryVaaKey,
        uint16 targetChain,
        uint256 newReceiverValue,
        uint256 newGasLimit,
        address newDeliveryProviderAddress
    ) external payable returns (uint64 sequence);

    /**
     * @notice Requests a previously published delivery instruction to be redelivered
     *
     *
     * This function must be called with `msg.value` equal to
     * quoteDeliveryPrice(targetChain, newReceiverValue, newEncodedExecutionParameters, newDeliveryProviderAddress)
     *
     * @param deliveryVaaKey VaaKey identifying the wormhole message containing the
     *        previously published delivery instructions
     * @param targetChain The target chain that the original delivery targeted. Must match targetChain from original delivery instructions
     * @param newReceiverValue new msg.value that delivery provider should pass in for call to `targetAddress` (in targetChain currency units)
     * @param newEncodedExecutionParameters new encoded information on how to execute delivery that may impact pricing
     *        e.g. for version EVM_V1, this is a struct that encodes the `gasLimit` with which to call `targetAddress`
     * @param newDeliveryProviderAddress The address of the desired delivery provider's implementation of IDeliveryProvider
     * @return sequence sequence number of published VAA containing redelivery instructions
     *
     *  @notice *** This will only be able to succeed if the following is true **
     *         - (For EVM_V1) newGasLimit >= gas limit of the old instruction
     *         - newReceiverValue >= receiver value of the old instruction
     *         - (For EVM_V1) newDeliveryProvider's `targetChainRefundPerGasUnused` >= old relay provider's `targetChainRefundPerGasUnused`
     */
    function resend(
        VaaKey memory deliveryVaaKey,
        uint16 targetChain,
        uint256 newReceiverValue,
        bytes memory newEncodedExecutionParameters,
        address newDeliveryProviderAddress
    ) external payable returns (uint64 sequence);

    /**
     * @notice Returns the price to request a relay to chain `targetChain`, using the default delivery provider
     *
     * @param targetChain in Wormhole Chain ID format
     * @param receiverValue msg.value that delivery provider should pass in for call to `targetAddress` (in targetChain currency units)
     * @param gasLimit gas limit with which to call `targetAddress`.
     * @return nativePriceQuote Price, in units of current chain currency, that the delivery provider charges to perform the relay
     * @return targetChainRefundPerGasUnused amount of target chain currency that will be refunded per unit of gas unused,
     *         if a refundAddress is specified.
     *         Note: This value can be overridden by the delivery provider on the target chain. The returned value here should be considered to be a
     *         promise by the delivery provider of the amount of refund per gas unused that will be returned to the refundAddress at the target chain.
     *         If a delivery provider decides to override, this will be visible as part of the emitted Delivery event on the target chain.
     */
    function quoteEVMDeliveryPrice(
        uint16 targetChain,
        uint256 receiverValue,
        uint256 gasLimit
    )
        external
        view
        returns (
            uint256 nativePriceQuote,
            uint256 targetChainRefundPerGasUnused
        );

    /**
     * @notice Returns the price to request a relay to chain `targetChain`, using delivery provider `deliveryProviderAddress`
     *
     * @param targetChain in Wormhole Chain ID format
     * @param receiverValue msg.value that delivery provider should pass in for call to `targetAddress` (in targetChain currency units)
     * @param gasLimit gas limit with which to call `targetAddress`.
     * @param deliveryProviderAddress The address of the desired delivery provider's implementation of IDeliveryProvider
     * @return nativePriceQuote Price, in units of current chain currency, that the delivery provider charges to perform the relay
     * @return targetChainRefundPerGasUnused amount of target chain currency that will be refunded per unit of gas unused,
     *         if a refundAddress is specified
     *         Note: This value can be overridden by the delivery provider on the target chain. The returned value here should be considered to be a
     *         promise by the delivery provider of the amount of refund per gas unused that will be returned to the refundAddress at the target chain.
     *         If a delivery provider decides to override, this will be visible as part of the emitted Delivery event on the target chain.
     */
    function quoteEVMDeliveryPrice(
        uint16 targetChain,
        uint256 receiverValue,
        uint256 gasLimit,
        address deliveryProviderAddress
    )
        external
        view
        returns (
            uint256 nativePriceQuote,
            uint256 targetChainRefundPerGasUnused
        );

    /**
     * @notice Returns the price to request a relay to chain `targetChain`, using delivery provider `deliveryProviderAddress`
     *
     * @param targetChain in Wormhole Chain ID format
     * @param receiverValue msg.value that delivery provider should pass in for call to `targetAddress` (in targetChain currency units)
     * @param encodedExecutionParameters encoded information on how to execute delivery that may impact pricing
     *        e.g. for version EVM_V1, this is a struct that encodes the `gasLimit` with which to call `targetAddress`
     * @param deliveryProviderAddress The address of the desired delivery provider's implementation of IDeliveryProvider
     * @return nativePriceQuote Price, in units of current chain currency, that the delivery provider charges to perform the relay
     * @return encodedExecutionInfo encoded information on how the delivery will be executed
     *        e.g. for version EVM_V1, this is a struct that encodes the `gasLimit` and `targetChainRefundPerGasUnused`
     *             (which is the amount of target chain currency that will be refunded per unit of gas unused,
     *              if a refundAddress is specified)
     */
    function quoteDeliveryPrice(
        uint16 targetChain,
        uint256 receiverValue,
        bytes memory encodedExecutionParameters,
        address deliveryProviderAddress
    )
        external
        view
        returns (uint256 nativePriceQuote, bytes memory encodedExecutionInfo);

    /**
     * @notice Returns the (extra) amount of target chain currency that `targetAddress`
     * will be called with, if the `paymentForExtraReceiverValue` field is set to `currentChainAmount`
     *
     * @param targetChain in Wormhole Chain ID format
     * @param currentChainAmount The value that `paymentForExtraReceiverValue` will be set to
     * @param deliveryProviderAddress The address of the desired delivery provider's implementation of IDeliveryProvider
     * @return targetChainAmount The amount such that if `targetAddress` will be called with `msg.value` equal to
     *         receiverValue + targetChainAmount
     */
    function quoteNativeForChain(
        uint16 targetChain,
        uint256 currentChainAmount,
        address deliveryProviderAddress
    ) external view returns (uint256 targetChainAmount);

    /**
     * @notice Returns the address of the current default delivery provider
     * @return deliveryProvider The address of (the default delivery provider)'s contract on this source
     *   chain. This must be a contract that implements IDeliveryProvider.
     */
    function getDefaultDeliveryProvider()
        external
        view
        returns (address deliveryProvider);
}

/**
 * @title IWormholeRelayerDelivery
 * @notice The interface to execute deliveries. Only relevant for Delivery Providers
 */
interface IWormholeRelayerDelivery is IWormholeRelayerBase {
    enum DeliveryStatus {
        SUCCESS,
        RECEIVER_FAILURE
    }

    enum RefundStatus {
        REFUND_SENT,
        REFUND_FAIL,
        CROSS_CHAIN_REFUND_SENT,
        CROSS_CHAIN_REFUND_FAIL_PROVIDER_NOT_SUPPORTED,
        CROSS_CHAIN_REFUND_FAIL_NOT_ENOUGH,
        NO_REFUND_REQUESTED
    }

    /**
     * @custom:member recipientContract - The target contract address
     * @custom:member sourceChain - The chain which this delivery was requested from (in wormhole
     *     ChainID format)
     * @custom:member sequence - The wormhole sequence number of the delivery VAA on the source chain
     *     corresponding to this delivery request
     * @custom:member deliveryVaaHash - The hash of the delivery VAA corresponding to this delivery
     *     request
     * @custom:member gasUsed - The amount of gas that was used to call your target contract
     * @custom:member status:
     *   - RECEIVER_FAILURE, if the target contract reverts
     *   - SUCCESS, if the target contract doesn't revert
     * @custom:member additionalStatusInfo:
     *   - If status is SUCCESS, then this is empty.
     *   - If status is RECEIVER_FAILURE, this is `RETURNDATA_TRUNCATION_THRESHOLD` bytes of the
     *       return data (i.e. potentially truncated revert reason information).
     * @custom:member refundStatus - Result of the refund. REFUND_SUCCESS or REFUND_FAIL are for
     *     refunds where targetChain=refundChain; the others are for targetChain!=refundChain,
     *     where a cross chain refund is necessary, or if the default code path is used where no refund is requested (NO_REFUND_REQUESTED)
     * @custom:member overridesInfo:
     *   - If not an override: empty bytes array
     *   - Otherwise: An encoded `DeliveryOverride`
     */
    event Delivery(
        address indexed recipientContract,
        uint16 indexed sourceChain,
        uint64 indexed sequence,
        bytes32 deliveryVaaHash,
        DeliveryStatus status,
        uint256 gasUsed,
        RefundStatus refundStatus,
        bytes additionalStatusInfo,
        bytes overridesInfo
    );

    /**
     * @notice The delivery provider calls `deliver` to relay messages as described by one delivery instruction
     *
     * The delivery provider must pass in the specified (by VaaKeys[]) signed wormhole messages (VAAs) from the source chain
     * as well as the signed wormhole message with the delivery instructions (the delivery VAA)
     *
     * The messages will be relayed to the target address (with the specified gas limit and receiver value) iff the following checks are met:
     * - the delivery VAA has a valid signature
     * - the delivery VAA's emitter is one of these WormholeRelayer contracts
     * - the delivery provider passed in at least enough of this chain's currency as msg.value (enough meaning the maximum possible refund)
     * - the instruction's target chain is this chain
     * - the relayed signed VAAs match the descriptions in container.messages (the VAA hashes match, or the emitter address, sequence number pair matches, depending on the description given)
     *
     * @param encodedVMs - An array of signed wormhole messages (all from the same source chain
     *     transaction)
     * @param encodedDeliveryVAA - Signed wormhole message from the source chain's WormholeRelayer
     *     contract with payload being the encoded delivery instruction container
     * @param relayerRefundAddress - The address to which any refunds to the delivery provider
     *     should be sent
     * @param deliveryOverrides - Optional overrides field which must be either an empty bytes array or
     *     an encoded DeliveryOverride struct
     */
    function deliver(
        bytes[] memory encodedVMs,
        bytes memory encodedDeliveryVAA,
        address payable relayerRefundAddress,
        bytes memory deliveryOverrides
    ) external payable;
}

interface IWormholeRelayer is IWormholeRelayerDelivery, IWormholeRelayerSend {}

/*
 *  Errors thrown by IWormholeRelayer contract
 */

// Bound chosen by the following formula: `memoryWord * 4 + selectorSize`.
// This means that an error identifier plus four fixed size arguments should be available to developers.
// In the case of a `require` revert with error message, this should provide 2 memory word's worth of data.
uint256 constant RETURNDATA_TRUNCATION_THRESHOLD = 132;

//When msg.value was not equal to `delivery provider's quoted delivery price` + `paymentForExtraReceiverValue`
error InvalidMsgValue(uint256 msgValue, uint256 totalFee);

error RequestedGasLimitTooLow();

error DeliveryProviderDoesNotSupportTargetChain(
    address relayer,
    uint16 chainId
);
error DeliveryProviderCannotReceivePayment();
error DeliveryProviderDoesNotSupportMessageKeyType(uint8 keyType);

//When calling `delivery()` a second time even though a delivery is already in progress
error ReentrantDelivery(address msgSender, address lockedBy);

error InvalidPayloadId(uint8 parsed, uint8 expected);
error InvalidPayloadLength(uint256 received, uint256 expected);
error InvalidVaaKeyType(uint8 parsed);
error TooManyMessageKeys(uint256 numMessageKeys);

error InvalidDeliveryVaa(string reason);
//When the delivery VAA (signed wormhole message with delivery instructions) was not emitted by the
//  registered WormholeRelayer contract
error InvalidEmitter(bytes32 emitter, bytes32 registered, uint16 chainId);
error MessageKeysLengthDoesNotMatchMessagesLength(uint256 keys, uint256 vaas);
error VaaKeysDoNotMatchVaas(uint8 index);
//When someone tries to call an external function of the WormholeRelayer that is only intended to be
//  called by the WormholeRelayer itself (to allow retroactive reverts for atomicity)
error RequesterNotWormholeRelayer();

//When trying to relay a `DeliveryInstruction` to any other chain but the one it was specified for
error TargetChainIsNotThisChain(uint16 targetChain);
//When a `DeliveryOverride` contains a gas limit that's less than the original
error InvalidOverrideGasLimit();
//When a `DeliveryOverride` contains a receiver value that's less than the original
error InvalidOverrideReceiverValue();
//When a `DeliveryOverride` contains a 'refund per unit of gas unused' that's less than the original
error InvalidOverrideRefundPerGasUnused();

//When the delivery provider doesn't pass in sufficient funds (i.e. msg.value does not cover the
// maximum possible refund to the user)
error InsufficientRelayerFunds(uint256 msgValue, uint256 minimum);

//When a bytes32 field can't be converted into a 20 byte EVM address, because the 12 padding bytes
//  are non-zero (duplicated from Utils.sol)
error NotAnEvmAddress(bytes32);