Can't connect to BB10

[mencacci]

Hello there, I compiled and installed on Debian Testing, but it doesn't connect to BB,,,
I disabled wi-fi, device in Develop Mode, enetred pw, but I get only:
"Communication Error: 4 (Socket operation timed out) from 169.254.0.1"

this is my route output
Destination Gateway Genmask Flags Metric Ref Use Iface
default fritz.box 0.0.0.0 UG 600 0 0 wlp5s0
link-local 0.0.0.0 255.255.255.252 U 100 0 0 enp0s26u1u1
BLACKBERRY-B92C debian.local 255.255.255.255 UGH 100 0 0 enp0s26u1u1
192.168.178.0 0.0.0.0 255.255.255.0 U 600 0 0 wlp5s0
thanx in advance for your help

[xsacha]

enp0s26u1u1 is the network device. Does it have an IP address from dhcpcd?
If not, run dhcpcd on it.
Otherwise, try rebooting your phone when you get this error.

[mencacci]

Hello xsacha, here my ifconfig output:
enp0s26u1u1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 169.254.0.2 netmask 255.255.255.252 broadcast 169.254.0.3
inet6 fe80::7b53:e814:7eab:206d prefixlen 64 scopeid 0x20
ether 42:6f:2a:95:b6:71 txqueuelen 1000 (Ethernet)
RX packets 68 bytes 25204 (24.6 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 219 bytes 20878 (20.3 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
route output:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
link-local 0.0.0.0 255.255.255.252 U 100 0 0 enp0s26u1u1
BLACKBERRY-B92C debian.local 255.255.255.255 UGH 100 0 0 enp0s26u1u1

I tried rebooting BB, but nothing....it detect BB on USB but always same error....
"Communication Error: 4 (Socket operation timed out) from 169.254.0.1"
any hints? thanx

[mencacci]

Hello xsacha, I found that I NEED to be connected by USB, and to have Wi-Fi active, so it works fine.

[xsacha]

                                                                                  You need USB because Blackberry doesn't allow any upgrades over wifi. Only app install.Wifi isn't needed at all.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        From: mencacciSent: Saturday, 2 July 2016 2:18 AMTo: xsacha/SachesiReply To: xsacha/SachesiCc: xsacha; CommentSubject: Re: [xsacha/Sachesi] Can't connect to BB10 (#90)Hello xsacha, I found that I NEED to be connected  by USB, and  to have Wi-Fi active, so it works fine.

—You are receiving this because you commented.Reply to this email directly, view it on GitHub, or mute the thread.

[dustybb]

Resolved on MacOSX Mac OS 10.11
*Error Message: Cannot communicate with connected device

1. Within the menu bar, select the Apple icon
2. Select System Preferences
3. Tap Networks
4. Note the name of the BlackBerry interface listed (Blackberry (en5 or 6))
5. Select the Plus sign to add a new interface
6. Within the Interface drop down, select the OTHER BlackBerry interface listed So if it says en5 then you select en6
7. Select Create
8. Select Apply
9. Restart the computer (unplug usb cable when doing restart) For me worked even without restart!

But before you restart computer, delete the other blackberry interface that was listed, the one before you created a new one. So that there is no confusion between the two and it should work.

[klango]

Hi I ended up here when had the problem connecting my Passport (10.3.3.1435)

1. Sachesi 2.0.3
2. Dev mode on
3. Mass storage off
4. Errors
   "Communication Error: 4 (Socket operation timed out) from 169.254.0.1" and
   "Communication Error: 203 (Error downloading http://192.168.2.105/cgi-bin/discovery.cgi - server replied: Not Found) from 192.168.2.105"

Tried all suggested procedures with no luck. I changed the IP Adress on BB10 under Development mode to 169.254.0.5 (instead default 169.254.0.1)
Sachesi then was able to recognize. I hope this can help someone.

Cheers

[klango]

Just a little update on this, I figured it out the connection problem.

While changing the IP Adress on BB10 under Development mode OR RIGHT AFTER connecting to the pc, you need to assign dhcpclient (dhcpclient ) in my case enp0**