-
Notifications
You must be signed in to change notification settings - Fork 102
/
pl2303.c
1267 lines (1076 loc) · 32.8 KB
/
pl2303.c
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
// SPDX-License-Identifier: GPL-2.0
/*
* Prolific PL2303 USB to serial adaptor driver
*
* Copyright (C) 2001-2007 Greg Kroah-Hartman (greg@kroah.com)
* Copyright (C) 2003 IBM Corp.
*
* Original driver for 2.2.x by anonymous
*
* See Documentation/usb/usb-serial.rst for more information on using this
* driver
*/
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/tty.h>
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
#include <linux/serial.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/spinlock.h>
#include <linux/uaccess.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
#include <asm/unaligned.h>
#include "pl2303.h"
#define PL2303_QUIRK_UART_STATE_IDX0 BIT(0)
#define PL2303_QUIRK_LEGACY BIT(1)
#define PL2303_QUIRK_ENDPOINT_HACK BIT(2)
static const struct usb_device_id id_table[] = {
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID),
.driver_info = PL2303_QUIRK_ENDPOINT_HACK },
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ2) },
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_DCU11) },
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ3) },
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_CHILITAG) },
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_PHAROS) },
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_ALDIGA) },
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_MMX) },
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_GPRS) },
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_HCR331) },
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_MOTOROLA) },
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_ZTEK) },
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_TB) },
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_GC) },
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_GB) },
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_GT) },
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_GL) },
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_GE) },
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_GS) },
{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) },
{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID_RSAQ5) },
{ USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID),
.driver_info = PL2303_QUIRK_ENDPOINT_HACK },
{ USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_UC485),
.driver_info = PL2303_QUIRK_ENDPOINT_HACK },
{ USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_UC232B),
.driver_info = PL2303_QUIRK_ENDPOINT_HACK },
{ USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID2) },
{ USB_DEVICE(ATEN_VENDOR_ID2, ATEN_PRODUCT_ID) },
{ USB_DEVICE(ELCOM_VENDOR_ID, ELCOM_PRODUCT_ID) },
{ USB_DEVICE(ELCOM_VENDOR_ID, ELCOM_PRODUCT_ID_UCSGT) },
{ USB_DEVICE(ITEGNO_VENDOR_ID, ITEGNO_PRODUCT_ID) },
{ USB_DEVICE(ITEGNO_VENDOR_ID, ITEGNO_PRODUCT_ID_2080) },
{ USB_DEVICE(MA620_VENDOR_ID, MA620_PRODUCT_ID) },
{ USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID) },
{ USB_DEVICE(TRIPP_VENDOR_ID, TRIPP_PRODUCT_ID) },
{ USB_DEVICE(RADIOSHACK_VENDOR_ID, RADIOSHACK_PRODUCT_ID) },
{ USB_DEVICE(DCU10_VENDOR_ID, DCU10_PRODUCT_ID) },
{ USB_DEVICE(SITECOM_VENDOR_ID, SITECOM_PRODUCT_ID) },
{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_ID) },
{ USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_SX1),
.driver_info = PL2303_QUIRK_UART_STATE_IDX0 },
{ USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X65),
.driver_info = PL2303_QUIRK_UART_STATE_IDX0 },
{ USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X75),
.driver_info = PL2303_QUIRK_UART_STATE_IDX0 },
{ USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_EF81),
.driver_info = PL2303_QUIRK_ENDPOINT_HACK },
{ USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_ID_S81) }, /* Benq/Siemens S81 */
{ USB_DEVICE(SYNTECH_VENDOR_ID, SYNTECH_PRODUCT_ID) },
{ USB_DEVICE(NOKIA_CA42_VENDOR_ID, NOKIA_CA42_PRODUCT_ID) },
{ USB_DEVICE(CA_42_CA42_VENDOR_ID, CA_42_CA42_PRODUCT_ID) },
{ USB_DEVICE(SAGEM_VENDOR_ID, SAGEM_PRODUCT_ID) },
{ USB_DEVICE(LEADTEK_VENDOR_ID, LEADTEK_9531_PRODUCT_ID) },
{ USB_DEVICE(SPEEDDRAGON_VENDOR_ID, SPEEDDRAGON_PRODUCT_ID) },
{ USB_DEVICE(DATAPILOT_U2_VENDOR_ID, DATAPILOT_U2_PRODUCT_ID) },
{ USB_DEVICE(BELKIN_VENDOR_ID, BELKIN_PRODUCT_ID) },
{ USB_DEVICE(ALCOR_VENDOR_ID, ALCOR_PRODUCT_ID),
.driver_info = PL2303_QUIRK_ENDPOINT_HACK },
{ USB_DEVICE(WS002IN_VENDOR_ID, WS002IN_PRODUCT_ID) },
{ USB_DEVICE(COREGA_VENDOR_ID, COREGA_PRODUCT_ID) },
{ USB_DEVICE(YCCABLE_VENDOR_ID, YCCABLE_PRODUCT_ID) },
{ USB_DEVICE(SUPERIAL_VENDOR_ID, SUPERIAL_PRODUCT_ID) },
{ USB_DEVICE(HP_VENDOR_ID, HP_LD220_PRODUCT_ID) },
{ USB_DEVICE(HP_VENDOR_ID, HP_LD220TA_PRODUCT_ID) },
{ USB_DEVICE(HP_VENDOR_ID, HP_LD381_PRODUCT_ID) },
{ USB_DEVICE(HP_VENDOR_ID, HP_LD381GC_PRODUCT_ID) },
{ USB_DEVICE(HP_VENDOR_ID, HP_LD960_PRODUCT_ID) },
{ USB_DEVICE(HP_VENDOR_ID, HP_LD960TA_PRODUCT_ID) },
{ USB_DEVICE(HP_VENDOR_ID, HP_LCM220_PRODUCT_ID) },
{ USB_DEVICE(HP_VENDOR_ID, HP_LCM960_PRODUCT_ID) },
{ USB_DEVICE(HP_VENDOR_ID, HP_LM920_PRODUCT_ID) },
{ USB_DEVICE(HP_VENDOR_ID, HP_LM940_PRODUCT_ID) },
{ USB_DEVICE(HP_VENDOR_ID, HP_TD620_PRODUCT_ID) },
{ USB_DEVICE(CRESSI_VENDOR_ID, CRESSI_EDY_PRODUCT_ID) },
{ USB_DEVICE(ZEAGLE_VENDOR_ID, ZEAGLE_N2ITION3_PRODUCT_ID) },
{ USB_DEVICE(SONY_VENDOR_ID, SONY_QN3USB_PRODUCT_ID) },
{ USB_DEVICE(SANWA_VENDOR_ID, SANWA_PRODUCT_ID) },
{ USB_DEVICE(ADLINK_VENDOR_ID, ADLINK_ND6530_PRODUCT_ID) },
{ USB_DEVICE(ADLINK_VENDOR_ID, ADLINK_ND6530GC_PRODUCT_ID) },
{ USB_DEVICE(SMART_VENDOR_ID, SMART_PRODUCT_ID) },
{ USB_DEVICE(AT_VENDOR_ID, AT_VTKIT3_PRODUCT_ID) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, id_table);
#define SET_LINE_REQUEST_TYPE 0x21
#define SET_LINE_REQUEST 0x20
#define SET_CONTROL_REQUEST_TYPE 0x21
#define SET_CONTROL_REQUEST 0x22
#define CONTROL_DTR 0x01
#define CONTROL_RTS 0x02
#define BREAK_REQUEST_TYPE 0x21
#define BREAK_REQUEST 0x23
#define BREAK_ON 0xffff
#define BREAK_OFF 0x0000
#define GET_LINE_REQUEST_TYPE 0xa1
#define GET_LINE_REQUEST 0x21
#define VENDOR_WRITE_REQUEST_TYPE 0x40
#define VENDOR_WRITE_REQUEST 0x01
#define VENDOR_WRITE_NREQUEST 0x80
#define VENDOR_READ_REQUEST_TYPE 0xc0
#define VENDOR_READ_REQUEST 0x01
#define VENDOR_READ_NREQUEST 0x81
#define UART_STATE_INDEX 8
#define UART_STATE_MSR_MASK 0x8b
#define UART_STATE_TRANSIENT_MASK 0x74
#define UART_DCD 0x01
#define UART_DSR 0x02
#define UART_BREAK_ERROR 0x04
#define UART_RING 0x08
#define UART_FRAME_ERROR 0x10
#define UART_PARITY_ERROR 0x20
#define UART_OVERRUN_ERROR 0x40
#define UART_CTS 0x80
#define PL2303_FLOWCTRL_MASK 0xf0
#define PL2303_READ_TYPE_HX_STATUS 0x8080
#define PL2303_HXN_RESET_REG 0x07
#define PL2303_HXN_RESET_UPSTREAM_PIPE 0x02
#define PL2303_HXN_RESET_DOWNSTREAM_PIPE 0x01
#define PL2303_HXN_FLOWCTRL_REG 0x0a
#define PL2303_HXN_FLOWCTRL_MASK 0x1c
#define PL2303_HXN_FLOWCTRL_NONE 0x1c
#define PL2303_HXN_FLOWCTRL_RTS_CTS 0x18
#define PL2303_HXN_FLOWCTRL_XON_XOFF 0x0c
static void pl2303_set_break(struct usb_serial_port *port, bool enable);
enum pl2303_type {
TYPE_H,
TYPE_HX,
TYPE_TA,
TYPE_TB,
TYPE_HXD,
TYPE_HXN,
TYPE_COUNT
};
struct pl2303_type_data {
const char *name;
speed_t max_baud_rate;
unsigned long quirks;
unsigned int no_autoxonxoff:1;
unsigned int no_divisors:1;
unsigned int alt_divisors:1;
};
struct pl2303_serial_private {
const struct pl2303_type_data *type;
unsigned long quirks;
};
struct pl2303_private {
spinlock_t lock;
u8 line_control;
u8 line_status;
u8 line_settings[7];
};
static const struct pl2303_type_data pl2303_type_data[TYPE_COUNT] = {
[TYPE_H] = {
.name = "H",
.max_baud_rate = 1228800,
.quirks = PL2303_QUIRK_LEGACY,
.no_autoxonxoff = true,
},
[TYPE_HX] = {
.name = "HX",
.max_baud_rate = 6000000,
},
[TYPE_TA] = {
.name = "TA",
.max_baud_rate = 6000000,
.alt_divisors = true,
},
[TYPE_TB] = {
.name = "TB",
.max_baud_rate = 12000000,
.alt_divisors = true,
},
[TYPE_HXD] = {
.name = "HXD",
.max_baud_rate = 12000000,
},
[TYPE_HXN] = {
.name = "G",
.max_baud_rate = 12000000,
.no_divisors = true,
},
};
static int pl2303_vendor_read(struct usb_serial *serial, u16 value,
unsigned char buf[1])
{
struct pl2303_serial_private *spriv = usb_get_serial_data(serial);
struct device *dev = &serial->interface->dev;
u8 request;
int res;
if (spriv->type == &pl2303_type_data[TYPE_HXN])
request = VENDOR_READ_NREQUEST;
else
request = VENDOR_READ_REQUEST;
res = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
request, VENDOR_READ_REQUEST_TYPE,
value, 0, buf, 1, 100);
if (res != 1) {
dev_err(dev, "%s - failed to read [%04x]: %d\n", __func__,
value, res);
if (res >= 0)
res = -EIO;
return res;
}
dev_dbg(dev, "%s - [%04x] = %02x\n", __func__, value, buf[0]);
return 0;
}
static int pl2303_vendor_write(struct usb_serial *serial, u16 value, u16 index)
{
struct pl2303_serial_private *spriv = usb_get_serial_data(serial);
struct device *dev = &serial->interface->dev;
u8 request;
int res;
dev_dbg(dev, "%s - [%04x] = %02x\n", __func__, value, index);
if (spriv->type == &pl2303_type_data[TYPE_HXN])
request = VENDOR_WRITE_NREQUEST;
else
request = VENDOR_WRITE_REQUEST;
res = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
request, VENDOR_WRITE_REQUEST_TYPE,
value, index, NULL, 0, 100);
if (res) {
dev_err(dev, "%s - failed to write [%04x]: %d\n", __func__,
value, res);
return res;
}
return 0;
}
static int pl2303_update_reg(struct usb_serial *serial, u8 reg, u8 mask, u8 val)
{
struct pl2303_serial_private *spriv = usb_get_serial_data(serial);
int ret = 0;
u8 *buf;
buf = kmalloc(1, GFP_KERNEL);
if (!buf)
return -ENOMEM;
if (spriv->type == &pl2303_type_data[TYPE_HXN])
ret = pl2303_vendor_read(serial, reg, buf);
else
ret = pl2303_vendor_read(serial, reg | 0x80, buf);
if (ret)
goto out_free;
*buf &= ~mask;
*buf |= val & mask;
ret = pl2303_vendor_write(serial, reg, *buf);
out_free:
kfree(buf);
return ret;
}
static int pl2303_probe(struct usb_serial *serial,
const struct usb_device_id *id)
{
usb_set_serial_data(serial, (void *)id->driver_info);
return 0;
}
/*
* Use interrupt endpoint from first interface if available.
*
* This is needed due to the looney way its endpoints are set up.
*/
static int pl2303_endpoint_hack(struct usb_serial *serial,
struct usb_serial_endpoints *epds)
{
struct usb_interface *interface = serial->interface;
struct usb_device *dev = serial->dev;
struct device *ddev = &interface->dev;
struct usb_host_interface *iface_desc;
struct usb_endpoint_descriptor *endpoint;
unsigned int i;
if (interface == dev->actconfig->interface[0])
return 0;
/* check out the endpoints of the other interface */
iface_desc = dev->actconfig->interface[0]->cur_altsetting;
for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
endpoint = &iface_desc->endpoint[i].desc;
if (!usb_endpoint_is_int_in(endpoint))
continue;
dev_dbg(ddev, "found interrupt in on separate interface\n");
if (epds->num_interrupt_in < ARRAY_SIZE(epds->interrupt_in))
epds->interrupt_in[epds->num_interrupt_in++] = endpoint;
}
return 0;
}
static int pl2303_calc_num_ports(struct usb_serial *serial,
struct usb_serial_endpoints *epds)
{
unsigned long quirks = (unsigned long)usb_get_serial_data(serial);
struct device *dev = &serial->interface->dev;
int ret;
if (quirks & PL2303_QUIRK_ENDPOINT_HACK) {
ret = pl2303_endpoint_hack(serial, epds);
if (ret)
return ret;
}
if (epds->num_interrupt_in < 1) {
dev_err(dev, "required interrupt-in endpoint missing\n");
return -ENODEV;
}
return 1;
}
static bool pl2303_supports_hx_status(struct usb_serial *serial)
{
int ret;
u8 buf;
ret = usb_control_msg_recv(serial->dev, 0, VENDOR_READ_REQUEST,
VENDOR_READ_REQUEST_TYPE, PL2303_READ_TYPE_HX_STATUS,
0, &buf, 1, 100, GFP_KERNEL);
return ret == 0;
}
static int pl2303_detect_type(struct usb_serial *serial)
{
struct usb_device_descriptor *desc = &serial->dev->descriptor;
u16 bcdDevice, bcdUSB;
/*
* Legacy PL2303H, variants 0 and 1 (difference unknown).
*/
if (desc->bDeviceClass == 0x02)
return TYPE_H; /* variant 0 */
if (desc->bMaxPacketSize0 != 0x40) {
if (desc->bDeviceClass == 0x00 || desc->bDeviceClass == 0xff)
return TYPE_H; /* variant 1 */
return TYPE_H; /* variant 0 */
}
bcdDevice = le16_to_cpu(desc->bcdDevice);
bcdUSB = le16_to_cpu(desc->bcdUSB);
switch (bcdUSB) {
case 0x110:
switch (bcdDevice) {
case 0x300:
return TYPE_HX;
case 0x400:
return TYPE_HXD;
default:
return TYPE_HX;
}
break;
case 0x200:
switch (bcdDevice) {
case 0x100:
case 0x305:
/*
* Assume it's an HXN-type if the device doesn't
* support the old read request value.
*/
if (!pl2303_supports_hx_status(serial))
return TYPE_HXN;
break;
case 0x300:
return TYPE_TA;
case 0x500:
return TYPE_TB;
}
break;
}
dev_err(&serial->interface->dev,
"unknown device type, please report to linux-usb@vger.kernel.org\n");
return -ENODEV;
}
static int pl2303_startup(struct usb_serial *serial)
{
struct pl2303_serial_private *spriv;
enum pl2303_type type;
unsigned char *buf;
int ret;
ret = pl2303_detect_type(serial);
if (ret < 0)
return ret;
type = ret;
dev_dbg(&serial->interface->dev, "device type: %s\n", pl2303_type_data[type].name);
spriv = kzalloc(sizeof(*spriv), GFP_KERNEL);
if (!spriv)
return -ENOMEM;
spriv->type = &pl2303_type_data[type];
spriv->quirks = (unsigned long)usb_get_serial_data(serial);
spriv->quirks |= spriv->type->quirks;
usb_set_serial_data(serial, spriv);
if (type != TYPE_HXN) {
buf = kmalloc(1, GFP_KERNEL);
if (!buf) {
kfree(spriv);
return -ENOMEM;
}
pl2303_vendor_read(serial, 0x8484, buf);
pl2303_vendor_write(serial, 0x0404, 0);
pl2303_vendor_read(serial, 0x8484, buf);
pl2303_vendor_read(serial, 0x8383, buf);
pl2303_vendor_read(serial, 0x8484, buf);
pl2303_vendor_write(serial, 0x0404, 1);
pl2303_vendor_read(serial, 0x8484, buf);
pl2303_vendor_read(serial, 0x8383, buf);
pl2303_vendor_write(serial, 0, 1);
pl2303_vendor_write(serial, 1, 0);
if (spriv->quirks & PL2303_QUIRK_LEGACY)
pl2303_vendor_write(serial, 2, 0x24);
else
pl2303_vendor_write(serial, 2, 0x44);
kfree(buf);
}
return 0;
}
static void pl2303_release(struct usb_serial *serial)
{
struct pl2303_serial_private *spriv = usb_get_serial_data(serial);
kfree(spriv);
}
static int pl2303_port_probe(struct usb_serial_port *port)
{
struct pl2303_private *priv;
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
spin_lock_init(&priv->lock);
usb_set_serial_port_data(port, priv);
port->port.drain_delay = 256;
return 0;
}
static void pl2303_port_remove(struct usb_serial_port *port)
{
struct pl2303_private *priv = usb_get_serial_port_data(port);
kfree(priv);
}
static int pl2303_set_control_lines(struct usb_serial_port *port, u8 value)
{
struct usb_device *dev = port->serial->dev;
int retval;
dev_dbg(&port->dev, "%s - %02x\n", __func__, value);
retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
SET_CONTROL_REQUEST, SET_CONTROL_REQUEST_TYPE,
value, 0, NULL, 0, 100);
if (retval)
dev_err(&port->dev, "%s - failed: %d\n", __func__, retval);
return retval;
}
/*
* Returns the nearest supported baud rate that can be set directly without
* using divisors.
*/
static speed_t pl2303_get_supported_baud_rate(speed_t baud)
{
static const speed_t baud_sup[] = {
75, 150, 300, 600, 1200, 1800, 2400, 3600, 4800, 7200, 9600,
14400, 19200, 28800, 38400, 57600, 115200, 230400, 460800,
614400, 921600, 1228800, 2457600, 3000000, 6000000
};
unsigned i;
for (i = 0; i < ARRAY_SIZE(baud_sup); ++i) {
if (baud_sup[i] > baud)
break;
}
if (i == ARRAY_SIZE(baud_sup))
baud = baud_sup[i - 1];
else if (i > 0 && (baud_sup[i] - baud) > (baud - baud_sup[i - 1]))
baud = baud_sup[i - 1];
else
baud = baud_sup[i];
return baud;
}
/*
* NOTE: If unsupported baud rates are set directly, the PL2303 seems to
* use 9600 baud.
*/
static speed_t pl2303_encode_baud_rate_direct(unsigned char buf[4],
speed_t baud)
{
put_unaligned_le32(baud, buf);
return baud;
}
static speed_t pl2303_encode_baud_rate_divisor(unsigned char buf[4],
speed_t baud)
{
unsigned int baseline, mantissa, exponent;
/*
* Apparently the formula is:
* baudrate = 12M * 32 / (mantissa * 4^exponent)
* where
* mantissa = buf[8:0]
* exponent = buf[11:9]
*/
baseline = 12000000 * 32;
mantissa = baseline / baud;
if (mantissa == 0)
mantissa = 1; /* Avoid dividing by zero if baud > 32*12M. */
exponent = 0;
while (mantissa >= 512) {
if (exponent < 7) {
mantissa >>= 2; /* divide by 4 */
exponent++;
} else {
/* Exponent is maxed. Trim mantissa and leave. */
mantissa = 511;
break;
}
}
buf[3] = 0x80;
buf[2] = 0;
buf[1] = exponent << 1 | mantissa >> 8;
buf[0] = mantissa & 0xff;
/* Calculate and return the exact baud rate. */
baud = (baseline / mantissa) >> (exponent << 1);
return baud;
}
static speed_t pl2303_encode_baud_rate_divisor_alt(unsigned char buf[4],
speed_t baud)
{
unsigned int baseline, mantissa, exponent;
/*
* Apparently, for the TA version the formula is:
* baudrate = 12M * 32 / (mantissa * 2^exponent)
* where
* mantissa = buf[10:0]
* exponent = buf[15:13 16]
*/
baseline = 12000000 * 32;
mantissa = baseline / baud;
if (mantissa == 0)
mantissa = 1; /* Avoid dividing by zero if baud > 32*12M. */
exponent = 0;
while (mantissa >= 2048) {
if (exponent < 15) {
mantissa >>= 1; /* divide by 2 */
exponent++;
} else {
/* Exponent is maxed. Trim mantissa and leave. */
mantissa = 2047;
break;
}
}
buf[3] = 0x80;
buf[2] = exponent & 0x01;
buf[1] = (exponent & ~0x01) << 4 | mantissa >> 8;
buf[0] = mantissa & 0xff;
/* Calculate and return the exact baud rate. */
baud = (baseline / mantissa) >> exponent;
return baud;
}
static void pl2303_encode_baud_rate(struct tty_struct *tty,
struct usb_serial_port *port,
u8 buf[4])
{
struct usb_serial *serial = port->serial;
struct pl2303_serial_private *spriv = usb_get_serial_data(serial);
speed_t baud_sup;
speed_t baud;
baud = tty_get_baud_rate(tty);
dev_dbg(&port->dev, "baud requested = %u\n", baud);
if (!baud)
return;
if (spriv->type->max_baud_rate)
baud = min_t(speed_t, baud, spriv->type->max_baud_rate);
/*
* Use direct method for supported baud rates, otherwise use divisors.
* Newer chip types do not support divisor encoding.
*/
if (spriv->type->no_divisors)
baud_sup = baud;
else
baud_sup = pl2303_get_supported_baud_rate(baud);
if (baud == baud_sup)
baud = pl2303_encode_baud_rate_direct(buf, baud);
else if (spriv->type->alt_divisors)
baud = pl2303_encode_baud_rate_divisor_alt(buf, baud);
else
baud = pl2303_encode_baud_rate_divisor(buf, baud);
/* Save resulting baud rate */
tty_encode_baud_rate(tty, baud, baud);
dev_dbg(&port->dev, "baud set = %u\n", baud);
}
static int pl2303_get_line_request(struct usb_serial_port *port,
unsigned char buf[7])
{
struct usb_device *udev = port->serial->dev;
int ret;
ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
GET_LINE_REQUEST, GET_LINE_REQUEST_TYPE,
0, 0, buf, 7, 100);
if (ret != 7) {
dev_err(&port->dev, "%s - failed: %d\n", __func__, ret);
if (ret >= 0)
ret = -EIO;
return ret;
}
dev_dbg(&port->dev, "%s - %7ph\n", __func__, buf);
return 0;
}
static int pl2303_set_line_request(struct usb_serial_port *port,
unsigned char buf[7])
{
struct usb_device *udev = port->serial->dev;
int ret;
ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
SET_LINE_REQUEST, SET_LINE_REQUEST_TYPE,
0, 0, buf, 7, 100);
if (ret < 0) {
dev_err(&port->dev, "%s - failed: %d\n", __func__, ret);
return ret;
}
dev_dbg(&port->dev, "%s - %7ph\n", __func__, buf);
return 0;
}
static bool pl2303_termios_change(const struct ktermios *a, const struct ktermios *b)
{
bool ixon_change;
ixon_change = ((a->c_iflag ^ b->c_iflag) & (IXON | IXANY)) ||
a->c_cc[VSTART] != b->c_cc[VSTART] ||
a->c_cc[VSTOP] != b->c_cc[VSTOP];
return tty_termios_hw_change(a, b) || ixon_change;
}
static bool pl2303_enable_xonxoff(struct tty_struct *tty, const struct pl2303_type_data *type)
{
if (!I_IXON(tty) || I_IXANY(tty))
return false;
if (START_CHAR(tty) != 0x11 || STOP_CHAR(tty) != 0x13)
return false;
if (type->no_autoxonxoff)
return false;
return true;
}
static void pl2303_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old_termios)
{
struct usb_serial *serial = port->serial;
struct pl2303_serial_private *spriv = usb_get_serial_data(serial);
struct pl2303_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
unsigned char *buf;
int ret;
u8 control;
if (old_termios && !pl2303_termios_change(&tty->termios, old_termios))
return;
buf = kzalloc(7, GFP_KERNEL);
if (!buf) {
/* Report back no change occurred */
if (old_termios)
tty->termios = *old_termios;
return;
}
pl2303_get_line_request(port, buf);
switch (C_CSIZE(tty)) {
case CS5:
buf[6] = 5;
break;
case CS6:
buf[6] = 6;
break;
case CS7:
buf[6] = 7;
break;
default:
case CS8:
buf[6] = 8;
}
dev_dbg(&port->dev, "data bits = %d\n", buf[6]);
/* For reference buf[0]:buf[3] baud rate value */
pl2303_encode_baud_rate(tty, port, &buf[0]);
/* For reference buf[4]=0 is 1 stop bits */
/* For reference buf[4]=1 is 1.5 stop bits */
/* For reference buf[4]=2 is 2 stop bits */
if (C_CSTOPB(tty)) {
/*
* NOTE: Comply with "real" UARTs / RS232:
* use 1.5 instead of 2 stop bits with 5 data bits
*/
if (C_CSIZE(tty) == CS5) {
buf[4] = 1;
dev_dbg(&port->dev, "stop bits = 1.5\n");
} else {
buf[4] = 2;
dev_dbg(&port->dev, "stop bits = 2\n");
}
} else {
buf[4] = 0;
dev_dbg(&port->dev, "stop bits = 1\n");
}
if (C_PARENB(tty)) {
/* For reference buf[5]=0 is none parity */
/* For reference buf[5]=1 is odd parity */
/* For reference buf[5]=2 is even parity */
/* For reference buf[5]=3 is mark parity */
/* For reference buf[5]=4 is space parity */
if (C_PARODD(tty)) {
if (C_CMSPAR(tty)) {
buf[5] = 3;
dev_dbg(&port->dev, "parity = mark\n");
} else {
buf[5] = 1;
dev_dbg(&port->dev, "parity = odd\n");
}
} else {
if (C_CMSPAR(tty)) {
buf[5] = 4;
dev_dbg(&port->dev, "parity = space\n");
} else {
buf[5] = 2;
dev_dbg(&port->dev, "parity = even\n");
}
}
} else {
buf[5] = 0;
dev_dbg(&port->dev, "parity = none\n");
}
/*
* Some PL2303 are known to lose bytes if you change serial settings
* even to the same values as before. Thus we actually need to filter
* in this specific case.
*
* Note that the tty_termios_hw_change check above is not sufficient
* as a previously requested baud rate may differ from the one
* actually used (and stored in old_termios).
*
* NOTE: No additional locking needed for line_settings as it is
* only used in set_termios, which is serialised against itself.
*/
if (!old_termios || memcmp(buf, priv->line_settings, 7)) {
ret = pl2303_set_line_request(port, buf);
if (!ret)
memcpy(priv->line_settings, buf, 7);
}
/* change control lines if we are switching to or from B0 */
spin_lock_irqsave(&priv->lock, flags);
control = priv->line_control;
if (C_BAUD(tty) == B0)
priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
else if (old_termios && (old_termios->c_cflag & CBAUD) == B0)
priv->line_control |= (CONTROL_DTR | CONTROL_RTS);
if (control != priv->line_control) {
control = priv->line_control;
spin_unlock_irqrestore(&priv->lock, flags);
pl2303_set_control_lines(port, control);
} else {
spin_unlock_irqrestore(&priv->lock, flags);
}
if (C_CRTSCTS(tty)) {
if (spriv->quirks & PL2303_QUIRK_LEGACY) {
pl2303_update_reg(serial, 0, PL2303_FLOWCTRL_MASK, 0x40);
} else if (spriv->type == &pl2303_type_data[TYPE_HXN]) {
pl2303_update_reg(serial, PL2303_HXN_FLOWCTRL_REG,
PL2303_HXN_FLOWCTRL_MASK,
PL2303_HXN_FLOWCTRL_RTS_CTS);
} else {
pl2303_update_reg(serial, 0, PL2303_FLOWCTRL_MASK, 0x60);
}
} else if (pl2303_enable_xonxoff(tty, spriv->type)) {
if (spriv->type == &pl2303_type_data[TYPE_HXN]) {
pl2303_update_reg(serial, PL2303_HXN_FLOWCTRL_REG,
PL2303_HXN_FLOWCTRL_MASK,
PL2303_HXN_FLOWCTRL_XON_XOFF);
} else {
pl2303_update_reg(serial, 0, PL2303_FLOWCTRL_MASK, 0xc0);
}
} else {
if (spriv->type == &pl2303_type_data[TYPE_HXN]) {
pl2303_update_reg(serial, PL2303_HXN_FLOWCTRL_REG,
PL2303_HXN_FLOWCTRL_MASK,
PL2303_HXN_FLOWCTRL_NONE);
} else {
pl2303_update_reg(serial, 0, PL2303_FLOWCTRL_MASK, 0);
}
}
kfree(buf);
}
static void pl2303_dtr_rts(struct usb_serial_port *port, int on)
{
struct pl2303_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
u8 control;
spin_lock_irqsave(&priv->lock, flags);
if (on)
priv->line_control |= (CONTROL_DTR | CONTROL_RTS);
else
priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
control = priv->line_control;
spin_unlock_irqrestore(&priv->lock, flags);
pl2303_set_control_lines(port, control);
}
static void pl2303_close(struct usb_serial_port *port)
{
usb_serial_generic_close(port);
usb_kill_urb(port->interrupt_in_urb);
pl2303_set_break(port, false);
}
static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port)
{
struct usb_serial *serial = port->serial;
struct pl2303_serial_private *spriv = usb_get_serial_data(serial);
int result;
if (spriv->quirks & PL2303_QUIRK_LEGACY) {
usb_clear_halt(serial->dev, port->write_urb->pipe);
usb_clear_halt(serial->dev, port->read_urb->pipe);
} else {
/* reset upstream data pipes */
if (spriv->type == &pl2303_type_data[TYPE_HXN]) {
pl2303_vendor_write(serial, PL2303_HXN_RESET_REG,
PL2303_HXN_RESET_UPSTREAM_PIPE |
PL2303_HXN_RESET_DOWNSTREAM_PIPE);
} else {
pl2303_vendor_write(serial, 8, 0);
pl2303_vendor_write(serial, 9, 0);
}
}
/* Setup termios */
if (tty)
pl2303_set_termios(tty, port, NULL);
result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
if (result) {
dev_err(&port->dev, "failed to submit interrupt urb: %d\n",
result);
return result;
}
result = usb_serial_generic_open(tty, port);
if (result) {
usb_kill_urb(port->interrupt_in_urb);
return result;
}
return 0;
}
static int pl2303_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear)
{