stmmac_platform.c

// SPDX-License-Identifier: GPL-2.0-only
/*******************************************************************************
  This contains the functions to handle the platform driver.

  Copyright (C) 2007-2011  STMicroelectronics Ltd


  Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
*******************************************************************************/

#include <linux/platform_device.h>
#include <linux/module.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_net.h>
#include <linux/of_device.h>
#include <linux/of_mdio.h>

#include "stmmac.h"
#include "stmmac_platform.h"

#ifdef CONFIG_OF

/**
 * dwmac1000_validate_mcast_bins - validates the number of Multicast filter bins
 * @dev: struct device of the platform device
 * @mcast_bins: Multicast filtering bins
 * Description:
 * this function validates the number of Multicast filtering bins specified
 * by the configuration through the device tree. The Synopsys GMAC supports
 * 64 bins, 128 bins, or 256 bins. "bins" refer to the division of CRC
 * number space. 64 bins correspond to 6 bits of the CRC, 128 corresponds
 * to 7 bits, and 256 refers to 8 bits of the CRC. Any other setting is
 * invalid and will cause the filtering algorithm to use Multicast
 * promiscuous mode.
 */
static int dwmac1000_validate_mcast_bins(struct device *dev, int mcast_bins)
{
	int x = mcast_bins;

	switch (x) {
	case HASH_TABLE_SIZE:
	case 128:
	case 256:
		break;
	default:
		x = 0;
		dev_info(dev, "Hash table entries set to unexpected value %d\n",
			 mcast_bins);
		break;
	}
	return x;
}

/**
 * dwmac1000_validate_ucast_entries - validate the Unicast address entries
 * @dev: struct device of the platform device
 * @ucast_entries: number of Unicast address entries
 * Description:
 * This function validates the number of Unicast address entries supported
 * by a particular Synopsys 10/100/1000 controller. The Synopsys controller
 * supports 1..32, 64, or 128 Unicast filter entries for it's Unicast filter
 * logic. This function validates a valid, supported configuration is
 * selected, and defaults to 1 Unicast address if an unsupported
 * configuration is selected.
 */
static int dwmac1000_validate_ucast_entries(struct device *dev,
					    int ucast_entries)
{
	int x = ucast_entries;

	switch (x) {
	case 1 ... 32:
	case 64:
	case 128:
		break;
	default:
		x = 1;
		dev_info(dev, "Unicast table entries set to unexpected value %d\n",
			 ucast_entries);
		break;
	}
	return x;
}

/**
 * stmmac_axi_setup - parse DT parameters for programming the AXI register
 * @pdev: platform device
 * Description:
 * if required, from device-tree the AXI internal register can be tuned
 * by using platform parameters.
 */
static struct stmmac_axi *stmmac_axi_setup(struct platform_device *pdev)
{
	struct device_node *np;
	struct stmmac_axi *axi;

	np = of_parse_phandle(pdev->dev.of_node, "snps,axi-config", 0);
	if (!np)
		return NULL;

	axi = devm_kzalloc(&pdev->dev, sizeof(*axi), GFP_KERNEL);
	if (!axi) {
		of_node_put(np);
		return ERR_PTR(-ENOMEM);
	}

	axi->axi_lpi_en = of_property_read_bool(np, "snps,lpi_en");
	axi->axi_xit_frm = of_property_read_bool(np, "snps,xit_frm");
	axi->axi_kbbe = of_property_read_bool(np, "snps,axi_kbbe");
	axi->axi_fb = of_property_read_bool(np, "snps,axi_fb");
	axi->axi_mb = of_property_read_bool(np, "snps,axi_mb");
	axi->axi_rb =  of_property_read_bool(np, "snps,axi_rb");

	if (of_property_read_u32(np, "snps,wr_osr_lmt", &axi->axi_wr_osr_lmt))
		axi->axi_wr_osr_lmt = 1;
	if (of_property_read_u32(np, "snps,rd_osr_lmt", &axi->axi_rd_osr_lmt))
		axi->axi_rd_osr_lmt = 1;
	of_property_read_u32_array(np, "snps,blen", axi->axi_blen, AXI_BLEN);
	of_node_put(np);

	return axi;
}

/**
 * stmmac_mtl_setup - parse DT parameters for multiple queues configuration
 * @pdev: platform device
 * @plat: enet data
 */
static int stmmac_mtl_setup(struct platform_device *pdev,
			    struct plat_stmmacenet_data *plat)
{
	struct device_node *q_node;
	struct device_node *rx_node;
	struct device_node *tx_node;
	u8 queue = 0;
	int ret = 0;

	/* For backwards-compatibility with device trees that don't have any
	 * snps,mtl-rx-config or snps,mtl-tx-config properties, we fall back
	 * to one RX and TX queues each.
	 */
	plat->rx_queues_to_use = 1;
	plat->tx_queues_to_use = 1;

	/* First Queue must always be in DCB mode. As MTL_QUEUE_DCB = 1 we need
	 * to always set this, otherwise Queue will be classified as AVB
	 * (because MTL_QUEUE_AVB = 0).
	 */
	plat->rx_queues_cfg[0].mode_to_use = MTL_QUEUE_DCB;
	plat->tx_queues_cfg[0].mode_to_use = MTL_QUEUE_DCB;

	rx_node = of_parse_phandle(pdev->dev.of_node, "snps,mtl-rx-config", 0);
	if (!rx_node)
		return ret;

	tx_node = of_parse_phandle(pdev->dev.of_node, "snps,mtl-tx-config", 0);
	if (!tx_node) {
		of_node_put(rx_node);
		return ret;
	}

	/* Processing RX queues common config */
	if (of_property_read_u32(rx_node, "snps,rx-queues-to-use",
				 &plat->rx_queues_to_use))
		plat->rx_queues_to_use = 1;

	if (of_property_read_bool(rx_node, "snps,rx-sched-sp"))
		plat->rx_sched_algorithm = MTL_RX_ALGORITHM_SP;
	else if (of_property_read_bool(rx_node, "snps,rx-sched-wsp"))
		plat->rx_sched_algorithm = MTL_RX_ALGORITHM_WSP;
	else
		plat->rx_sched_algorithm = MTL_RX_ALGORITHM_SP;

	/* Processing individual RX queue config */
	for_each_child_of_node(rx_node, q_node) {
		if (queue >= plat->rx_queues_to_use)
			break;

		if (of_property_read_bool(q_node, "snps,dcb-algorithm"))
			plat->rx_queues_cfg[queue].mode_to_use = MTL_QUEUE_DCB;
		else if (of_property_read_bool(q_node, "snps,avb-algorithm"))
			plat->rx_queues_cfg[queue].mode_to_use = MTL_QUEUE_AVB;
		else
			plat->rx_queues_cfg[queue].mode_to_use = MTL_QUEUE_DCB;

		if (of_property_read_u32(q_node, "snps,map-to-dma-channel",
					 &plat->rx_queues_cfg[queue].chan))
			plat->rx_queues_cfg[queue].chan = queue;
		/* TODO: Dynamic mapping to be included in the future */

		if (of_property_read_u32(q_node, "snps,priority",
					&plat->rx_queues_cfg[queue].prio)) {
			plat->rx_queues_cfg[queue].prio = 0;
			plat->rx_queues_cfg[queue].use_prio = false;
		} else {
			plat->rx_queues_cfg[queue].use_prio = true;
		}

		/* RX queue specific packet type routing */
		if (of_property_read_bool(q_node, "snps,route-avcp"))
			plat->rx_queues_cfg[queue].pkt_route = PACKET_AVCPQ;
		else if (of_property_read_bool(q_node, "snps,route-ptp"))
			plat->rx_queues_cfg[queue].pkt_route = PACKET_PTPQ;
		else if (of_property_read_bool(q_node, "snps,route-dcbcp"))
			plat->rx_queues_cfg[queue].pkt_route = PACKET_DCBCPQ;
		else if (of_property_read_bool(q_node, "snps,route-up"))
			plat->rx_queues_cfg[queue].pkt_route = PACKET_UPQ;
		else if (of_property_read_bool(q_node, "snps,route-multi-broad"))
			plat->rx_queues_cfg[queue].pkt_route = PACKET_MCBCQ;
		else
			plat->rx_queues_cfg[queue].pkt_route = 0x0;

		queue++;
	}
	if (queue != plat->rx_queues_to_use) {
		ret = -EINVAL;
		dev_err(&pdev->dev, "Not all RX queues were configured\n");
		goto out;
	}

	/* Processing TX queues common config */
	if (of_property_read_u32(tx_node, "snps,tx-queues-to-use",
				 &plat->tx_queues_to_use))
		plat->tx_queues_to_use = 1;

	if (of_property_read_bool(tx_node, "snps,tx-sched-wrr"))
		plat->tx_sched_algorithm = MTL_TX_ALGORITHM_WRR;
	else if (of_property_read_bool(tx_node, "snps,tx-sched-wfq"))
		plat->tx_sched_algorithm = MTL_TX_ALGORITHM_WFQ;
	else if (of_property_read_bool(tx_node, "snps,tx-sched-dwrr"))
		plat->tx_sched_algorithm = MTL_TX_ALGORITHM_DWRR;
	else if (of_property_read_bool(tx_node, "snps,tx-sched-sp"))
		plat->tx_sched_algorithm = MTL_TX_ALGORITHM_SP;
	else
		plat->tx_sched_algorithm = MTL_TX_ALGORITHM_SP;

	queue = 0;

	/* Processing individual TX queue config */
	for_each_child_of_node(tx_node, q_node) {
		if (queue >= plat->tx_queues_to_use)
			break;

		if (of_property_read_u32(q_node, "snps,weight",
					 &plat->tx_queues_cfg[queue].weight))
			plat->tx_queues_cfg[queue].weight = 0x10 + queue;

		if (of_property_read_bool(q_node, "snps,dcb-algorithm")) {
			plat->tx_queues_cfg[queue].mode_to_use = MTL_QUEUE_DCB;
		} else if (of_property_read_bool(q_node,
						 "snps,avb-algorithm")) {
			plat->tx_queues_cfg[queue].mode_to_use = MTL_QUEUE_AVB;

			/* Credit Base Shaper parameters used by AVB */
			if (of_property_read_u32(q_node, "snps,send_slope",
				&plat->tx_queues_cfg[queue].send_slope))
				plat->tx_queues_cfg[queue].send_slope = 0x0;
			if (of_property_read_u32(q_node, "snps,idle_slope",
				&plat->tx_queues_cfg[queue].idle_slope))
				plat->tx_queues_cfg[queue].idle_slope = 0x0;
			if (of_property_read_u32(q_node, "snps,high_credit",
				&plat->tx_queues_cfg[queue].high_credit))
				plat->tx_queues_cfg[queue].high_credit = 0x0;
			if (of_property_read_u32(q_node, "snps,low_credit",
				&plat->tx_queues_cfg[queue].low_credit))
				plat->tx_queues_cfg[queue].low_credit = 0x0;
		} else {
			plat->tx_queues_cfg[queue].mode_to_use = MTL_QUEUE_DCB;
		}

		if (of_property_read_u32(q_node, "snps,priority",
					&plat->tx_queues_cfg[queue].prio)) {
			plat->tx_queues_cfg[queue].prio = 0;
			plat->tx_queues_cfg[queue].use_prio = false;
		} else {
			plat->tx_queues_cfg[queue].use_prio = true;
		}

		queue++;
	}
	if (queue != plat->tx_queues_to_use) {
		ret = -EINVAL;
		dev_err(&pdev->dev, "Not all TX queues were configured\n");
		goto out;
	}

out:
	of_node_put(rx_node);
	of_node_put(tx_node);
	of_node_put(q_node);

	return ret;
}

/**
 * stmmac_dt_phy - parse device-tree driver parameters to allocate PHY resources
 * @plat: driver data platform structure
 * @np: device tree node
 * @dev: device pointer
 * Description:
 * The mdio bus will be allocated in case of a phy transceiver is on board;
 * it will be NULL if the fixed-link is configured.
 * If there is the "snps,dwmac-mdio" sub-node the mdio will be allocated
 * in any case (for DSA, mdio must be registered even if fixed-link).
 * The table below sums the supported configurations:
 *	-------------------------------
 *	snps,phy-addr	|     Y
 *	-------------------------------
 *	phy-handle	|     Y
 *	-------------------------------
 *	fixed-link	|     N
 *	-------------------------------
 *	snps,dwmac-mdio	|
 *	  even if	|     Y
 *	fixed-link	|
 *	-------------------------------
 *
 * It returns 0 in case of success otherwise -ENODEV.
 */
static int stmmac_dt_phy(struct plat_stmmacenet_data *plat,
			 struct device_node *np, struct device *dev)
{
	bool mdio = !of_phy_is_fixed_link(np);
	static const struct of_device_id need_mdio_ids[] = {
		{ .compatible = "snps,dwc-qos-ethernet-4.10" },
		{},
	};

	if (of_match_node(need_mdio_ids, np)) {
		plat->mdio_node = of_get_child_by_name(np, "mdio");
	} else {
		/**
		 * If snps,dwmac-mdio is passed from DT, always register
		 * the MDIO
		 */
		for_each_child_of_node(np, plat->mdio_node) {
			if (of_device_is_compatible(plat->mdio_node,
						    "snps,dwmac-mdio"))
				break;
		}
	}

	if (plat->mdio_node) {
		dev_dbg(dev, "Found MDIO subnode\n");
		mdio = true;
	}

	if (mdio) {
		plat->mdio_bus_data =
			devm_kzalloc(dev, sizeof(struct stmmac_mdio_bus_data),
				     GFP_KERNEL);
		if (!plat->mdio_bus_data)
			return -ENOMEM;

		plat->mdio_bus_data->needs_reset = true;
	}

	return 0;
}

/**
 * stmmac_of_get_mac_mode - retrieves the interface of the MAC
 * @np: - device-tree node
 * Description:
 * Similar to `of_get_phy_mode()`, this function will retrieve (from
 * the device-tree) the interface mode on the MAC side. This assumes
 * that there is mode converter in-between the MAC & PHY
 * (e.g. GMII-to-RGMII).
 */
static int stmmac_of_get_mac_mode(struct device_node *np)
{
	const char *pm;
	int err, i;

	err = of_property_read_string(np, "mac-mode", &pm);
	if (err < 0)
		return err;

	for (i = 0; i < PHY_INTERFACE_MODE_MAX; i++) {
		if (!strcasecmp(pm, phy_modes(i)))
			return i;
	}

	return -ENODEV;
}

/**
 * stmmac_probe_config_dt - parse device-tree driver parameters
 * @pdev: platform_device structure
 * @mac: MAC address to use
 * Description:
 * this function is to read the driver parameters from device-tree and
 * set some private fields that will be used by the main at runtime.
 */
struct plat_stmmacenet_data *
stmmac_probe_config_dt(struct platform_device *pdev, const char **mac)
{
	struct device_node *np = pdev->dev.of_node;
	struct plat_stmmacenet_data *plat;
	struct stmmac_dma_cfg *dma_cfg;
	int phy_mode;
	int rc;

	plat = devm_kzalloc(&pdev->dev, sizeof(*plat), GFP_KERNEL);
	if (!plat)
		return ERR_PTR(-ENOMEM);

	*mac = of_get_mac_address(np);
	if (IS_ERR(*mac)) {
		if (PTR_ERR(*mac) == -EPROBE_DEFER)
			return ERR_CAST(*mac);

		*mac = NULL;
	}

	phy_mode = device_get_phy_mode(&pdev->dev);
	if (phy_mode < 0)
		return ERR_PTR(phy_mode);

	plat->phy_interface = phy_mode;
	plat->interface = stmmac_of_get_mac_mode(np);
	if (plat->interface < 0)
		plat->interface = plat->phy_interface;

	/* Some wrapper drivers still rely on phy_node. Let's save it while
	 * they are not converted to phylink. */
	plat->phy_node = of_parse_phandle(np, "phy-handle", 0);

	/* PHYLINK automatically parses the phy-handle property */
	plat->phylink_node = np;

	/* Get max speed of operation from device tree */
	if (of_property_read_u32(np, "max-speed", &plat->max_speed))
		plat->max_speed = -1;

	plat->bus_id = of_alias_get_id(np, "ethernet");
	if (plat->bus_id < 0)
		plat->bus_id = 0;

	/* Default to phy auto-detection */
	plat->phy_addr = -1;

	/* Default to get clk_csr from stmmac_clk_crs_set(),
	 * or get clk_csr from device tree.
	 */
	plat->clk_csr = -1;
	of_property_read_u32(np, "clk_csr", &plat->clk_csr);

	/* "snps,phy-addr" is not a standard property. Mark it as deprecated
	 * and warn of its use. Remove this when phy node support is added.
	 */
	if (of_property_read_u32(np, "snps,phy-addr", &plat->phy_addr) == 0)
		dev_warn(&pdev->dev, "snps,phy-addr property is deprecated\n");

	/* To Configure PHY by using all device-tree supported properties */
	rc = stmmac_dt_phy(plat, np, &pdev->dev);
	if (rc)
		return ERR_PTR(rc);

	of_property_read_u32(np, "tx-fifo-depth", &plat->tx_fifo_size);

	of_property_read_u32(np, "rx-fifo-depth", &plat->rx_fifo_size);

	plat->force_sf_dma_mode =
		of_property_read_bool(np, "snps,force_sf_dma_mode");

	plat->en_tx_lpi_clockgating =
		of_property_read_bool(np, "snps,en-tx-lpi-clockgating");

	/* Set the maxmtu to a default of JUMBO_LEN in case the
	 * parameter is not present in the device tree.
	 */
	plat->maxmtu = JUMBO_LEN;

	/* Set default value for multicast hash bins */
	plat->multicast_filter_bins = HASH_TABLE_SIZE;

	/* Set default value for unicast filter entries */
	plat->unicast_filter_entries = 1;

	/*
	 * Currently only the properties needed on SPEAr600
	 * are provided. All other properties should be added
	 * once needed on other platforms.
	 */
	if (of_device_is_compatible(np, "st,spear600-gmac") ||
		of_device_is_compatible(np, "snps,dwmac-3.50a") ||
		of_device_is_compatible(np, "snps,dwmac-3.70a") ||
		of_device_is_compatible(np, "snps,dwmac")) {
		/* Note that the max-frame-size parameter as defined in the
		 * ePAPR v1.1 spec is defined as max-frame-size, it's
		 * actually used as the IEEE definition of MAC Client
		 * data, or MTU. The ePAPR specification is confusing as
		 * the definition is max-frame-size, but usage examples
		 * are clearly MTUs
		 */
		of_property_read_u32(np, "max-frame-size", &plat->maxmtu);
		of_property_read_u32(np, "snps,multicast-filter-bins",
				     &plat->multicast_filter_bins);
		of_property_read_u32(np, "snps,perfect-filter-entries",
				     &plat->unicast_filter_entries);
		plat->unicast_filter_entries = dwmac1000_validate_ucast_entries(
				&pdev->dev, plat->unicast_filter_entries);
		plat->multicast_filter_bins = dwmac1000_validate_mcast_bins(
				&pdev->dev, plat->multicast_filter_bins);
		plat->has_gmac = 1;
		plat->pmt = 1;
	}

	if (of_device_is_compatible(np, "snps,dwmac-3.40a")) {
		plat->has_gmac = 1;
		plat->enh_desc = 1;
		plat->tx_coe = 1;
		plat->bugged_jumbo = 1;
		plat->pmt = 1;
	}

	if (of_device_is_compatible(np, "snps,dwmac-4.00") ||
	    of_device_is_compatible(np, "snps,dwmac-4.10a") ||
	    of_device_is_compatible(np, "snps,dwmac-4.20a") ||
	    of_device_is_compatible(np, "snps,dwmac-5.10a")) {
		plat->has_gmac4 = 1;
		plat->has_gmac = 0;
		plat->pmt = 1;
		plat->tso_en = of_property_read_bool(np, "snps,tso");
	}

	if (of_device_is_compatible(np, "snps,dwmac-3.610") ||
		of_device_is_compatible(np, "snps,dwmac-3.710")) {
		plat->enh_desc = 1;
		plat->bugged_jumbo = 1;
		plat->force_sf_dma_mode = 1;
	}

	if (of_device_is_compatible(np, "snps,dwxgmac")) {
		plat->has_xgmac = 1;
		plat->pmt = 1;
		plat->tso_en = of_property_read_bool(np, "snps,tso");
	}

	dma_cfg = devm_kzalloc(&pdev->dev, sizeof(*dma_cfg),
			       GFP_KERNEL);
	if (!dma_cfg) {
		stmmac_remove_config_dt(pdev, plat);
		return ERR_PTR(-ENOMEM);
	}
	plat->dma_cfg = dma_cfg;

	of_property_read_u32(np, "snps,pbl", &dma_cfg->pbl);
	if (!dma_cfg->pbl)
		dma_cfg->pbl = DEFAULT_DMA_PBL;
	of_property_read_u32(np, "snps,txpbl", &dma_cfg->txpbl);
	of_property_read_u32(np, "snps,rxpbl", &dma_cfg->rxpbl);
	dma_cfg->pblx8 = !of_property_read_bool(np, "snps,no-pbl-x8");

	dma_cfg->aal = of_property_read_bool(np, "snps,aal");
	dma_cfg->fixed_burst = of_property_read_bool(np, "snps,fixed-burst");
	dma_cfg->mixed_burst = of_property_read_bool(np, "snps,mixed-burst");

	plat->force_thresh_dma_mode = of_property_read_bool(np, "snps,force_thresh_dma_mode");
	if (plat->force_thresh_dma_mode) {
		plat->force_sf_dma_mode = 0;
		dev_warn(&pdev->dev,
			 "force_sf_dma_mode is ignored if force_thresh_dma_mode is set.\n");
	}

	of_property_read_u32(np, "snps,ps-speed", &plat->mac_port_sel_speed);

	plat->axi = stmmac_axi_setup(pdev);

	rc = stmmac_mtl_setup(pdev, plat);
	if (rc) {
		stmmac_remove_config_dt(pdev, plat);
		return ERR_PTR(rc);
	}

	/* clock setup */
	if (!of_device_is_compatible(np, "snps,dwc-qos-ethernet-4.10")) {
		plat->stmmac_clk = devm_clk_get(&pdev->dev,
						STMMAC_RESOURCE_NAME);
		if (IS_ERR(plat->stmmac_clk)) {
			dev_warn(&pdev->dev, "Cannot get CSR clock\n");
			plat->stmmac_clk = NULL;
		}
		clk_prepare_enable(plat->stmmac_clk);
	}

	plat->pclk = devm_clk_get(&pdev->dev, "pclk");
	if (IS_ERR(plat->pclk)) {
		if (PTR_ERR(plat->pclk) == -EPROBE_DEFER)
			goto error_pclk_get;

		plat->pclk = NULL;
	}
	clk_prepare_enable(plat->pclk);

	/* Fall-back to main clock in case of no PTP ref is passed */
	plat->clk_ptp_ref = devm_clk_get(&pdev->dev, "ptp_ref");
	if (IS_ERR(plat->clk_ptp_ref)) {
		plat->clk_ptp_rate = clk_get_rate(plat->stmmac_clk);
		plat->clk_ptp_ref = NULL;
		dev_info(&pdev->dev, "PTP uses main clock\n");
	} else {
		plat->clk_ptp_rate = clk_get_rate(plat->clk_ptp_ref);
		dev_dbg(&pdev->dev, "PTP rate %d\n", plat->clk_ptp_rate);
	}

	plat->stmmac_rst = devm_reset_control_get(&pdev->dev,
						  STMMAC_RESOURCE_NAME);
	if (IS_ERR(plat->stmmac_rst)) {
		if (PTR_ERR(plat->stmmac_rst) == -EPROBE_DEFER)
			goto error_hw_init;

		dev_info(&pdev->dev, "no reset control found\n");
		plat->stmmac_rst = NULL;
	}

	return plat;

error_hw_init:
	clk_disable_unprepare(plat->pclk);
error_pclk_get:
	clk_disable_unprepare(plat->stmmac_clk);

	return ERR_PTR(-EPROBE_DEFER);
}

/**
 * stmmac_remove_config_dt - undo the effects of stmmac_probe_config_dt()
 * @pdev: platform_device structure
 * @plat: driver data platform structure
 *
 * Release resources claimed by stmmac_probe_config_dt().
 */
void stmmac_remove_config_dt(struct platform_device *pdev,
			     struct plat_stmmacenet_data *plat)
{
	clk_disable_unprepare(plat->stmmac_clk);
	clk_disable_unprepare(plat->pclk);
	of_node_put(plat->phy_node);
	of_node_put(plat->mdio_node);
}
#else
struct plat_stmmacenet_data *
stmmac_probe_config_dt(struct platform_device *pdev, const char **mac)
{
	return ERR_PTR(-EINVAL);
}

void stmmac_remove_config_dt(struct platform_device *pdev,
			     struct plat_stmmacenet_data *plat)
{
}
#endif /* CONFIG_OF */
EXPORT_SYMBOL_GPL(stmmac_probe_config_dt);
EXPORT_SYMBOL_GPL(stmmac_remove_config_dt);

int stmmac_get_platform_resources(struct platform_device *pdev,
				  struct stmmac_resources *stmmac_res)
{
	memset(stmmac_res, 0, sizeof(*stmmac_res));

	/* Get IRQ information early to have an ability to ask for deferred
	 * probe if needed before we went too far with resource allocation.
	 */
	stmmac_res->irq = platform_get_irq_byname(pdev, "macirq");
	if (stmmac_res->irq < 0)
		return stmmac_res->irq;

	/* On some platforms e.g. SPEAr the wake up irq differs from the mac irq
	 * The external wake up irq can be passed through the platform code
	 * named as "eth_wake_irq"
	 *
	 * In case the wake up interrupt is not passed from the platform
	 * so the driver will continue to use the mac irq (ndev->irq)
	 */
	stmmac_res->wol_irq =
		platform_get_irq_byname_optional(pdev, "eth_wake_irq");
	if (stmmac_res->wol_irq < 0) {
		if (stmmac_res->wol_irq == -EPROBE_DEFER)
			return -EPROBE_DEFER;
		dev_info(&pdev->dev, "IRQ eth_wake_irq not found\n");
		stmmac_res->wol_irq = stmmac_res->irq;
	}

	stmmac_res->lpi_irq =
		platform_get_irq_byname_optional(pdev, "eth_lpi");
	if (stmmac_res->lpi_irq < 0) {
		if (stmmac_res->lpi_irq == -EPROBE_DEFER)
			return -EPROBE_DEFER;
		dev_info(&pdev->dev, "IRQ eth_lpi not found\n");
	}

	stmmac_res->addr = devm_platform_ioremap_resource(pdev, 0);

	return PTR_ERR_OR_ZERO(stmmac_res->addr);
}
EXPORT_SYMBOL_GPL(stmmac_get_platform_resources);

/**
 * stmmac_pltfr_remove
 * @pdev: platform device pointer
 * Description: this function calls the main to free the net resources
 * and calls the platforms hook and release the resources (e.g. mem).
 */
int stmmac_pltfr_remove(struct platform_device *pdev)
{
	struct net_device *ndev = platform_get_drvdata(pdev);
	struct stmmac_priv *priv = netdev_priv(ndev);
	struct plat_stmmacenet_data *plat = priv->plat;
	int ret = stmmac_dvr_remove(&pdev->dev);

	if (plat->exit)
		plat->exit(pdev, plat->bsp_priv);

	stmmac_remove_config_dt(pdev, plat);

	return ret;
}
EXPORT_SYMBOL_GPL(stmmac_pltfr_remove);

/**
 * stmmac_pltfr_suspend
 * @dev: device pointer
 * Description: this function is invoked when suspend the driver and it direcly
 * call the main suspend function and then, if required, on some platform, it
 * can call an exit helper.
 */
static int __maybe_unused stmmac_pltfr_suspend(struct device *dev)
{
	int ret;
	struct net_device *ndev = dev_get_drvdata(dev);
	struct stmmac_priv *priv = netdev_priv(ndev);
	struct platform_device *pdev = to_platform_device(dev);

	ret = stmmac_suspend(dev);
	if (priv->plat->exit)
		priv->plat->exit(pdev, priv->plat->bsp_priv);

	return ret;
}

/**
 * stmmac_pltfr_resume
 * @dev: device pointer
 * Description: this function is invoked when resume the driver before calling
 * the main resume function, on some platforms, it can call own init helper
 * if required.
 */
static int __maybe_unused stmmac_pltfr_resume(struct device *dev)
{
	struct net_device *ndev = dev_get_drvdata(dev);
	struct stmmac_priv *priv = netdev_priv(ndev);
	struct platform_device *pdev = to_platform_device(dev);

	if (priv->plat->init)
		priv->plat->init(pdev, priv->plat->bsp_priv);

	return stmmac_resume(dev);
}

static int __maybe_unused stmmac_runtime_suspend(struct device *dev)
{
	struct net_device *ndev = dev_get_drvdata(dev);
	struct stmmac_priv *priv = netdev_priv(ndev);

	stmmac_bus_clks_config(priv, false);

	return 0;
}

static int __maybe_unused stmmac_runtime_resume(struct device *dev)
{
	struct net_device *ndev = dev_get_drvdata(dev);
	struct stmmac_priv *priv = netdev_priv(ndev);

	return stmmac_bus_clks_config(priv, true);
}

const struct dev_pm_ops stmmac_pltfr_pm_ops = {
	SET_SYSTEM_SLEEP_PM_OPS(stmmac_pltfr_suspend, stmmac_pltfr_resume)
	SET_RUNTIME_PM_OPS(stmmac_runtime_suspend, stmmac_runtime_resume, NULL)
};
EXPORT_SYMBOL_GPL(stmmac_pltfr_pm_ops);

MODULE_DESCRIPTION("STMMAC 10/100/1000 Ethernet platform support");
MODULE_AUTHOR("Giuseppe Cavallaro <peppe.cavallaro@st.com>");
MODULE_LICENSE("GPL");