AMITSE.sdl

TOKEN
	Name  = "AMITSE_SUPPORT"
	Value  = "1"
	Help  = "Main switch to enable AMITSE support in Project"
	TokenType = Boolean
	TargetEQU = Yes
	TargetMAK = Yes
	Master = Yes
End

TOKEN
	Name  = "TSE_MAJOR"
	Value  = "0x02"
	Help  = "TSE Major Version number"
	TokenType = Expression
	TargetMAK = Yes
	TargetH = Yes
End

TOKEN
	Name  = "TSE_MINOR"
	Value  = "0x19"
	Help  = "TSE Minor Version number"
	TokenType = Expression
	TargetMAK = Yes
	TargetH = Yes
End

TOKEN
	Name  = "TSE_BUILD"
	Value  = "0x1268"
	Help  = "TSE Build number"
	TokenType = Expression
	TargetMAK = Yes
	TargetH = Yes
End

TOKEN
	Name  = "SETUP_BMP_LOGO_SUPPORT"
	Value  = "1"
	Help  = "BMP Logo support in Setup"
	TokenType = Boolean
	TargetMAK = Yes
	TargetH = Yes
End

TOKEN
	Name  = "SETUP_GIF_LOGO_SUPPORT"
	Value  = "0"
	Help  = "GIF Logo support in Setup"
	TokenType = Boolean
	TargetMAK = Yes
	TargetH = Yes
End

TOKEN
	Name  = "SETUP_JPEG_LOGO_SUPPORT"
	Value  = "0"
	Help  = "JPEG Logo support in Setup."
	TokenType = Boolean
	TargetEQU = Yes
	TargetMAK = Yes
	TargetH = Yes
End

TOKEN
	Name  = "SETUP_PCX_LOGO_SUPPORT"
	Value  = "0"
	Help  = "PCX Logo support in Setup"
	TokenType = Boolean
	TargetMAK = Yes
	TargetH = Yes
End

TOKEN
	Name  = "SETUP_PNG_LOGO_SUPPORT"
	Value  = "0"
	Help  = "PNG Logo support in Setup"
	TokenType = Boolean
	TargetMAK = Yes
	TargetH = Yes
End

TOKEN
	Name  = "TSE_WATCHDOG_TIMER"
	Value  = "1"
	Help  = "Token to set watch dog timer support"
	TokenType = Boolean
	TargetMAK = Yes
	TargetH = Yes
End

TOKEN
	Name  = "SETUP_OEM_FORMAT_LOGO_SUPPORT"
	Value  = "0"
	Help  = "GIF Logo support in Setup"
	TokenType = Boolean
	TargetMAK = Yes
	TargetH = Yes
End

TOKEN
	Name  = "SETUP_GRAYOUT_READONLY_CONTROL"
	Value  = "0"
	Help  = "Diaplay readonly controls as grayout"
	TokenType = Boolean
	TargetMAK = Yes
	TargetH = Yes
End

TOKEN
	Name  = "TSE_SETUP_GRAYOUT_SELECTABLE"
	Value  = "0"
	Help  = "0 is DEFAULT. set 1=> to allow grayed-out options set focus and to be selectable by the user. Set 0=> to make grayed-out options not to focus and editable"
	TokenType = Boolean
	TargetMAK = Yes
	TargetH = Yes
End

TOKEN
	Name  = "MAX_POST_GC_MODE"
	Value  = "800, 600"
	Help  = "Port this SDL to select the Maximum Support Graphical module. in HRes, VRes format."
	TokenType = Expression
	TargetMAK = Yes
	TargetH = Yes
End

TOKEN
	Name  = "TSE_DEBUG_MESSAGES"
	Value  = "0x0"
	Help  = "A switch to enable TSE Debug messages: Bit0: Uefi functions, Bit1: HiiCallbacks, Bit2: HiiNotifications, Bit3: HiiParsing"
	TokenType = Expression
	TargetH = Yes
End

TOKEN
	Name  = "SUPPRESS_PRINT"
	Value  = "1"
	Help  = "A switch to supress TSE Debug messages."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "SERIAL_DEBUG"
	Value  = "1"
	Help  = "A switch to print TSE Debug messages over Serial Port."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "HPKTOOL"
	Value  = "$(SILENT)$(TSEBIN_DIR)\UefiHPKTOOL"
	TokenType = Expression
	TargetMAK = Yes
End

TOKEN
	Name  = "SETUP_PRINT_ENTER_SETUP_MSG"
	Value  = "1"
	Help  = "Set to 1 to print the Setup Enter messages in POST"
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "SETUP_PRINT_ENTER_BBSPOPUP_MSG"
	Value  = "1"
	Help  = "Set to 1 to print the Setup BBS Popup Menu messages in POST"
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "SETUP_ENTRY_UNICODE"
	Value  = "0x0000"
	Help  = "Set to one of the defined constants from EFI_SIMPLE_TEXT_INPUT protocol or a character value like L'a'. Remember to check STR_DEL_ENTER_SETUP string in AmiTSEStr.uni."
	TokenType = Expression
	TargetH = Yes
End

TOKEN
	Name  = "SETUP_ENTRY_SCAN"
	Value  = "EFI_SCAN_DEL"
	Help  = "Set to one of the defined constants from EFI_SIMPLE_TEXT_INPUT protocol. Remember to check STR_DEL_ENTER_SETUP string in AmiTSEStr.uni, and STR_DEL_ENTER_SETUP_SREDIR in Terminal.uni if using Serial Redirection"
	TokenType = Expression
	TargetH = Yes
End

TOKEN
	Name  = "SETUP_ENTRY_SHIFT_STATE"
	Value  = "0"
	Help  = "Set to one of the defined constants from AMI_KEY_CODE_PROTOCOL."
	TokenType = Expression
	TargetH = Yes
End

TOKEN
	Name  = "SETUP_ALT_ENTRY_ENABLE"
	Value  = "1"
	Help  = "Enable or disable the SETUP_ALT_ENTRY"
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "SETUP_ALT_ENTRY_UNICODE"
	Value  = "0x0000"
	Help  = "Set to one of the defined constants from EFI_SIMPLE_TEXT_INPUT protocol or a character value like L'a'. Remember to check STR_DEL_ENTER_SETUP string in AmiTSEStr.uni."
	TokenType = Expression
	TargetH = Yes
	Token = "SETUP_ALT_ENTRY_ENABLE" "!=" "0"
End

TOKEN
	Name  = "SETUP_ALT_ENTRY_SCAN"
	Value  = "EFI_SCAN_ESC"
	Help  = "Set to one of the defined constants from EFI_SIMPLE_TEXT_INPUT protocol. Remember to check STR_DEL_ENTER_SETUP string in AmiTSEStr.uni,and STR_DEL_ENTER_SETUP_SREDIR in Terminal.uni if using Serial Redirection"
	TokenType = Expression
	TargetH = Yes
	Token = "SETUP_ALT_ENTRY_ENABLE" "!=" "0"
End

TOKEN
	Name  = "SETUP_ALT_ENTRY_SHIFT_STATE"
	Value  = "0"
	Help  = "Set to one of the defined constants from AMI_KEY_CODE_PROTOCOL."
	TokenType = Expression
	TargetH = Yes
	Token = "SETUP_ALT_ENTRY_ENABLE" "!=" "0"
End

TOKEN
	Name  = "TSE_ANSI_ESC_CODE_SUPPORT"
	Value  = "0"
	Help  = "Tse advanced Esc colour support"
	TokenType = Integer
	TargetH = Yes
End

TOKEN
	Name  = "SETUP_TOGGLE_KEY_UNICODE"
	Value  = "L'\t'"
	Help  = "Set to one of the defined constants from EFI_SIMPLE_TEXT_INPUT protocol or a character value like L'a'."
	TokenType = Expression
	TargetH = Yes
End

TOKEN
	Name  = "SETUP_TOGGLE_KEY_SCANCODE"
	Value  = "0x0000"
	Help  = "Set to one of the defined constants from EFI_SIMPLE_TEXT_INPUT protocol."
	TokenType = Expression
	TargetH = Yes
End

TOKEN
	Name  = "SETUP_BBS_POPUP_ENABLE"
	Value  = "0"
	Help  = "Enable or disable the SETUP_BBS_POPUP_ENABLE."
	TokenType = Boolean
	TargetH = Yes
End



TOKEN
	Name  = "POPUP_MENU_ENTER_SETUP"
	Value  = "1"
	Help  = "1 => Allows to enter setup from BBS popup"
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "POPUP_MENU_ENTRY_UNICODE"
	Value  = "0x0000"
	Help  = "Set to one of the defined constants from EFI_SIMPLE_TEXT_INPUT protocol or a character value like L'a'"
	TokenType = Expression
	TargetH = Yes
	Token = "SETUP_BBS_POPUP_ENABLE" "!=" "0"
End

TOKEN
	Name  = "POPUP_MENU_ENTRY_SCAN"
	Value  = "EFI_SCAN_F7"
	Help  = "Set to one of the defined constants from EFI_SIMPLE_TEXT_INPUT protocol.Remember to check STR_BBS_POPUP_SREDIR in Terminal.uni if using Serial Redirection. "
	TokenType = Expression
	TargetH = Yes
	Token = "SETUP_BBS_POPUP_ENABLE" "!=" "0"
End

TOKEN
	Name  = "POPUP_MENU_ENTRY_SHIFT_STATE"
	Value  = "0"
	Help  = "Set to one of the defined constants from AMI_KEY_CODE_PROTOCOL."
	TokenType = Expression
	TargetH = Yes
	Token = "SETUP_BBS_POPUP_ENABLE" "!=" "0"
End

TOKEN
	Name  = "SETUP_OEM_KEY1_ENABLE"
	Value  = "0"
	Help  = "Enable or disable the SETUP_OEM_KEY1"
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "SETUP_OEM_KEY1_UNICODE"
	Value  = "0x0000"
	Help  = "Set to one of the defined constants from EFI_SIMPLE_TEXT_INPUT protocol or a character value like L'a'"
	TokenType = Expression
	TargetH = Yes
	Token = "SETUP_OEM_KEY1_ENABLE" "!=" "0"
End

TOKEN
	Name  = "SETUP_OEM_KEY1_SCAN"
	Value  = "0x0000"
	Help  = "Set to one of the defined constants from EFI_SIMPLE_TEXT_INPUT protocol"
	TokenType = Expression
	TargetH = Yes
	Token = "SETUP_OEM_KEY1_ENABLE" "!=" "0"
End

TOKEN
	Name  = "SETUP_OEM_KEY2_ENABLE"
	Value  = "0"
	Help  = "Enable or disable the SETUP_OEM_KEY2"
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "SETUP_OEM_KEY2_UNICODE"
	Value  = "0x0000"
	Help  = "Set to one of the defined constants from EFI_SIMPLE_TEXT_INPUT protocol or a character value like L'a'"
	TokenType = Expression
	TargetH = Yes
	Token = "SETUP_OEM_KEY2_ENABLE" "!=" "0"
End

TOKEN
	Name  = "SETUP_OEM_KEY2_SCAN"
	Value  = "0x0000"
	Help  = "Set to one of the defined constants from EFI_SIMPLE_TEXT_INPUT protocol"
	TokenType = Expression
	TargetH = Yes
	Token = "SETUP_OEM_KEY2_ENABLE" "!=" "0"
End

TOKEN
	Name  = "SETUP_OEM_KEY3_ENABLE"
	Value  = "0"
	Help  = "Enable or disable the SETUP_OEM_KEY3"
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "SETUP_OEM_KEY3_UNICODE"
	Value  = "0x0000"
	Help  = "Set to one of the defined constants from EFI_SIMPLE_TEXT_INPUT protocol or a character value like L'a'"
	TokenType = Expression
	TargetH = Yes
	Token = "SETUP_OEM_KEY3_ENABLE" "!=" "0"
End

TOKEN
	Name  = "SETUP_OEM_KEY3_SCAN"
	Value  = "0x0000"
	Help  = "Set to one of the defined constants from EFI_SIMPLE_TEXT_INPUT protocol"
	TokenType = Expression
	TargetH = Yes
	Token = "SETUP_OEM_KEY3_ENABLE" "!=" "0"
End

TOKEN
	Name  = "SETUP_OEM_KEY4_ENABLE"
	Value  = "0"
	Help  = "Enable or disable the SETUP_OEM_KEY4"
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "SETUP_OEM_KEY4_UNICODE"
	Value  = "0x0000"
	Help  = "Set to one of the defined constants from EFI_SIMPLE_TEXT_INPUT protocol or a character value like L'a'"
	TokenType = Expression
	TargetH = Yes
	Token = "SETUP_OEM_KEY4_ENABLE" "!=" "0"
End

TOKEN
	Name  = "SETUP_OEM_KEY4_SCAN"
	Value  = "0x0000"
	Help  = "Set to one of the defined constants from EFI_SIMPLE_TEXT_INPUT protocol"
	TokenType = Expression
	TargetH = Yes
	Token = "SETUP_OEM_KEY4_ENABLE" "!=" "0"
End

TOKEN
	Name  = "TSE_BOOT_ONLY_SPLASH_LOGO_SUPPORT"
	Value  = "1"
	Help  = "Turn on the TSE to make boot only driver without UI"
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "SETUP_RUNTIME_IFR_PROCESSING"
	Value  = "1"
	Help  = "Processes IFR data that are added to hii at runtime.  This will cause an increased FW footprint and remove AMIBCP compatibility for those new pages."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "TSE_HOOKBASE_VALUE"
	Value  = "0xFFFF0000"
	Help  = "Base value for the HOOK defines that Allows to manage TSE HOOKs.Format 0xXXXX0000,Makeure it is not conflicts physical memory Address"
	TokenType = Expression
	TargetH = Yes
End

TOKEN
	Name  = "SETUP_PASSWORD_LENGTH"
	Value  = "20"
	Help  = "Default maximum password length. TSE Source needed to change the length"
	TokenType = Integer
	TargetH = Yes
End

TOKEN
	Name  = "MAX_MSGBOX_WIDTH"
	Value  = "45"
	Help  = "Set the value to change the message box dispaly width."
	TokenType = Integer
	TargetH = Yes
End

TOKEN
	Name  = "SETUP_PASSWORD_NON_CASE_SENSITIVE"
	Value  = "1"
	Help  = "Allow to use of case sensitive password. Note:This token should be OFF with SETUP_STORE_KEYCODE_PASSWORD value 1 or 2."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "WIDE_GLYPH_SUPPORT"
	Value  = "1"
	Help  = "Far east language support"
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "SETUP_DEFAULT_TIMEOUT"
	Value  = "10"
	Help  = "Default timeout value before system boots"
	TokenType = Integer
	TargetH = Yes
End

TOKEN
	Name  = "SETUP_TIMEOUT_IN_TENTHOFSEC"
	Value  = "0"
	Help  = "Maks the Setup Timout value as 1/10 Sec to support fast boot. Make sure to change the Vfr and Strings if this is ON."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "TSE_FOR_64BIT"
	Value  = "1"
	Help  = "Enable build support for 64 bit(x64/IA64) TSE"
	TokenType = Boolean
	TargetMAK = Yes
	TargetH = Yes
	Token = "X64_SUPPORT" "=" "1"
End

TOKEN
	Name  = "TSE_CSM_SUPPORT"
	Value  = "1"
	Help  = "Include CSM Support in TSE"
	TokenType = Boolean
	TargetH = Yes
	Token = "CSM_SUPPORT" "=" "1"
End

TOKEN
	Name  = "PROGRESSBAR_BACKGROUNDCOLOR"
	Value  = "{0,0,0,0}"
	Help  = "Set the value of progressbar bgcolor in EFI_UGA_PIXEL format"
	TokenType = Expression
	TargetH = Yes
End

TOKEN
	Name  = "PROGRESSBAR_BORDERCOLOR"
	Value  = "{0xc0,0xc0,0xc0,0}"
	Help  = "Set the value of progressbar border color in EFI_UGA_PIXEL format"
	TokenType = Expression
	TargetH = Yes
End

TOKEN
	Name  = "PROGRESSBAR_FILLCOLOR"
	Value  = "{0xc0,0xc0,0xc0,0}"
	Help  = "Set the value of progressbar fill color in EFI_UGA_PIXEL format"
	TokenType = Expression
	TargetH = Yes
End

TOKEN
	Name  = "POPUP_MENU_SHOW_ALL_BBS_DEVICES"
	Value  = "0"
	Help  = "1 => Shows all BBS devices in BBS POPup menu. 0 => Shows only the first device of a BBS type in BBS POPUP menu."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "SETUP_SHOW_ALL_BBS_DEVICES"
	Value  = "0"
	Help  = "1 => Shows all BBS devices in boot override menu. 0 => Shows only the first device of a BBS type in override menu."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "TSE_DEVICE_PATH_NAME"
	Value  = "0"
	Help  = "Turn on to be able to configure name for legacy devices."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "TSE_DEVICE_PATH_UEFI_NAME"
	Value  = "1"
	Help  = "Turn on to be able to configure name for UEFI devices using Device path."
	TokenType = Boolean
	TargetH = Yes
	Token = "TSE_DEVICE_PATH_NAME" "=" "1"
End

TOKEN
	Name  = "TSE_BOOT_NOW_IN_BOOT_ORDER"
	Value  = "0"
	Help  = "Turn on to see boot override/BBS Popup menu with in the devices listed in boot order."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "TSE_CLEAR_USERPW_WITH_ADMINPW"
	Value  = "0"
	Help  = "Support to clear the User password if Admin password is empty"
	TokenType = Boolean
	TargetEQU = Yes
	TargetH = Yes
End

TOKEN
	Name  = "SETUP_USE_AMI_DEFAULTS"
	Value  = "1"
	Help  = "Use AMIBCP compatible defaults instead of HII defaults"
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "TSE_LOAD_PASSWORD_ON_DEFAULTS"
	Value  = "0"
	Help  = "Loads the User/Admin password from Defaults.If Off, Passwords are unaffected while loading defaults"
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "MINISETUP_MOUSE_SUPPORT"
	Value  = "0"
	Help  = "Mouse support."
	TokenType = Boolean
	TargetEQU = Yes
	TargetH = Yes
End

TOKEN
	Name  = "OLD_MOUSE_DRIVER_SUPPORT"
	Value  = "0"
	Help  = "Old Mouse Driver Mouse support."
	TokenType = Boolean
	TargetH = Yes
	Token = "MINISETUP_MOUSE_SUPPORT" "!=" "0"
End

TOKEN
	Name  = "SINGLE_CLICK_ACTIVATION"
	Value  = "0"
	Help  = "On- Single click will be used to enter the subMenu and Select the option. OFF- Double Click will be used."
	TokenType = Boolean
	TargetEQU = Yes
	TargetH = Yes
End

TOKEN
	Name  = "TSE_USE_AMI_EFI_KEYCODE_PROTOCOL"
	Value  = "1"
	Help  = "AMIKeyCode Protocol support. TSE Sources need to be present to disable this token"
	TokenType = Boolean
	TargetEQU = Yes
	TargetH = Yes
End

TOKEN
	Name  = "SETUP_STORE_KEYCODE_PASSWORD"
	Value  = "0"
	Help  = "For Extended Password support, the Value can be 1 or 2. Set Value as 1 to support Efi Key as password. Set Value as 2 to support Scan Code in password. Need AMIKeyCode Protocol & TSE sources support, Set Value as 0 to support Unicode in password, which is the default"
	TokenType = Integer
	TargetEQU = Yes
	TargetH = Yes
	Token = "TSE_USE_AMI_EFI_KEYCODE_PROTOCOL" "!=" "0"
End

TOKEN
	Name  = "SETUP_PRINT_EVAL_MSG"
	Value  = "0"
	Help  = "Enable/Disable Evaluation message in Post screen"
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "TSE_PRN_SCRN_EVENT_SUPPORT"
	Value  = "0"
	Help  = "Turn on to generate Print screen event if TSE_PRN_SCRN_KEY_SCAN key pressed."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "STYLE_DATE_FORMAT"
	Value  = "0"
	Help  = "Controls the Date Format. Possible values are 0 to 4. 0 -> MMDDYYYY, 1 -> YYYYDDMM, 2 -> DDMMYYYY, 3 -> YYYYMMDD. Need TSE source to change the value"
	TokenType = Integer
	TargetH = Yes
	Range  = "0-3"
End

TOKEN
	Name  = "STYLE_SHOW_DAY"
	Value  = "1"
	Help  = "Controls the display of Day in Date Format."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "SETUP_USER_PASSWORD_POLICY"
	Value  = "1"
	Help  = "Allow to use system with Admin password set and User password NOT set (Boot Password policy)"
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "SETUP_SUPPORT_PLATFORM_LANG_VAR"
	Value  = "1"
	Help  = "Set to enable PlatformLang and PlatformLangCode Vars."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "SETUP_SUPPORT_ADD_BOOT_OPTION"
	Value  = "0"
	Help  = "Set to enable Add/Delete boot option."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "SETUP_SUPPORT_ADD_DRIVER_OPTION"
	Value  = "0"
	Help  = "Set to enable Add/Delete Driver option."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "SETUP_SUPPORT_RES_ADD_DEL_BOOT_OPTION_NAME"
	Value  = "0"
	Help  = "Not to allow Reserved Names (RESERVED_ADD_DEL_BOOT_OPTION_NAME) for new Boot Options. Reserved names defined in RESERVED_ADD_DEL_BOOT_OPTION_NAME SDL token"
	TokenType = Boolean
	TargetH = Yes
	Token = "SETUP_SUPPORT_ADD_BOOT_OPTION" "=" "1"
End

TOKEN
	Name  = "RESERVED_ADD_DEL_BOOT_OPTION_NAME"
	Value  = "UEFI:"
	Help  = "Reserved names that are not allowed to use for add or delete boot options"
	TokenType = Expression
	TargetH = Yes
	Token = "SETUP_SUPPORT_RES_ADD_DEL_BOOT_OPTION_NAME" "=" "1"
End

TOKEN
	Name  = "SETUP_ENTRY_LEGACY_CODE"
	Value  = "0x53"
	Help  = "Set legacy scan code for entry key."
	TokenType = Expression
	TargetH = Yes
End

TOKEN
	Name  = "SETUP_ALT_ENTRY_LEGACY_CODE"
	Value  = "0x3c"
	Help  = "Set legacy code for Alternate entry key"
	TokenType = Expression
	TargetH = Yes
	Token = "SETUP_ALT_ENTRY_ENABLE" "!=" "0"
End

TOKEN
	Name  = "POPUP_MENU_ENTRY_LEGACY_CODE"
	Value  = "0x41"
	Help  = "Set legacy scan code for popup menu entry"
	TokenType = Expression
	TargetH = Yes
	Token = "SETUP_BBS_POPUP_ENABLE" "!=" "0"
End

TOKEN
	Name  = "SETUP_OEM_KEY1_LEGACY_CODE"
	Value  = "0x0"
	Help  = "Set legacy code for OEM key 1"
	TokenType = Expression
	TargetH = Yes
	Token = "SETUP_OEM_KEY1_ENABLE" "!=" "0"
End

TOKEN
	Name  = "SETUP_OEM_KEY1_EFIKEY"
	Value  = "0x5F"
	Help  = "Set to one of the defined EFI_KEY enumeration"
	TokenType = Expression
	TargetH = Yes
	Token = "SETUP_OEM_KEY1_ENABLE" "!=" "0"
	Token = "TSE_USE_AMI_EFI_KEYCODE_PROTOCOL" "!=" "0"
End

TOKEN
	Name  = "SETUP_OEM_KEY1_SHIFT"
	Value  = "0x00000000"
	Help  = "Set to one of the defined constants from EFI_SIMPLE_TEXT_INPUT_EX protocol"
	TokenType = Expression
	TargetH = Yes
	Token = "SETUP_OEM_KEY1_ENABLE" "!=" "0"
	Token = "TSE_USE_AMI_EFI_KEYCODE_PROTOCOL" "!=" "0"
End

TOKEN
	Name  = "SETUP_OEM_KEY1_TOGGLE"
	Value  = "0x00"
	Help  = "Set to one of the defined constants from EFI_SIMPLE_TEXT_INPUT_EX protocol"
	TokenType = Expression
	TargetH = Yes
	Token = "SETUP_OEM_KEY1_ENABLE" "!=" "0"
	Token = "TSE_USE_AMI_EFI_KEYCODE_PROTOCOL" "!=" "0"
End

TOKEN
	Name  = "SETUP_OEM_KEY2_LEGACY_CODE"
	Value  = "0x0"
	Help  = "Set legacy code for OEM key 2"
	TokenType = Expression
	TargetH = Yes
	Token = "SETUP_OEM_KEY2_ENABLE" "!=" "0"
End

TOKEN
	Name  = "SETUP_OEM_KEY2_EFIKEY"
	Value  = "0x00"
	Help  = "Set to one of the defined EFI_KEY enumeration"
	TokenType = Expression
	TargetH = Yes
	Token = "SETUP_OEM_KEY2_ENABLE" "!=" "0"
	Token = "TSE_USE_AMI_EFI_KEYCODE_PROTOCOL" "!=" "0"
End

TOKEN
	Name  = "SETUP_OEM_KEY2_SHIFT"
	Value  = "0x00000000"
	Help  = "Set to one of the defined constants from EFI_SIMPLE_TEXT_INPUT_EX protocol"
	TokenType = Expression
	TargetH = Yes
	Token = "SETUP_OEM_KEY2_ENABLE" "!=" "0"
	Token = "TSE_USE_AMI_EFI_KEYCODE_PROTOCOL" "!=" "0"
End

TOKEN
	Name  = "SETUP_OEM_KEY2_TOGGLE"
	Value  = "0x00"
	Help  = "Set to one of the defined constants from EFI_SIMPLE_TEXT_INPUT_EX protocol"
	TokenType = Expression
	TargetH = Yes
	Token = "SETUP_OEM_KEY2_ENABLE" "!=" "0"
	Token = "TSE_USE_AMI_EFI_KEYCODE_PROTOCOL" "!=" "0"
End

TOKEN
	Name  = "SETUP_OEM_KEY3_LEGACY_CODE"
	Value  = "0x0"
	Help  = "Set legacy code for OEM key 3"
	TokenType = Expression
	TargetH = Yes
	Token = "SETUP_OEM_KEY3_ENABLE" "!=" "0"
End

TOKEN
	Name  = "SETUP_OEM_KEY3_EFIKEY"
	Value  = "0x00"
	Help  = "Set to one of the defined EFI_KEY enumeration"
	TokenType = Expression
	TargetH = Yes
	Token = "SETUP_OEM_KEY3_ENABLE" "!=" "0"
	Token = "TSE_USE_AMI_EFI_KEYCODE_PROTOCOL" "!=" "0"
End

TOKEN
	Name  = "SETUP_OEM_KEY3_SHIFT"
	Value  = "0x00000000"
	Help  = "Set to one of the defined constants from EFI_SIMPLE_TEXT_INPUT_EX protocol"
	TokenType = Expression
	TargetH = Yes
	Token = "SETUP_OEM_KEY3_ENABLE" "!=" "0"
	Token = "TSE_USE_AMI_EFI_KEYCODE_PROTOCOL" "!=" "0"
End

TOKEN
	Name  = "SETUP_OEM_KEY3_TOGGLE"
	Value  = "0x00"
	Help  = "Set to one of the defined constants from EFI_SIMPLE_TEXT_INPUT_EX protocol"
	TokenType = Expression
	TargetH = Yes
	Token = "SETUP_OEM_KEY3_ENABLE" "!=" "0"
	Token = "TSE_USE_AMI_EFI_KEYCODE_PROTOCOL" "!=" "0"
End

TOKEN
	Name  = "SETUP_OEM_KEY4_LEGACY_CODE"
	Value  = "0x0"
	Help  = "Set legacy code for OEM key 4"
	TokenType = Expression
	TargetH = Yes
	Token = "SETUP_OEM_KEY4_ENABLE" "!=" "0"
End

TOKEN
	Name  = "SETUP_OEM_KEY4_EFIKEY"
	Value  = "0x00"
	Help  = "Set to one of the defined EFI_KEY enumeration"
	TokenType = Expression
	TargetH = Yes
	Token = "SETUP_OEM_KEY4_ENABLE" "!=" "0"
	Token = "TSE_USE_AMI_EFI_KEYCODE_PROTOCOL" "!=" "0"
End

TOKEN
	Name  = "SETUP_OEM_KEY4_SHIFT"
	Value  = "0x00000000"
	Help  = "Set to one of the defined constants from EFI_SIMPLE_TEXT_INPUT_EX protocol"
	TokenType = Expression
	TargetH = Yes
	Token = "SETUP_OEM_KEY4_ENABLE" "!=" "0"
	Token = "TSE_USE_AMI_EFI_KEYCODE_PROTOCOL" "!=" "0"
End

TOKEN
	Name  = "SETUP_OEM_KEY4_TOGGLE"
	Value  = "0x00"
	Help  = "Set to one of the defined constants from EFI_SIMPLE_TEXT_INPUT_EX protocol"
	TokenType = Expression
	TargetH = Yes
	Token = "SETUP_OEM_KEY4_ENABLE" "!=" "0"
	Token = "TSE_USE_AMI_EFI_KEYCODE_PROTOCOL" "!=" "0"
End

TOKEN
	Name  = "SETUP_SUPPORT_KEY_MONITORING"
	Value  = "0"
	Help  = "Enable or Disable monitoring keys during Legacy mode"
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "SETUP_STORE_EFI_KEY_PASSWORD"
	Value  = "0"
	Help  = "This Token becomes Obsolete after adding the Token SETUP_STORE_KEYCODE_PASSWORD. / Enables support to store EFI_KEYs as password. TSE Sources should be required to present to Enable this token."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "TSE_CAPITAL_BOOT_OPTION"
	Value  = "1"
	Help  = "This Token Stores/Creates the Boot Option numbers to Capital Hex Numbers"
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "SETUP_IDE_SECURITY_SUPPORT"
	Value  = "0"
	Help  = "0 =>IDE Security Interactive Password  1=> IDE Security Non interactive Password."
	TokenType = Boolean
	TargetH = Yes
	Token = "SECURITY_SUPPORT" "=" "1"
End

TOKEN
	Name  = "PASSWORD_WITH_SPECIAL_CHAR_SUPPORT"
	Value  = "1"
	Help  = "0 => Only alphanumeric characters are support in the Password 1 => Also supports printable special characters."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "SETUP_LINK_HISTORY_SUPPORT"
	Value  = "1"
	Help  = "Preserves navigation history of Ref linked pages. Pressing the <ESC> returns control to the previous page if the current page was linked from a REF control."
	TokenType = Boolean
	TargetEQU = Yes
	TargetH = Yes
End

TOKEN
	Name  = "SETUP_DISPLAY_SUBMENU_PAGETITLE"
	Value  = "0"
	Help  = "Displays page title of submenu pages in the menu tab."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "SETUP_GROUP_DYNAMIC_PAGES"
	Value  = "1"
	Help  = "Allows Dynamic IFR Pages to be relocated under subpages. Make sure to have the VFR changes to show the dynamic pages"
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
    Name  = "GROUP_DYNAMIC_PAGES_BY_CLASSCODE"
    Value  = "0"
    Help  = "Allows Dynamic IFR Pages to be grouped by type under subpages. Make sure to have the VFR changes to show the dynamic pages"
    TokenType = Boolean
    TargetH = Yes
    Token = "SETUP_GROUP_DYNAMIC_PAGES" "!=" "0"
End

TOKEN
	Name  = "SETUP_ORPHAN_PAGES_AS_ROOT_PAGE"
	Value  = "0"
	Help  = "Allows Orphan IFR Pages to be relocated to root pages."
	TokenType = Boolean
	TargetMAK = Yes
	TargetH = Yes
End

TOKEN
	Name  = "SETUP_ITK_COMPATIBILITY"
	Value  = "0"
	Help  = "Enables and disables ITK compatibility. Need customization in Board module to support ITK projects."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "NO_VARSTORE_SUPPORT"
	Value  = "0"
	Help  = "Enables and disables no var store support. This needs modification of VFRs. Need customization of board module."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "TSE_CONTINUE_BOOT_NOW_ON_FAIL"
	Value  = "1"
	Help  = "Turn on to continue boot to other device when selected one fails."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "SETUP_UPDATE_BOOT_ORDER_CURSOR"
	Value  = "0"
	Help  = "When the boot order is changed, the cursor moves with the selection. Else, the cursor remains in the same location as the current question."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "TSE_PRESERVE_DISABLED_BBS_DEVICE_ORDER"
	Value  = "0"
	Help  = "Prevents TSE from repositioning disabled BBS boot in the boot order."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "TSE_BOOT_TIME_OUT_AS_ZERO"
	Value  = "0"
	Help  = "1=>Provides Boot time out value as zero 0=> Reads from the NVRAM, defaultly it is disabled."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "TSE_SAVE_DISABLED_BBS_DEVICEPATH"
	Value  = "1"
	Help  = "1 => Saves the DevicePaths of Disabled BBS devices to NVRAM Variable. \Depends on that varaible to keep device disbaled in next boot. \0 => Doesn't save the Disabled BBS devicepath."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "TSE_POSTSCREEN_SCROLL_AREA"
	Value  = "{0,0,24,80}"
	Help  = "Format:{TopRow, TopCol, BottomRow, BottomCol}. Used to Configure the TSE PostScreen Scroll Area. Note Post message are still printed in whole Screen."
	TokenType = Expression
	TargetH = Yes
End

TOKEN
	Name  = "DRIVER_HEALTH_SUPPORT"
	Value  = "1"
	Help  = "1 = Enabling Driver health support in TSE and 0 = Disabling Driver health support in TSE."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "HONOR_DRVHLTH_CONFIGREQD_ON_BOOTFAIL"
	Value  = "0"
	Help  = "1 => If driver need to be configured during the device boot then this token should be enabled to display the form produced from dirver health protocol & 0 => Disables the form produced by the driver health protocol."
	TokenType = Integer
	TargetH = Yes
	Token = "DRIVER_HEALTH_SUPPORT" "=" "1"
End

TOKEN
	Name  = "EDK_1_05_RETRIEVE_DATA"
	Value  = "1"
	Help  = "Modified code to return BrowserCallback String according to either EDK browser or spec. Please be careful when to change this to 0, May cause Addon Card to not to work."
	TokenType = Boolean
	TargetMAK = Yes
	TargetH = Yes
	Lock = Yes
End

TOKEN
	Name  = "TSE_USE_OEM_ACTION_READ_KEY"
	Value  = "0"
	Help  = "If user likes to read the key in their own way then enable this token and define _OemActionReadKey function."
	TokenType = Boolean
	TargetMAK = Yes
	TargetH = Yes
End

TOKEN
	Name  = "SECONDARY_BOOT_FROM_ENABLED_DEVICES"
	Value  = "0"
	Help  = "0-> Loads \EFI\BOOT\BOOT{machine type short-name}.EFI from any of the devices & 1-> Loads the default image only from enabled devices"
	TokenType = Boolean
	TargetMAK = Yes
	TargetH = Yes
End

TOKEN
	Name  = "AMITSE_SUBPAGE_AS_ROOT_PAGE_LIST_SUPPORT"
	Value  = "1"
	Help  = "1 -> Shows subpages as root page & 0 -> Shows subpages as is"
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "AMITSE_HIDE_ROOT_PAGE"
	Value  = "1"
	Help  = "1 -> Hides the root page & 0 -> The support is disabled"
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_CheckIsAllowedPasswordChar"
	Value  = "0"
	Help  = "Set to 1 if OEM wants to Override Checking the input Characters with Customized character list for Password/string Controls and for post passwords.The override function is CheckIsAllowedPasswordChar. If 0 TSE will handle this case."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_PopupPasswordFormCallback"
	Value  = "0"
	Help  = "Set to 1 if OEM wants to Override handling the entire operation for password interactive controls[Drawing password window/Getting password/validating]. The override function is PopupPasswordFormCallback.If 0 TSE will handle this case."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_PopupPwdHandleActionOverRide"
	Value  = "0"
	Help  = "Override to handle the password action behavior for key and mouse. This is specific to ESA, OEM can't override this Token"
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_PasswordCheckInstalled"
	Value  = "0"
	Help  = "Set to 1 if OEM wants to override checking if the POST system passwords are Installed or not. If any password is installed, return the type of password installed. The override function is PasswordCheckInstalled. If 0 TSE will handle this case."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_PasswordAuthenticate"
	Value  = "0"
	Help  = "Set to 1 if OEM wants to override validating the POST system passwords. OEM can return type of password installed, based on this system Access level will be set.The override function is PasswordAuthenticate.If 0 TSE will handle this case."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_PasswordUpdate"
	Value  = "0"
	Help  = "Set to 1 if OEM wants to override encoding/updating password for their own controls. OEM need to create an ELINK for password control to specifies whether to encode the password or not.ELINK contains <FormSetGuide>,<Key>,<Flags>.The override function is PasswordUpdate.If 0 TSE will handle this case."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_PasswordCommitChanges"
	Value  = "0"
	Help  = "Set to 1 if OEM wants to override performing OEM specfic operation while saving the password in Nvram/TSE cache.This function will be called for load previous values/restoring defaults/save values.The override function is PasswordCommitChanges.If 0 TSE will handle this case."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_PopupPasswordCheckInstalled"
	Value  = "0"
	Help  = "Set to 1 if OEM wants to override checking inside the setup if the password is already installed or not to decide whether to show old (or)new password prompt.The override function is PopupPasswordCheckInstalled.If 0 TSE will handle this case."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_PopupPasswordAuthenticate"
	Value  = "0"
	Help  = "Set to 1 if OEM wants to override validating the old password inside the setup. Based on this return value,TSE will show new password prompt(or)invalid password message box.the override function is PopupPasswordAuthenticate.If 0 TSE will handle this case."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_NoVarStoreSupport"
	Value  = "0"
	Help  = "Set to 1 if OEM wants to override the NoVarStoreSupport function from Board module. Obsolete."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_NoVarStoreUpdateSystemAccess"
	Value  = "0"
	Help  = "Set to 1 if OEM wants to override the NoVarStoreUpdateSystemAccess function from Board module. Obsolete."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_ItkSupport"
	Value  = "0"
	Help  = "Set to 1 if OEM wants to override the ItkSupport function from Board module. Obsolete."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_BbsItkBoot"
	Value  = "0"
	Help  = "Set to 1 if OEM wants to override the BbsItkBoot function from Board module. Obsolete."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_GetAMITSEVariable"
	Value  = "0"
	Help  = "Set to 1 if OEM wants to override getting the post system password variable. OEM can have their own variable for the system password.The override function is GetAMITSEVariable.If 0 TSE will handle this case."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_GetBootTimeOut"
	Value  = "0"
	Help  = "Set to 1 if OEM wants to override system Boot timeout value.Post screen will wait for any key based on boot timeout value.The override function is GetBootTimeOut.If 0 TSE will handle this case."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_VarBuildItkDefaults"
	Value  = "0"
	Help  = "Set to 1 if OEM wants to override the VarBuildItkDefaults function from Board module. Obsolete."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_SetSystemAccessValueItk"
	Value  = "0"
	Help  = "Set to 1 if OEM wants to override the SetSystemAccessValueItk function from Board module. Obsolete."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_FindVarFromITKQuestionId"
	Value  = "0"
	Help  = "Set to 1 if OEM wants to override the FindVarFromITKQuestionId function from Board module. Obsolete."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_IsOEMLogoType"
	Value  = "0"
	Help  = "Set to 1 if OEM wants to override checking whether input image is OEM logo type or not. If returns TRUE, OEM logo will be displayed, in post else TSE default logo will be displayed.The override function is IsOEMLogoType.If 0 TSE will handle this case."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_ConvertOEMFormatToUgaBlt"
	Value  = "0"
	Help  = "Set to 1 if OEM wants to override converting OEM formatted image to UGABlt buffer.The converted UgaBlt will be displayed as post logo.The override function is ConvertOEMFormatToUgaBlt.If 0 TSE will handle this case."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_CleanUpOEMLogo"
	Value  = "0"
	Help  = "Set to 1 if OEM wants to override Cleaning memory allocated for OEM logo.The override function is CleanUpOEMLogo.If 0 TSE will handle this case."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_DoOEMLogoAnimate"
	Value  = "0"
	Help  = "Set to 1 if OEM wants to override Animating the OEM logo[GIF image]. OEM has to create a timer with required interval to refresh the logo.The override function is DoOEMLogoAnimate.If 0 TSE will handle this case."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_BBSBuildName"
	Value  = "0"
	Help  = "Set to 1 if OEM wants to override constructing BBS legacy devices name which will be shown in UI.The override function is BBSBuildName.If 0 TSE will handle this case."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_BBSGetNonStandardGroupType"
	Value  = "0"
	Help  = "Set to 1 if OEM wants to override providing the string token value for non standard legacy device group type.The override function is BBSGetNonStandardGroupType.If 0 TSE will handle this case."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_FramePwdCallbackIdePasswordUpdate"
	Value  = "0"
	Help  = "Set to 1 if OEM wants to override performing OEM specific operation on HDD password.The override function is FramePwdCallbackIdePasswordUpdate.If 0 HDD module will handle this case. "
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_PopupPwdAuthenticateIDEPwd"
	Value  = "0"
	Help  = "Set to 1 if OEM wants to override handling HDD password operations[checking password already installed,getting password from user, validating the entered password].The override function is PopupPwdAuthenticateIDEPwd.If 0 TSE module will handle showing password popup and HDD module will handle validating password."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_CheckForIDEPasswordInstalled"
	Value  = "0"
	Help  = "Set to 1 if OEM wants to override verifying whether a password is already installed or not.Based on return status TSE will decide whether to show popup for entering current password or New password.The override function is CheckForIDEPasswordInstalled.If 0 HDD module will handle this case."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_PopupPwdUpdateIDEPwd"
	Value  = "0"
	Help  = "Set to 1 if OEM wants to override encoding/updating HDD password[master/user] in setup.The override function is PopupPwdUpdateIDEPwd.If 0 HDD module will handle this case."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_TSEIDEPasswordGetName"
	Value  = "0"
	Help  = "Set to 1 if OEM wants to override providing name[string token value] for HDD.The override function is TSEIDEPasswordGetName.If 0 HDD module will handle this case."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_TSEIDEPasswordAuthenticate"
	Value  = "0"
	Help  = "Set to 1 if OEM wants to override validating the user provided password for HDD in setup.Based on return status TSE will show new/invalid password popup.The override function is TSEIDEPasswordAuthenticate.If 0 HDD module will handle this case."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_TSEIDEPasswordUpdate"
	Value  = "0"
	Help  = "Set to 1 if OEM wants to override encoding/updating password for HDD.The override function is TSEIDEPasswordUpdate.If 0 HDD module will handle this case."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_TSEIDEPasswordGetDataPtr"
	Value  = "0"
	Help  = "Set to 1 if OEM wants to override getting and returning HDD module data to TSE.The override function is TSEIDEPasswordGetDataPtr.If 0 TSE will handle this case."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_TSEIDEPasswordGetLocked"
	Value  = "0"
	Help  = "Set to 1 if OEM wants to override getting the status of HDD whether it is locked or not.The override function is TSEIDEPasswordGetLocked.If 0 TSE will handle this case."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_TSEIDEPasswordCheck"
	Value  = "0"
	Help  = "Set to 1 if OEM wants to override the TSEIDEPasswordCheck function from Board module."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_TSEIDEPasswordFreezeDevices"
	Value  = "0"
	Help  = "Set to 1 if OEM wants to override freezing the HDD device.The override function is TSEIDEPasswordFreezeDevices.If 0 HDD will handle this case. "
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_TSEUnlockHDD"
	Value  = "0"
	Help  = "set to 1 if oem wants to override unlocking the HDD device.The override function is TSEUnlockHDD.If 0 HDD will handle this case. "
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_TSESetHDDPassword"
	Value  = "0"
	Help  = "Set to 1 if OEMwants to override setting HDD password.The override function is TSESetHDDPassword.If 0 HDD will handle this case. "
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_TSEIDEUpdateConfig"
	Value  = "0"
	Help  = "Set to 1 if OEM wants to override updating HDD variable data.The override function is TSEIDEUpdateConfig.If 0 HDD will handle this case."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_OEMSpecialGetControlCount"
	Value  = "0"
	Help  = "Set to 1 if OEM wants to override returing the OEM special control count.Based on return value TSE will display OEM special controls.The override function is OEMSpecialGetControlCount.If 0 TSE will handle this case."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_OEMSpecialOneOfFixup"
	Value  = "0"
	Help  = "Set to 1 if OEM wants to override creating dynamic OEM special controls for oneof. The override function is OEMSpecialOneOfFixup.If 0 TSE will handle this case."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_OEMSpecialUpdateOneOf"
	Value  = "0"
	Help  = "Set to 1 if OEM wants to override updating the OEM variable for selected option.The override function is OEMSpecialUpdateOneOf.If 0 TSE will handle this case. "
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_OEMSpecialGotoFixup"
	Value  = "0"
	Help  = "Set to 1 if OEM wants to override setting the prompt and help string for the dynamically created OEM controls.The override function is OEMSpecialGotoFixup.If 0 TSE will handle this case."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_OEMSpecialGotoSelect"
	Value  = "0"
	Help  = "Set to 1 if OEM wants to override creating dynamic control for selected submenu page.The override function is OEMSpecialGotoSelect.If 0 TSE will handle this case."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_TSEMouseInitHook"
	Value  = "0"
	Help  = "Set to 1 if OEM/Modules wants to override performing any operation once mouse initialization done.The override function is TSEMouseInitHook.If 0 TSE will handle this case."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_TSEMouseStopHook"
	Value  = "0"
	Help  = "Set to 1 if OEM/Modules wants to override performing any operation once mouse stops.The override function is TSEMouseStopHook.If 0 TSE will handle this case."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_TSEMouseDestoryHook"
	Value  = "0"
	Help  = "Set to 1 if OEM/Modules wants to override performing any operation once mouse destroyed.The override function is TSEMouseDestoryHook.If 0 TSE will handle this case."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_TSEMouseRefreshHook"
	Value  = "0"
	Help  = "Set to 1 if OEM/Modules wants to override performing any operation once mouse refreshed.The override function is TSEMouseRefreshHook.If 0 TSE will handle this case."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_TSEMouseStartHook"
	Value  = "0"
	Help  = "Set to 1 if OEM if oem wants to override performing any operation once mouse start.The override function is TSEMouseStartHook.If 0 TSE will handle this case."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_TSEMouseIgnoreMouseActionHook"
	Value  = "0"
	Help  = "Set to 1 if OEM wants to override Ignoring the Mouse action in TSE.OEM can get the action and perform their operations.The override function is TSEMouseIgnoreMouseActionHook.If 0 TSE will handle this case."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_TSEStringReadLoopEntryHook"
	Value  = "0"
	Help  = "Set to 1 if OEM wants to override showing/activating the softkbd layout for password/string/numeric controls.The override function is TSEStringReadLoopEntryHook.If 0 SoftKbd will handle this case."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_TSEStringReadLoopExitHook"
	Value  = "0"
	Help  = "Set to 1 if OEM wants to override close/deactivate the softkbd layout for password/string/numeric controls.The override function is TSEStringReadLoopExitHook.If 0 SoftKbd will handle this case. "
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_GetMessageboxColorHook"
	Value  = "0"
	Help  = "Set to 1 if OEM wants to override the color of message box. The override function is GetMessageboxColorHook.If 0 TSE will handle this case."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_GOPSetScreenResolutionHook"
	Value  = "0"
	Help  = "Set to 1 if OEM wants to override setting screen resolution for GOP.The override function is GOPSetScreenResolutionHook.If 0 TSE will handle this case."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_LaunchHotKeyBootOption"
	Value  = "0"
	Help  = "Set to 1 if OEM wants to override booting into boot options based on key pressed in POST.The override function is LaunchHotKeyBootOption.If 0 TSE will handle this case."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_DriverHealthSystemReset"
	Value  = "0"
	Help  = "Set to 1 if OEM wants to override performing OEM operations when driver health status is reset required. The override function is DriverHealthSystemReset.If 0 TSE will handle this case."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_UefiBootFailHook"
	Value  = "0"
	Help  = "Set to 1 if OEM wants to override performing OEM operation on UEFI loadimage fails. The override function is UefiBootFailHook.If 0 TSE will handle this case."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_LegacyBootFailHook"
	Value  = "0"
	Help  = "Set to 1 if OEM wants to override performing OEM operation on Legacy boot option fails. The override function is LegacyBootFailHook.If 0 TSE will handle this case."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_UpdateNumericDisplayString"
	Value  = "0"
	Help  = "Set to 1 if OEM wants to override dispaying OEM style format for numeric controls.The override function is UpdateNumericDisplayString.If 0 TSE will handle this case."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_MainSetupLoopHook"
	Value  = "0"
	Help  = "Override to show Graphical setup. This is specific to ESA. OEM can't override this HOOK."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_MainSetupLoopInitHook"
	Value  = "0"
	Help  = "Overrides by ESA to avoid text mode operations. OEM can't override this HOOK."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_ProcessBrowserActionRequestHook"
	Value  = "0"
	Help  = "Performing current Browser Action. This is specific to ESA. OEM can't override this HOOK"
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_OEMCheckControlCondition"
	Value  = "0"
	Help  = "Set to 1 if OEM wants to override OEM specific control condition for suppress/grayout/disable the control.The override function is OEMCheckControlCondition.If 0 TSE will handle this case."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_GetUefiSpecVersion"
	Value  = "0"
	Help  = "Set to 1 if OEM wants to override current specification version for callback processing. This token is relevant to UEFI 2.3 specification and is now obsolete."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_TSEMouseInit"
	Value  = "0"
	Help  = "Set to 1 if OEM wants to override initializing the mouse.The override function is TSEMouseInit.If 0 MouseDriver will handle this case."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_TSEMouseStop"
	Value  = "0"
	Help  = "Set to 1 if OEM wants to override stopping the mouse.The override function is TSEMouseStop.If 0 MouseDriver will handle this case."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_TSEIsMouseClickedonSoftkbd"
	Value  = "0"
	Help  = "Set to 1 if OEM wants to override checking the Mouse is clicked on softkbd or not.The override function is TSEIsMouseClickedonSoftkbd.If 0 TSE will handle this case. "
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_TSEMouseRefresh"
	Value  = "0"
	Help  = "Set to 1 if OEM wants to override Refreshing the mouse.The override function is TSEMouseRefresh.If 0 MouseDriver will handle this case."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_TSEMouseStart"
	Value  = "0"
	Help  = "Set to 1 if OEM wants to override stopping the mouse.The override function is TSEMouseStart.If 0 MouseDriver will handle this case."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_TSEMouseFreeze"
	Value  = "0"
	Help  = "Set to 1 if OEM wants to override freezing the mouse.The override function is TSEMouseStart.If 0 MouseDriver will handle this case."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_TSEGetCoordinates"
	Value  = "0"
	Help  = "Set to 1 if OEM wants to override mouse pointer coordinates. The override function is TSEGetCoordinates.If 0 MouseDriver will handle this case. "
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_TSEMouseReadInfo"
	Value  = "0"
	Help  = "set to 1 if OEM wants to override returning mouse pointer Info.The override function is TSEMouseReadInfo.If 0 MouseDriver will handle this case."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_TSEMouseDestroy"
	Value  = "0"
	Help  = "Set to 1 if OEM wants to override destroying the mouse.The override function is TSEMouseStart.If 0 MouseDriver will handle this case."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_TSEGetactualScreentop"
	Value  = "0"
	Help  = "Set to 1 if OEM wants to override the current screen top coordinates. The override function is TSEGetactualScreentop.If 0 MouseDriver will handle this case. "
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_TSENumericSoftKbdInit"
	Value  = "0"
	Help  = "Set to 1 if OEM wants to override showing/activating softkbd for numeric controls.The override function is TSENumericSoftKbdInit.If 0 Softkbd will handle this case."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_TSENumericSoftKbdExit"
	Value  = "0"
	Help  = "Set to 1 if OEM wants to override closing/deactivating softkbd for numeric controls.The override function is TSENumericSoftKbdExit.If 0 Softkbd will handle this case."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_LaunchSecondaryBootPath"
	Value  = "0"
	Help  = "Set to 1 if OEM wants to override launching the Boot option from Default file path.The override function is LaunchSecondaryBootPath.If 0 TSE will handle this case."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_OsUpdateCapsuleWrap"
	Value  = "0"
	Help  = "Set to 1 if OEM wants to override displaying the capsule update string and initiating the capsule update from OS.The override function is OsUpdateCapsuleWrap.If 0 TSE will handle this case."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_UIUpdateCallbackHook"
	Value  = "0"
	Help  = "Updateing UI based on New/Add IFR packs.This is specific to ESA. OEM can't override this Hook."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_FixMergePagesExtraHook"
	Value  = "0"
	Help  = "Fixup the control info which was preserved/used before updating the hii pack.This is specific to ESA. OEM can't override this Hook."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_PageRemoveHook"
	Value  = "0"
	Help  = "Remove page contents on processing hii remove pack. This is specific to ESA. OEM can't override this Hook."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_ProcessPackNotificationHook"
	Value  = "0"
	Help  = "Process IFR notification to add/del/new IFR inside setup.This is specific to ESA. OEM can't override this Hook."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_SaveSetupGobalDataHook"
	Value  = "0"
	Help  = "Take the backup of global variables for ESA before showing the sendform.This is specific to ESA. OEM can't override this Hook."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_RestoreSetupGobalDataHook"
	Value  = "0"
	Help  = "Restore the global variables after sendform completed.This is specific to ESA. OEM can't override this Hook."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_CsmBBSBootOptionName"
	Value  = "0"
	Help  = "Set to 1 if OEM wants to override Legacy boot option name.The override function is CsmBBSBootOptionName.If 0 TSE will handle this case."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "MSGBOX_PROGRESS_BAR_SEGMENT_COUNT"
	Value  = "20"
	Help  = "Mod of 100 with this number should be 0, for example (100 % 20 = 0)."
	TokenType = Integer
	TargetH = Yes
End

TOKEN
	Name  = "CONTRIB_BGRT_TABLE_TO_ACPI"
	Value  = "1"
	Help  = "Set to Contribute the BGRT table to ACPI."
	TokenType = Integer
	TargetH = Yes
End

TOKEN
	Name  = "BIOS_SIGNON_MESSAGE2"
	Value  = "BIOS Date: $(TODAY) $(NOW) Ver: $(PROJECT_TAG)$(PROJECT_MAJOR_VERSION)$(PROJECT_MINOR_VERSION)"
	Help  = "BIOS Sign On Message"
	TokenType = Expression
	TargetMAK = Yes
	TargetH = Yes
End

TOKEN
	Name  = "TSE_APTIO_5_SUPPORT"
	Value  = "1"
	Help  = "Turn on to to build under Aptio 5"
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "TSE_USE_GETGYLPH_PRINTLENGH"
	Value  = "1"
	Help  = "Turn on to to build under Aptio 5"
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "INI_FILE_PATH"
	Value  = "$(TSEBIN_DIR)/Uefisetup.ini"
	TokenType = Expression
	TargetMAK = Yes
End

TOKEN
	Name  = "SETUP_HIDE_DISABLE_BOOT_OPTIONS"
	Value  = "0"
	Help  = "1 => Hide the disabled boot options in boot override menu. 0 => Shows all boot options boot override menu."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "POPUP_MENU_HIDE_DISABLE_BOOT_OPTIONS"
	Value  = "0"
	Help  = "1 => Hide the disabled boot options in BBS POPup menu. 0 => Shows all boot options in BBS POPup menu."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "TSE_LOAD_OPTION_HIDDEN"
	Value  = "1"
	Help  = "1 => Hide LOAD_OPTION_HIDDEN Boot option. 0 => Shows all boot options."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "SETUP_HIDE_BIOS_SIGNON_MESSAGE2"
	Value  = "0"
	Help  = "1 => Hides the BIOS signon message. 0 => Shows the BIOS sign on message."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "AMITSE_VERSION"
	Value  = "Version %x.%02x.%04x."
	Help  = "TSE Version for displaying in the init screen. If no need of version to display then use empty string, if changing the format specifiers then care should be taken in source."
	TokenType = Expression
	TargetMAK = Yes
	TargetH = Yes
End

TOKEN
	Name  = "BOOT_FLOW_NORMAL_LAUNCH_DEFAULT_BOOTIMAGE"
	Value  = "1"
	Help  = "Support for UEFI specification v 2.3.1 section 3.4.1.1 and 3.4.1.2 to load the default boot image (efi\boot\boot####.efi) from any of the available file system if no boot option found. 1 = Enabling default image boot and 0 = Disabling default image boot."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "BOOT_FLOW_NORMAL_INFINITE_LOOP"
	Value  = "0"
	Help  = "1 = TSE tries to loads all the boot options and all fails checks for SETUP_ENTRY keys if found then enters the setup else TSE tries to load all the boot options once again and continues the mentioned procedure infinitely and 0 = Neglects the SETUP_ENTRY key check, always tries to load all the boot options infinitely."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "STYLE_HELP_AREA_SCROLLBAR"
	Value  = "0"
	Help  = "Support Scrollable Help Text"
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "TSE_MULTILINE_CONTROLS"
	Value  = "0"
	Help  = "Turns on multi line controls. Currently subtitle and static text controls are supported. Default is DISABLE"
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "TSE_ROMHOLE_SUPPORT"
	Value  = "0"
	Help  = "Enable to support ROMHOLE generation."
	TokenType = Boolean
	TargetMAK = Yes
	TargetH = Yes
End

TOKEN
	Name  = "TSE_ROMHOLE_SUPPORT"
	Value  = "1"
	Help  = "Enable to support ROMHOLE generation. Default enable with secure boot module support"
	TokenType = Boolean
	TargetMAK = Yes
	TargetH = Yes
	Token = "SecureMod_SUPPORT" "=" "1"
End

TOKEN
	Name  = "TSE_OEM_POSTLOGO_SUPPORT"
	Value  = "0"
	Help  = "Enable to support OEMLogo image in postscreen."
	TokenType = Boolean
	TargetMAK = Yes
	TargetFDF = Yes
	TargetH = Yes
End


TOKEN
	Name  = "TEXT_EXCESS_SUPPORT"
	Value  = "0"
	Help  = "0 default , if 1 then  string will we adjusted on whole width of the frame on condition right side of frame have no strings and string is exceeding from frame "
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "BOOT_TO_IMAGE_CODE_TYPE_SUPPORT"
	Value  = "1"
	Help  = "1 default ,if 0 then it will boot any boot option type if 1 then boot option on the basis of image code type(Application) if match then only boot"
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OEMLogo_FILE_PATH"
	Value  = "AmiTsePkg/Core/em/AMITSE/OEMLogo.bmp"
	TokenType = Expression
	TargetMAK = Yes
	TargetFDF = Yes
	Token = "TSE_OEM_POSTLOGO_SUPPORT" "=" "1"
End
TOKEN
	Name = "OEMLOGO_UI_FILE_NAME"
	Value = "OEMLogo.bmp"
	Help  = "Token to display the oem logo name in change logo utility"
	TokenType = Expression
	TargetMAK = Yes
	TargetFDF = Yes
End

TOKEN
	Name  = "LOGO_FILE_NAME"
	Value  = "AmiTsePkg/Core/em/AMITSE/Logo.bmp"
	TokenType = Expression
	TargetMAK = Yes
	TargetFDF = Yes
End

TOKEN
	Name = "LOGO_UI_FILE_NAME"
	Value = "Logo.bmp"
	Help  = "Token to display the quiet boot logo name in change logo utility"
	TokenType = Expression
	TargetMAK = Yes
	TargetFDF = Yes
End

TOKEN
	Name  = "TSE_ROMHOLE_MAKFILE_GUID"
	Value  = "05ca020b-0fc1-11dc-9011-00173153eba8"
	Help  = "One among 16-GUID used to identify ROMHOLE by AMI utilities such as AFU, BCP, and MMTool. If TSE_ROMHOLE_MAKFILE_GUID token value is changed then TSE_ROMHOLE_HEADER_GUID token value should update "
	TokenType = Expression
	TargetMAK = Yes
	TargetFDF = Yes
	TargetH = Yes
End

TOKEN
	Name  = "TSE_ROMHOLE_HEADER_GUID"
	Value  = "{0x05ca020b, 0x0fc1, 0x11dc, 0x90, 0x11, 0x00, 0x17, 0x31, 0x53, 0xeb, 0xa8}"
	Help  = "One among 16-GUID used to identify ROMHOLE by AMI utilities such as AFU, BCP, and MMTool. This value should sync with TSE_ROMHOLE_MAKFILE_GUID token value"
	TokenType = Expression
	TargetH = Yes
End

TOKEN
	Name  = "ROMHOLE_BLOCK_SIZE"
	Value  = "0x10000"
	Help  = "Size of Block used for ROMHOLE"
	TokenType = Integer
	TargetMAK = Yes
	TargetH = Yes
End

TOKEN
	Name  = "ROMHOLE_NUMBER_OF_BLOCK"
	Value  = "2"
	Help  = "Number of Block used for ROMHOLE"
	TokenType = Integer
	TargetMAK = Yes
	TargetH = Yes
End

TOKEN
	Name  = "TSE_CALLBACK_SPEC_VERSION"
	Value  = "0"
	Help  = "Version to change the callback functionality"
	TokenType = Integer
	TargetMAK = Yes
End

TOKEN
	Name  = "OSIndication_SUPPORT"
	Value  = "1"
	Help  = "Main token to disable or enable the OSIndication Support. If disable then OSIndication module can be used"
	TokenType = Boolean
	TargetEQU = Yes
	TargetMAK = Yes
	TargetH = Yes
End

TOKEN
	Name  = "SETUP_DELAY_LOGO_TILL_INPUT"
	Value  = "0"
	Help  = "DISABLE is default. 1 => delays logo display untill SIMPLE TEXT IN protocol is available.0 => logo is displayed as soon as UGA DRAW, CONSOLE SPLITTER & SIMPLE TEXT OUT IS AVAILABLE (Will increase code size)."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "SETUP_DELAY_POST_TILL_GOP"
	Value  = "1"
	Help  = "ENABLE is default.Wait for GOP"
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "DRAW_POST_LOGO_AT_0POS"
	Value  = "0"
	Help  = "Displays the post logo at top(0,0) graphics position. Disable by default make it 1 to avail this feature"
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "TSE_IGNORE_KEY_FOR_FASTBOOT"
	Value  = "0"
	Help  = "DISABLE is default. 1=> To ignore check for key when FastBoot is enabled. 0=> Allow check for key when FastBoot is enabled"
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "TSE_CURSOR_SUPPORT"
	Value  = "1"
	Help  = "Token to display cursor for string, password type controls.ENABLE is default.1=>To display cursor in TSE.0=>Not to display cursor in TSE"
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "SUPPORT_ESRT"
	Value  = "1"
	Help  = "Enable to support ESRT"
	TokenType = Boolean
	TargetH = Yes
	Token = "CORE_COMBINED_VERSION" ">=" "0x4028e"
End

TOKEN
	Name  = "TSE_SUPPORT_NATIVE_RESOLUTION"
	Value  = "1"
	Help  = "Sets the graphics mode for quiet boot from EDID. 1 - Defaultly enable make 0 to disable the feature"
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "BOOT_OVERRIDE_BOOTNEXT_VARIABLE_FEATURE"
	Value  = "0"
	Help  = "DISABLE is default.1=> To show menu for BootOverride options to modifiy BootNext variable when BootNext variable is supported by project. 0=> Not to show menu for BootOverride options"
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "TSE_SUPPRESS_MULTILINE_FOR_ONEOFLABEL"
	Value  = "0"
	Help  = "1=> is to suppress multiline support for one of option . 0=> is to support multiline for one of option which is defalut behaviour"
	TokenType = Boolean
	TargetH = Yes
	Token = "TSE_MULTILINE_CONTROLS" "=" "1"
End

TOKEN
	Name  = "SETUP_SAVE_PSWD_TO_NVRAM"
	Value  = "0"
	Help  = "1 => Save password to Nvram. 0 => Save password to cache."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "TSE_DONOT_LOAD_PASSWORD_ON_DEFAULTS"
	Value  = "0"
	Help  = "1 => Will not load defaults for password when we press F3. 0 => Load default passowrd."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "SHELL_TEXT_MODE"
	Value  = "0xFF"
	Help  = "Assign the GC_MODE while boot to SHELL.\0xFF = ignored, 0/1/2/.. = GC_MODE0/GC_MODE1/GC_MODE2/.."
	TokenType = Integer
	TargetH = Yes
End

TOKEN
	Name  = "FLUSH_KEYS_AFTER_READ"
	Value  = "1"
	Help  = "Disable to flush the key buffer."
	TokenType = Boolean
	TargetMAK = Yes
	TargetH = Yes
End

TOKEN
	Name  = "TSE_LOAD_DEFAULTS_FROM_DEFAULTS_BUFFER"
	Value  = "1"
	Help  = "0 => Will not load defaults from Default buffer(NVRAM.bin) on pressing F3. 1 => Will Load default from the default buffer."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "AMITSE_ROOT_PAGE_ORDER_SUPPORT"
	Value  = "1"
	Help  = "1 => Enable the  Root Page Order support for TSE. 0 => Disable the  Root Page Order support for TSE."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "SETUP_ROOT_PAGE_ORDER_GUID"
	Value  = "  { 0x9204ecbe, 0xa665, 0x49d3,  0x86, 0xde, 0x8, 0x12, 0x99, 0xe2, 0x23, 0xef }"
	Help  = "Setup root Page Order Guid"
	TokenType = Expression
	TargetH = Yes
End

TOKEN
	Name  = "SETUP_GO_TO_EXIT_PAGE_ON_EXIT_KEY"
	Value  = "0"
	Help  = "DISABLE is default.Set to ENABLE to goto Exit page on pressing ESC key. If Enabled, on Pressing ESC key, by default it will go to Exit page.If user needs to change the page then user has provide proper FormID in the dependency tokens"
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "EXIT_PAGE_GUID"
	Value  = "{0x7B59104A, 0xC00D, 0x4158, 0x87, 0xFF, 0xF0, 0x4D, 0x63, 0x96, 0xA9, 0x15}"
	Help  = "GUID used to identify exit page"
	TokenType = Expression
	TargetH = Yes
	Token = "SETUP_GO_TO_EXIT_PAGE_ON_EXIT_KEY" "!=" "0"
End

TOKEN
	Name  = "EXIT_PAGE_CLASS"
	Value  = "0x1"
	Help  = "Exit Page Formset class"
	TokenType = Integer
	TargetH = Yes
	Token = "SETUP_GO_TO_EXIT_PAGE_ON_EXIT_KEY" "!=" "0"
End

TOKEN
	Name  = "EXIT_PAGE_SUB_CLASS"
	Value  = "0"
	Help  = "Exit Page Formset Subclass"
	TokenType = Integer
	TargetH = Yes
	Token = "SETUP_GO_TO_EXIT_PAGE_ON_EXIT_KEY" "!=" "0"
End

TOKEN
	Name  = "EXIT_PAGE_FORM_ID"
	Value  = "EXIT_MAIN"
	Help  = "Exit Page ID"
	TokenType = Expression
	TargetH = Yes
	Token = "SETUP_GO_TO_EXIT_PAGE_ON_EXIT_KEY" "!=" "0"
End

TOKEN
	Name  = "TSE_SHOW_PROMPT_STRING_AS_TITLE"
	Value  = "0"
	Help  = "0 is DEFAULT.1 => To use password control's prompt's string  for Password Title. 0 => To use standard TSE string for Password Title."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "TSE_DONOT_LOAD_SYSTEM_ACCESS_FOR_USER_DEFAULT"
	Value  = "0"
	Help  = "0 is DEFAULT.1 => To enable to not to load SystemAccess variable on pressing Restore User Default. 0=> To load SystemAccess variable on pressing Restore User Default"
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "SHOW_FORMSETS_WITH_CLASSGUID"
	Value  = "1"
	Help  = "1 is DEFAULT.1 => To display formset based on formset ClassGUID in elink AMITSE_FILTER_CLASSGUID_FORMSETS(By default this elink will have EFI_HII_PLATFORM_SETUP_FORMSET_GUID and EFI_HII_DRIVER_HEALTH_FORMSET_GUID). 0 => To display all formset and no filter in formsets."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "TSE_DBG_DISABLE_APPDESTRUCTOR"
	Value  = "0"
	Help  = "0 => Free the TSE used memory. 1 => Won't free the TSE used memory, may be used only for debugging purposes. CAUTION: If making the token to 1 then TSE won't free the memory it used. We recommend not to make it enable."
	TokenType = Boolean
	TargetH = Yes
	Token = "DEBUG_MODE" "=" "1"
End

TOKEN
	Name  = "TSE_HASH_PASSWORD"
	Value  = "1"
	Help  = "1 is Default. 1 => To encode the entered password using hash algorithm. Make it enabled only when cryptopkg or amicryptopkg is available. 0 => Encode entered password using TSE logic."
	TokenType = Boolean
	TargetMAK = Yes
	TargetH = Yes
End

TOKEN
	Name  = "TSE_PWD_ENCRYPT_USING_SHA256"
	Value  = "1"
	Help  = "1 is Default. 1 => To use SHA256 algorithm to encode the password. 0 => Use SHA1 algorithm to encode the password"
	TokenType = Boolean
	TargetMAK = Yes
	TargetH = Yes
	Token = "TSE_HASH_PASSWORD" "=" "1"
End

TOKEN
	Name  = "AMITSE_SUPPRESS_DYNAMIC_FORMSET"
	Value  = "0"
	Help  = "0 is Default. 1 -> To suppress dynamic formset mentioned in elink AMITSE_SUPPRESS_DYNAMIC_FORMSET_LIST and do not show in setup. 0 -> Display dynamic page and not to suppress dynamic page"
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "SUPPRESS_HANDLE_FOR_VAR_CREATION"
	Value  = "0"
	Help  = "0 is DEFAULT.0 => Includes handle comparison to create new variable cache in TSE. 1 => Won't compare handle to create new variable. The variable detail should present in AMITSE_DYNAMICPARSING_HANDLE_SUPPRESS_LIST to not compare handle"
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "TSE_BUILD_AS_APPLICATION"
	Value  = "0"
	Help  = "0 => Includes TSE in output image, for normal boot process. 1 => Builds TSE as application. Wont't include in output image. Need TSE source to avail this feature"
	TokenType = Boolean
	TargetMAK = Yes
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_GetGraphicsBitMapFromFV"
	Value  = "0"
	Help  = "set to 1 if OEM wants to override reading image data from FV.Based on FileNameGuid oem can send the corresponding Image and Image Size.the override function is GetGraphicsBitMapFromFV.If 0 TSE will handle this case."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_CheckAdvShiftState"
	Value  = "0"
	Help  = "Set to 1 if OEM wants to override handling advanced shiftstate keys behavior for Hot keys/OEM keys.the override function is CheckAdvShiftState.If 0 TSE will handle this case."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_LaunchSecBootPathFromEnabledDevs"
	Value  = "0"
	Help  = "Set to 1 if OEM wants to override launching the Boot option from enabled devices.the override function is LaunchSecBootPathFromEnabledDevs.If 0 TSE will handle this case."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_FramePasswordAdvancedCallback"
	Value  = "0"
	Help  = "Set to 1 if OEM wants to perform OEM specific action for password controls.the override function is FramePasswordAdvancedCallback.If 0 TSE will handle this case."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_TseLaunchFileSystem"
	Value  = "0"
	Help  = "Set to 1 if OEM wants to override showing OEM specific File system. The override function is TseLaunchFileSystem.If 0 TSE will handle this case."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "TSE_DEFAULT_SETUP_PASSWORD_SUPPORT"
	Value  = "0"
	Help  = "0 is default.set 1=> to Enable default setup password"
	TokenType = Expression
	TargetMAK = Yes
	TargetH = Yes
End

TOKEN
	Name  = "DEFAULT_SETUP_PWD_AT_FIRSTBOOT_ONLY"
	Value  = "1"
	Help  = "1 is default. 1 => Sets the TSE_ADMIN_PASSWORD and TSE_USER_PASSWORD at first boot only. 0 => Sets TSE_ADMIN_PASSWORD and TSE_USER_PASSWORD in TSE defaults, on load defaults these data will be loaded"
	TokenType = Expression
	TargetMAK = Yes
	TargetH = Yes
	Token = "TSE_DEFAULT_SETUP_PASSWORD_SUPPORT" "=" "1"
End

TOKEN
	Name  = "TSE_ADMIN_PASSWORD"
	Value  ='"EMPTY_DATA"'
	Help  = "If default admin password is not required, it will not be set; in that case keep EMPTY_DATA as a default value. Otherwise, replace EMPTY_DATA with the new value of default admin password. Keep the double quotes - they are necessary to support special characters."
	TokenType = Expression
	TargetMAK = Yes
	TargetH = Yes
	Range =  "From PASSWORD_MIN_SIZE to SETUP_PASSWORD_LENGTH"
	Token = "TSE_DEFAULT_SETUP_PASSWORD_SUPPORT" "=" "1"
End

TOKEN
	Name  = "TSE_USER_PASSWORD"
	Value  = '"EMPTY_DATA"'
	Help  = "If default user password is not required, it will not be set; in that case keep EMPTY_DATA as a default value. Otherwise, replace EMPTY_DATA with the new value of default user password. Keep the double quotes - they are necessary to support special characters."
	TokenType = Expression
	TargetMAK = Yes
	TargetH = Yes
	Range =  "From PASSWORD_MIN_SIZE to SETUP_PASSWORD_LENGTH"
	Token = "TSE_DEFAULT_SETUP_PASSWORD_SUPPORT" "=" "1"
End

TOKEN
	Name  = "RT_ACCESS_SUPPORT_IN_HPKTOOL"
	Value  = "0"
	Help  = "0 is default. 0=> Not to set RT flag for Varstore variables. 1=> enable to add RT attribute for Varstore variables, uefisetup.ini attributes persists"
	TokenType = Expression
	TargetMAK = Yes
	TargetH = Yes
End

TOKEN
	Name  = "RT_ACCESS_FOR_EFIVARSTORE"
	Value  = "0"
	Help  = "0 is default. 0=> Not to set RT flag for EfiVarstore variables. 1=> enable to add RT attribute for Efivarstore variables, uefisetup.ini attributes persists. It is User's responsibility to secure the variable to which User providing RT attribute."
	TokenType = Expression
	TargetMAK = Yes
	TargetH = Yes
End

TOKEN
	Name  = "DISABLE_ESC_IN_BBS"
	Value  = "0"
	Help  = "0 is DEFAULT.1 => To disable ESC behaviour in BBS menu and retain in BBS menu. 0 => To enable ESC behaviour in BBS menu."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "TSE_FOR_EDKII_SUPPORT"
	Value  = "0"
	Help  = "0 is DEFAULT. TSE source support is mandatory. 0 => No support for building TSE in EDK project. 1 => Support to build TSE in EDK project"
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_ESAInitFvHook"
	Value  = "0"
	Help  = "ESA is using this token to load ESA.efi from the optional FV. OEM can't override this Hook."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_SetMessageBoxProgressType"
	Value  = "0"
	Help  = "Set to 1 if OEM wants to override deciding the OEM specific message box type for progrss bar.the override function is SetMessageBoxProgressType.If 0 TSE will handle this case."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_SetResAndScreenBufferHook"
	Value  = "0"
	Help  = "Set to 1 If OEM wants to override seting the required supported text mode.the override function is SetResAndScreenBufferHook.If 0 TSE will handle this case."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "TSE_RECALCULATE_LAYOUT_TO_MAX_RES"
	Value  = "0"
	Help  = "Default is 0. 1=> Sets the Max TextMode"
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "TSE_BEST_TEXT_GOP_MODE"
	Value  = "0"
	Help  = "0 is DEFAULT.1 => To save and restore text(100*31) and GOP(800*600) mode before using any TSE Interfaces in post/after TSE. 0 => Not to handle text and GOP mode before using any TSE interfaces in post/after TSE and use post mode without any change."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "TSE_SUPPORT_DEFAULT_FOR_STRING_CONTROL"
	Value  = "1"
	Help  = "1 is DEFAULT. 1 => To construct optimal and failsafe defaults for STRING type controls based on CONTROLPtr from controlInfo.0 => Not to construct and load optimal and failsafe defaults for STRING type controls."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "TSE_SUPPORT_WRITE_CHAR_LAST_ROW_COLUMN"
	Value  = "0"
	Help  = "0 is DEFAULT. 1 => To support writing a char in last row column without scrolling the screen.0 => Not to support writing a char in last row column without scrolling the screen"
	TokenType = Boolean
	TargetH = Yes
	Token = "AMI_MODULE_PKG_VERSION" ">=" "25"
End

TOKEN
	Name  = "TSE_FULL_SCREEN_POST_SUPPORT"
	Value  = "0"
	Help  = "0 is DEFAULT.1 => To set (100 x 31) text mode in post if (100 x 31) is available. 0 => Don't try to set (100 x 31) text mode continue with what is available."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "TSE_MASM_PATH"
	Value  = ""
	Help  = "Token to set the MASM path. If experiencing build error in command line then set the MASM path here. Path should terminated with slash eg.,$(CCX86DIR)/../"
	TokenType = Expression
	TargetMAK = Yes
	TargetH = Yes
End

TOKEN
	Name  = "TSE_MOUSE_POST_TRIGGER_TIME"
	Value  = "5000000"
	Help  = "0.5Sec => Default. The number of 100ns in which mouse event is checked in POST,"
	TokenType = Integer
	TargetMAK = Yes
	TargetH = Yes
End

TOKEN
	Name  = "TSE_SKIP_ORPHAN_BOOT_ORDER_VARIABLE"
	Value  = "0"
	Help  = "0 => Default. 1 => Skip to create TSE bootData if Boot#### variable not present in bootOrder. 0 => Create TSE bootData if Boot#### variable not present in bootOrder "
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "TSE_ISOLATE_SETUP_DATA"
	Value  = "1"
	Help  = "1 is Default. 1 => To Isolate SetupData in separate FFS. 0 => To maintain SetupData.bin and AMITSE.efi in one FFS"
	TokenType = Boolean
	TargetMAK = Yes
	TargetFDF = Yes
	TargetH = Yes
End

TOKEN
	Name  = "TSE_WAIT_FOR_KEY_EVENT_BEFORE_READ"
	Value  = "0"
	Help  = "0 is Default. 0 => Not-to-wait for any event to signalled before execution. 1=> To Stops execution until an event is signaled."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "DEFAULT_CONDITIONAL_EXPRESSION_SUPPORT"
	Value  = "0"
	Help  = "0 is Default. 0 => To skip evaluating default value for Conditional Expression 1=> To evaluating default value for Conditional Expression"
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "TSE_DISPLAY_FORMSET_PARSING_ERROR"
	Value  = "0"
	Help  = "0 is Default. 0 => Will not show formset parsing error to the user; 1 => Show the parsing error using Post Message box. The problematic formset won't be shown in either case."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "TSE_CACHE_PLATFORM_LANG"
	Value  = "0"
	Help  = "0 is Default. 0 =>Gets the Current System language From Nvram. 1=>Gets the Current System language From Cache variable and this cache variable will update on changing the System language With in TSE.However if some other module changes System Language,TSE will not know it."
	TokenType = Boolean
	TargetMAK = Yes
	TargetH = Yes
End

TOKEN
    Name   = "TSE_RECOVERY_SUPPORT"
    Value  = "0"
    Help   = "0 is Default. 1=>Enables OSRecovery and Platform Recovery feature in TSE. 2=>Disables Recovery feature in TSE"
    TokenType = Boolean
    TargetH = Yes
End

TOKEN
	Name  = "ESA_RECONNECT_SUPPORT"
	Value  = "1"
	Help  = "1 is Default. 0 => Not To support mantis 1194[EFI_IFR_FLAG_RECONNECT_REQUIRED] for ESA  1=> To support mantis 1194[EFI_IFR_FLAG_RECONNECT_REQUIRED] for ESA"
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "OVERRIDE_TSEBreakInteractiveBbsPopup"
	Value  = "0"
	Help  = "Default is 0. 1=> If OEM wants to override TSEBreakInteractiveBbsPopup function and not rely on TSE_BREAK_INTERACTIVE_BBS_POPUP token to break the BBS popup loop"
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "TSE_BREAK_INTERACTIVE_BBS_POPUP"
	Value  = "0"
	Help  = "0 is Default. 0 => To show BBS popup always interactively 1=> To break the interactive loop of BBS popup"
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "TSE_BOOT_TO_DISABLED_BOOT_OPTIONS"
	Value  = "0"
	Help  = "0=>Disabled legacy Boot Options are won't boot from BootOver Ride and BBS page 1=>Disabled legacy Boot Options will boot from BootOver ride and BBS page"
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "TSE_GOP_NOTIFICATION_SUPPORT"
	Value  = "1"
	Help  = "1 is Default. 0 => Do not install GOP notification processing.[Assumes GOP won't be updated.] 1=> Install and process GOP notifications"
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "TSE_DEVICE_PATH_TO_TEXT_PROTOCOL_SUPPORT"
	Value  = "0"
	Help  = "0 is Default. 0 => To convert Device Path to String using TSE function  1=> To convert Device Path to String using DevicePathtoText protocol."
	TokenType = Boolean
	TargetH = Yes
End

TOKEN
	Name  = "REPORT_MAPPING_ID_CONFLITCS_IN_FILE"
	Value  = "0"
	Help  = "0 is Default. 0=>Do not write the Missing/Duplicate Mapping Language strings into File 1=> Writes the Missing/Duplicate Mapping language strings into File"
	TokenType = Boolean
	TargetMAK = Yes
	TargetH = Yes
End

TOKEN
	Name  = "TSE_MAPPING_LANGUAGE_SKIP_NONSTORAGE_CONTROLS_CHECK"
	Value  = "0"
	Help  = "0 is Default. 0=>Do not Skip the Non Storage Controls for Duplicate Mapping String/different mapping strings for same Control 1=> Skip the Non Storage Controls for Duplicate Mapping String/different mapping strings for same Control"
	TokenType = Boolean
	TargetMAK = Yes
	TargetH = Yes
End

TOKEN
	Name  = "TSE_UEFI_26_FEATURES_SUPPORT"
	Value  = "1"
	Help  = "1 is Default. 0=> Disable UEFI 2.6 features that require interaction with external cards (which may not be UEFI 2.6 compliant). 1=> Full support for UEFI 2.6 features "
	TokenType = Boolean
	TargetMAK = Yes
	TargetH = Yes
End

TOKEN
	Name  = "TSE_EFI_BROWSER_ACTION_FORM_OPEN_ON_PAGE_NAVIGATION_SUPPORT"
	Value  = "1"
	Help  = "1 is Default. 0=> Do not call EFI_BROWSER_ACTION_FORM_OPEN callback on changing pages. 1=> Call EFI_BROWSER_ACTION_FORM_OPEN callback every time the page changes."
	TokenType = Boolean
	TargetMAK = Yes
	TargetH = Yes
End

TOKEN
	Name  = "SETUP_FORM_BROWSER_NESTED_SEND_FORM_SUPPORT"
	Value  = "1"
	Help  = "1 is Default. 1=> To Support Nested SendForm before TSE as well as inside TSE Setup. 0=> To Support Nested SendForm only before TSE, not inside TSE Setup. "
	TokenType = Boolean
	TargetMAK = Yes
	TargetH = Yes
End

TOKEN
	Name  = "REPORT_MAPPING_ID_FILE_NAME"
	Value  = "MissingMappingStrings.txt"
	TokenType = Expression
	TargetMAK = Yes
End

PATH
	Name  = "TSEBIN_DIR"
End

MODULE
	Help  = "Includes AMITSE.mak to Project"
	File  = "AMITSE.mak"
End

ELINK
	Name  = "DrawQuietBootLogoHook,"
	Parent  = "HOOK1,"
	Priority  = 1
	Help  = "Anchor for hook #1 - DO NOT MODIFY"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "HOOK1,"
	Parent  = "AMITSE_Hooks"
	Priority  = 1
	Help  = "Anchor for hook #1 - DO NOT MODIFY."
	InvokeOrder = AfterParent
End

ELINK
	Name  = "HOOK2,"
	Parent  = "AMITSE_Hooks"
	Priority  = 2
	Help  = "Anchor for hook #2 - DO NOT MODIFY."
	InvokeOrder = AfterParent
End

ELINK
	Name  = "ProcessConInAvailabilityHook,"
	Parent  = "HOOK2,"
	Priority  = 2
	Help  = "Anchor for hook #2 - DO NOT MODIFY"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "ProcessEnterSetupHook,"
	Parent  = "HOOK3,"
	Priority  = 3
	Help  = "Anchor for hook #3 - DO NOT MODIFY"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "HOOK3,"
	Parent  = "AMITSE_Hooks"
	Priority  = 3
	Help  = "Anchor for hook #3 - DO NOT MODIFY."
	InvokeOrder = AfterParent
End

ELINK
	Name  = "ProcessProceedToBootHook,"
	Parent  = "HOOK4,"
	Priority  = 4
	Help  = "Anchor for hook #4 - DO NOT MODIFY"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "HOOK4,"
	Parent  = "AMITSE_Hooks"
	Priority  = 4
	Help  = "Anchor for hook #4 - DO NOT MODIFY."
	InvokeOrder = AfterParent
End

ELINK
	Name  = "MinisetupDriverEntryHookHook,"
	Parent  = "HOOK5,"
	Priority  = 5
	Help  = "Anchor for hook #5 - DO NOT MODIFY"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "HOOK5,"
	Parent  = "AMITSE_Hooks"
	Priority  = 5
	Help  = "Anchor for hook #5 - DO NOT MODIFY."
	InvokeOrder = AfterParent
End

ELINK
	Name  = "PostManagerHandShakeHookHook,"
	Parent  = "HOOK6,"
	Priority  = 6
	Help  = "Anchor for hook #6 - DO NOT MODIFY"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "HOOK6,"
	Parent  = "AMITSE_Hooks"
	Priority  = 6
	Help  = "Anchor for hook #6 - DO NOT MODIFY."
	InvokeOrder = AfterParent
End

ELINK
	Name  = "MapControlKeysHook,"
	Parent  = "HOOK7,"
	Priority  = 7
	Help  = "Anchor for hook #7 - DO NOT MODIFY"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "HOOK7,"
	Parent  = "AMITSE_Hooks"
	Priority  = 7
	Help  = "Anchor for hook #7 - DO NOT MODIFY."
	InvokeOrder = AfterParent
End

ELINK
	Name  = "CheckForKeyHook,"
	Parent  = "HOOK8,"
	Priority  = 8
	Help  = "Anchor for hook #8 - DO NOT MODIFY"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "HOOK8,"
	Parent  = "AMITSE_Hooks"
	Priority  = 8
	Help  = "Anchor for hook #8 - DO NOT MODIFY."
	InvokeOrder = AfterParent
End

ELINK
	Name  = "BeforeLegacyBootLaunchHook,"
	Parent  = "HOOK9,"
	Priority  = 9
	Help  = "Anchor for hook #9 - DO NOT MODIFY"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "HOOK9,"
	Parent  = "AMITSE_Hooks"
	Priority  = 9
	Help  = "Anchor for hook #9 - DO NOT MODIFY."
	InvokeOrder = AfterParent
End

ELINK
	Name  = "AfterLegacyBootLaunchHook,"
	Parent  = "HOOK10,"
	Priority  = 10
	Help  = "Anchor for hook #10 - DO NOT MODIFY"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "HOOK10,"
	Parent  = "AMITSE_Hooks"
	Priority  = 10
	Help  = "Anchor for hook #10 - DO NOT MODIFY."
	InvokeOrder = AfterParent
End

ELINK
	Name  = "BeforeEfiBootLaunchHook,"
	Parent  = "HOOK11,"
	Priority  = 11
	Help  = "Anchor for hook #11 - DO NOT MODIFY"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "HOOK11,"
	Parent  = "AMITSE_Hooks"
	Priority  = 11
	Help  = "Anchor for hook #11 - DO NOT MODIFY."
	InvokeOrder = AfterParent
End

ELINK
	Name  = "AfterEfiBootLaunchHook,"
	Parent  = "HOOK12,"
	Priority  = 12
	Help  = "Anchor for hook #12 - DO NOT MODIFY"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "HOOK12,"
	Parent  = "AMITSE_Hooks"
	Priority  = 12
	Help  = "Anchor for hook #12 - DO NOT MODIFY."
	InvokeOrder = AfterParent
End

ELINK
	Name  = "SavedConfigChangesHook,"
	Parent  = "HOOK13,"
	Priority  = 13
	Help  = "Anchor for hook #13 - DO NOT MODIFY"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "HOOK13,"
	Parent  = "AMITSE_Hooks"
	Priority  = 13
	Help  = "Anchor for hook #13 - DO NOT MODIFY."
	InvokeOrder = AfterParent
End

ELINK
	Name  = "LoadedConfigDefaultsHook,"
	Parent  = "HOOK14,"
	Priority  = 14
	Help  = "Anchor for hook #14 - DO NOT MODIFY"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "HOOK14,"
	Parent  = "AMITSE_Hooks"
	Priority  = 14
	Help  = "Anchor for hook #15 - DO NOT MODIFY."
	InvokeOrder = AfterParent
End

ELINK
	Name  = "TimeOutLoopHookHook,"
	Parent  = "HOOK15,"
	Priority  = 15
	Help  = "Anchor for hook #15 - DO NOT MODIFY"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "HOOK15,"
	Parent  = "AMITSE_Hooks"
	Priority  = 15
	Help  = "Anchor for hook #15 - DO NOT MODIFY."
	InvokeOrder = AfterParent
End

ELINK
	Name  = "OemKey1HookHook,"
	Parent  = "HOOK16,"
	Priority  = 16
	Help  = "Anchor for hook #16 - DO NOT MODIFY"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "HOOK16,"
	Parent  = "AMITSE_Hooks"
	Priority  = 16
	Help  = "Anchor for hook #16 - DO NOT MODIFY."
	InvokeOrder = AfterParent
End

ELINK
	Name  = "OemKey2HookHook,"
	Parent  = "HOOK17,"
	Priority  = 17
	Help  = "Anchor for hook #17 - DO NOT MODIFY"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "HOOK17,"
	Parent  = "AMITSE_Hooks"
	Priority  = 17
	Help  = "Anchor for hook #17 - DO NOT MODIFY."
	InvokeOrder = AfterParent
End

ELINK
	Name  = "OemKey3HookHook,"
	Parent  = "HOOK18,"
	Priority  = 18
	Help  = "Anchor for hook #18 - DO NOT MODIFY"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "HOOK18,"
	Parent  = "AMITSE_Hooks"
	Priority  = 18
	Help  = "Anchor for hook #18 - DO NOT MODIFY."
	InvokeOrder = AfterParent
End

ELINK
	Name  = "OemKey4HookHook,"
	Parent  = "HOOK19,"
	Priority  = 19
	Help  = "Anchor for hook #19 - DO NOT MODIFY"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "HOOK19,"
	Parent  = "AMITSE_Hooks"
	Priority  = 19
	Help  = "Anchor for hook #19 - DO NOT MODIFY."
	InvokeOrder = AfterParent
End

ELINK
	Name  = "PasswordEncodeHook,"
	Parent  = "HOOK20,"
	Priority  = 20
	Help  = "Anchor for hook #20 - DO NOT MODIFY"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "HOOK20,"
	Parent  = "AMITSE_Hooks"
	Priority  = 20
	Help  = "Anchor for hook #20 - DO NOT MODIFY."
	InvokeOrder = AfterParent
End

ELINK
	Name  = "SetControlColorsHook,"
	Parent  = "HOOK21,"
	Priority  = 21
	Help  = "Anchor for hook #21 - DO NOT MODIFY"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "HOOK21,"
	Parent  = "AMITSE_Hooks"
	Priority  = 21
	Help  = "Anchor for hook #21 - DO NOT MODIFY."
	InvokeOrder = AfterParent
End

ELINK
	Name  = "InvalidActionHookHook,"
	Parent  = "HOOK22,"
	Priority  = 22
	Help  = "Anchor for hook #22 - DO NOT MODIFY"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "HOOK22,"
	Parent  = "AMITSE_Hooks"
	Priority  = 22
	Help  = "Anchor for hook #22 - DO NOT MODIFY."
	InvokeOrder = AfterParent
End

ELINK
	Name  = "LoadedUserDefaultsHook,"
	Parent  = "HOOK23,"
	Priority  = 23
	Help  = "Anchor for hook #23 - DO NOT MODIFY"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "HOOK23,"
	Parent  = "AMITSE_Hooks"
	Priority  = 23
	Help  = "Anchor for hook #23 - DO NOT MODIFY."
	InvokeOrder = AfterParent
End

ELINK
	Name  = "LoadedBuildDefaultsHook,"
	Parent  = "HOOK24,"
	Priority  = 24
	Help  = "Anchor for hook #24 - DO NOT MODIFY"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "HOOK24,"
	Parent  = "AMITSE_Hooks"
	Priority  = 24
	Help  = "Anchor for hook #24 - DO NOT MODIFY."
	InvokeOrder = AfterParent
End

ELINK
	Name  = "LoadedPreviousValuesHook,"
	Parent  = "HOOK25,"
	Priority  = 25
	Help  = "Anchor for hook #25 - DO NOT MODIFY"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "HOOK25,"
	Parent  = "AMITSE_Hooks"
	Priority  = 25
	Help  = "Anchor for hook #25 - DO NOT MODIFY."
	InvokeOrder = AfterParent
End

ELINK
	Name  = "SetupConfigModifiedHook,"
	Parent  = "HOOK26,"
	Priority  = 26
	Help  = "Anchor for hook #26 - DO NOT MODIFY"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "HOOK26,"
	Parent  = "AMITSE_Hooks"
	Priority  = 26
	Help  = "Anchor for hook #26 - DO NOT MODIFY."
	InvokeOrder = AfterParent
End

ELINK
	Name  = "HOOK27,"
	Parent  = "AMITSE_Hooks"
	Priority  = 27
	InvokeOrder = AfterParent
End

ELINK
	Name  = "DrawPopupMenuHook,"
	Parent  = "HOOK27,"
	Priority  = 27
	Help  = "Anchor for hook #27 - DO NOT MODIFY"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "HOOK28,"
	Parent  = "AMITSE_Hooks"
	Priority  = 28
	InvokeOrder = AfterParent
End

ELINK
	Name  = "BbsBootHook,"
	Parent  = "HOOK28,"
	Priority  = 28
	Help  = "Anchor for hook #28 - DO NOT MODIFY"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "HOOK29,"
	Parent  = "AMITSE_Hooks"
	Priority  = 29
	Help  = "Anchor for hook #29 - DO NOT MODIFY."
	InvokeOrder = AfterParent
End

ELINK
	Name  = "LoadSetupDefaultsHook,"
	Parent  = "HOOK29,"
	Priority  = 29
	Help  = "Anchor for hook #29 - DO NOT MODIFY"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "HOOK30,"
	Parent  = "AMITSE_Hooks"
	Priority  = 30
	Help  = "Anchor for hook #30 - DO NOT MODIFY."
	InvokeOrder = AfterParent
End

ELINK
	Name  = "PreSystemResetHookHook,"
	Parent  = "HOOK30,"
	Priority  = 30
	Help  = "Anchor for hook #30 - DO NOT MODIFY"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "HOOK31,"
	Parent  = "AMITSE_Hooks"
	Priority  = 31
	Help  = "Anchor for hook #31 - DO NOT MODIFY."
	InvokeOrder = AfterParent
End

ELINK
	Name  = "MapControlMouseActionHook,"
	Parent  = "HOOK31,"
	Priority  = 31
	Help  = "Anchor for hook #31 - DO NOT MODIFY"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "ProcessProceedToBootNowHook,"
	Parent  = "HOOK32,"
	Priority  = 32
	Help  = "Anchor for hook #32 - DO NOT MODIFY"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "HOOK32,"
	Parent  = "AMITSE_Hooks"
	Priority  = 32
	Help  = "Anchor for hook #32 - DO NOT MODIFY."
	InvokeOrder = AfterParent
End

ELINK
	Name  = "ProcessConOutAvailableHook,"
	Parent  = "HOOK33,"
	Priority  = 33
	Help  = "Anchor for hook #32 - DO NOT MODIFY"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "HOOK33,"
	Parent  = "AMITSE_Hooks"
	Priority  = 33
	Help  = "Anchor for hook #33 - DO NOT MODIFY."
	InvokeOrder = AfterParent
End

ELINK
	Name  = "ProcessUIInitHookHook,"
	Parent  = "HOOK34,"
	Priority  = 34
	Help  = "Anchor for hook #34 - DO NOT MODIFY"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "HOOK34,"
	Parent  = "AMITSE_Hooks"
	Priority  = 34
	Help  = "Anchor for hook #34 - DO NOT MODIFY."
	InvokeOrder = AfterParent
End

ELINK
	Name  = "AfterInitPostScreenHook,"
	Parent  = "HOOK35,"
	Priority  = 35
	Help  = "Anchor for hook #35 - DO NOT MODIFY"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "HOOK35,"
	Parent  = "AMITSE_Hooks"
	Priority  = 35
	Help  = "Anchor for hook #35 - DO NOT MODIFY."
	InvokeOrder = AfterParent
End

ELINK
	Name  = "CheckForClickHook,"
	Parent  = "HOOK36,"
	Priority  = 36
	Help  = "Anchor for hook #36 - DO NOT MODIFY"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "HOOK36,"
	Parent  = "AMITSE_Hooks"
	Priority  = 36
	Help  = "Anchor for hook #36 - DO NOT MODIFY."
	InvokeOrder = AfterParent
End

ELINK
	Name  = "SwitchToPostScreenHook,"
	Parent  = "HOOK37,"
	Priority  = 37
	Help  = "Anchor for hook #37 - DO NOT MODIFY"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "HOOK37,"
	Parent  = "AMITSE_Hooks"
	Priority  = 37
	Help  = "Anchor for hook #37 - DO NOT MODIFY."
	InvokeOrder = AfterParent
End

ELINK
	Name  = "InvalidActionHook,"
	Parent  = "InvalidActionHookHook,"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "LoadedUserDefaults,"
	Parent  = "LoadedUserDefaultsHook,"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "LoadedBuildDefaults,"
	Parent  = "LoadedBuildDefaultsHook,"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "LoadedPreviousValues,"
	Parent  = "LoadedPreviousValuesHook,"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "SetupConfigModified,"
	Parent  = "SetupConfigModifiedHook,"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "DrawBbsPopupMenu,"
	Parent  = "DrawBootOnlyBbsPopupMenu,"
	Token = "SETUP_BBS_POPUP_ENABLE" "=" "1"
	InvokeOrder = ReplaceParent
End

ELINK
	Name  = "DrawBootOnlyBbsPopupMenu,"
	Parent  = "DrawPopupMenuHook,"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "BbsBoot,"
	Parent  = "BbsBootHook,"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "LoadSetupDefaults,"
	Parent  = "LoadSetupDefaultsHook,"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "PreSystemResetHook,"
	Parent  = "PreSystemResetHookHook,"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "MapControlMouseAction,"
	Parent  = "MapControlMouseActionHook,"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "ProcessProceedToBootNow,"
	Parent  = "ProcessProceedToBootNowHook,"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "ProcessConOutAvailable,"
	Parent  = "ProcessConOutAvailableHook,"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "AfterInitPostScreen,"
	Parent  = "AfterInitPostScreenHook,"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "SwitchToPostScreen,"
	Parent  = "SwitchToPostScreenHook,"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "ProcessUIInitHook,"
	Parent  = "ProcessUIInitHookHook,"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "IFR_DIR_LIST"
	InvokeOrder = ReplaceParent
End

ELINK
	Name  = "MINISETUPLIB"
	InvokeOrder = ReplaceParent
End

ELINK
	Name  = "TSELITELIB"
	InvokeOrder = ReplaceParent
End

ELINK
	Name  = "AMITSE_Objects"
	InvokeOrder = ReplaceParent
End

ELINK
	Name  = "AMITSE_Hooks"
	InvokeOrder = ReplaceParent
End

ELINK
	Name  = "DrawQuietBootLogo,"
	Parent  = "DrawQuietBootLogoHook,"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "ProcessEnterSetup,"
	Parent  = "ProcessEnterSetupHook,"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "ProcessProceedToBoot,"
	Parent  = "ProcessProceedToBootHook,"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "MinisetupDriverEntryHook,"
	Parent  = "MinisetupDriverEntryHookHook,"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "PostManagerHandShakeHook,"
	Parent  = "PostManagerHandShakeHookHook,"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "MapControlKeys,"
	Parent  = "MapControlKeysHook,"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "CheckForKey,"
	Parent  = "CheckForKeyHook,"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "CheckForClick,"
	Parent  = "CheckForClickHook,"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "BeforeLegacyBootLaunch,"
	Parent  = "BeforeLegacyBootLaunchHook,"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "AfterLegacyBootLaunch,"
	Parent  = "AfterLegacyBootLaunchHook,"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "BeforeEfiBootLaunch,"
	Parent  = "BeforeEfiBootLaunchHook,"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "AfterEfiBootLaunch,"
	Parent  = "AfterEfiBootLaunchHook,"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "SavedConfigChanges,"
	Parent  = "SavedConfigChangesHook,"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "LoadedConfigDefaults,"
	Parent  = "LoadedConfigDefaultsHook,"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "TimeOutLoopHook,"
	Parent  = "TimeOutLoopHookHook,"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "ProcessConInAvailability,"
	Parent  = "ProcessConInAvailabilityHook,"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "OemKey1Hook,"
	Parent  = "OemKey1HookHook,"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "OemKey2Hook,"
	Parent  = "OemKey2HookHook,"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "OemKey3Hook,"
	Parent  = "OemKey3HookHook,"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "OemKey4Hook,"
	Parent  = "OemKey4HookHook,"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "PasswordEncode,"
	Parent  = "PasswordEncodeHook,"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "SetControlColors,"
	Parent  = "SetControlColorsHook,"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "BootFlowExitHook,"
	Parent  = "BootFlowExitHookHook,"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "HOOK38,"
	Parent  = "AMITSE_Hooks"
	Priority  = 38
	Help  = "Anchor for hook #38 - DO NOT MODIFY."
	InvokeOrder = AfterParent
End

ELINK
	Name  = "SetupEntryHook,"
	Parent  = "HOOK38,"
	Priority  = 38
	InvokeOrder = AfterParent
End

ELINK
	Name  = "HOOK39,"
	Parent  = "AMITSE_Hooks"
	Priority  = 39
	Help  = "Anchor for hook #39 - DO NOT MODIFY."
	InvokeOrder = AfterParent
End

ELINK
	Name  = "BootFlowExitHookHook,"
	Parent  = "HOOK39,"
	Priority  = 39
	InvokeOrder = AfterParent
End

ELINK
	Name  = "LastTSEHook"
	Parent  = "HOOK0,"
	Help  = "Anchor for last hook - DO NOT MODIFY"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "HOOK0,"
	Parent  = "AMITSE_Hooks"
	Help  = "Anchor for last hook - DO NOT MODIFY."
	InvokeOrder = AfterParent
End

ELINK
	Name  = "$(TSEBIN_DIR)/setupdbg.h"
	Parent  = "AMITSE_OEM_HEADER_LIST"
	InvokeOrder = AfterParent
End


#ELINK
#	Name  = "{{SCAN_F11, 0},0, SetupShowDebugScreen, 0 },"
#	Parent  = "HOTKEY_LIST"
#	InvokeOrder = AfterParent
#End
ELINK
	Name  = "{{TSE_PRN_SCRN_KEY_SCAN,0},0, PrntScrnKeyNotification, 0 },"
	Parent  = "HOTKEY_LIST"
	Token = "TSE_PRN_SCRN_EVENT_SUPPORT" "=" "1"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "CONTROL_KEY_MAP_LIST"
	InvokeOrder = ReplaceParent
End

ELINK
	Name  = "{ControlActionSelect, CHAR_CARRIAGE_RETURN, SCAN_NULL, 0},"
	Parent  = "CONTROL_KEY_MAP_LIST"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "{ControlActionNextSelection, CHAR_TAB, SCAN_NULL, 0},"
	Parent  = "CONTROL_KEY_MAP_LIST"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "{ControlActionPrevSelection, CHAR_TAB, SCAN_NULL, 0x80000003},"
	Parent  = "CONTROL_KEY_MAP_LIST"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "{ControlActionBackSpace, CHAR_BACKSPACE, SCAN_NULL, 0},"
	Parent  = "CONTROL_KEY_MAP_LIST"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "{ControlActionDecreament, L'-', SCAN_NULL, 0},"
	Parent  = "CONTROL_KEY_MAP_LIST"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "{ControlActionIncreament, L' ', SCAN_NULL, 0},"
	Parent  = "CONTROL_KEY_MAP_LIST"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "{ControlActionIncreament, L'+', SCAN_NULL, 0},"
	Parent  = "CONTROL_KEY_MAP_LIST"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "{ControlActionNextLeft, CHAR_NULL, SCAN_LEFT, 0},"
	Parent  = "CONTROL_KEY_MAP_LIST"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "{ControlActionNextRight, CHAR_NULL, SCAN_RIGHT, 0},"
	Parent  = "CONTROL_KEY_MAP_LIST"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "{ControlActionNextUp, CHAR_NULL, SCAN_UP, 0},"
	Parent  = "CONTROL_KEY_MAP_LIST"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "{ControlActionNextDown, CHAR_NULL, SCAN_DOWN, 0},"
	Parent  = "CONTROL_KEY_MAP_LIST"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "{ControlActionAbort, CHAR_NULL, SCAN_ESC, 0},"
	Parent  = "CONTROL_KEY_MAP_LIST"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "{ControlActionPageUp, CHAR_NULL, SCAN_PAGE_UP, 0},"
	Parent  = "CONTROL_KEY_MAP_LIST"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "{ControlActionPageDown, CHAR_NULL, SCAN_PAGE_DOWN, 0},"
	Parent  = "CONTROL_KEY_MAP_LIST"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "{ControlActionHelpPageUp, L'k', SCAN_NULL, 0},"
	Parent  = "CONTROL_KEY_MAP_LIST"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "{ControlActionHelpPageDown, L'm', SCAN_NULL, 0},"
	Parent  = "CONTROL_KEY_MAP_LIST"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "{ControlActionHome, CHAR_NULL, SCAN_HOME, 0},"
	Parent  = "CONTROL_KEY_MAP_LIST"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "{ControlActionEnd, CHAR_NULL, SCAN_END, 0},"
	Parent  = "CONTROL_KEY_MAP_LIST"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "EXIT_PAGE_OPTIONS_LIST"
	InvokeOrder = ReplaceParent
End

ELINK
	Name  = "{ SAVE_AND_EXIT_VALUE, HandleSaveAndExit },"
	Parent  = "EXIT_PAGE_OPTIONS_LIST"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "{ DISCARD_AND_EXIT_VALUE, HandleExitApplication },"
	Parent  = "EXIT_PAGE_OPTIONS_LIST"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "{ SAVE_AND_RESET_VALUE, HandleSaveAndReset },"
	Parent  = "EXIT_PAGE_OPTIONS_LIST"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "{ DISCARD_AND_RESET_VALUE, HandleResetSys },"
	Parent  = "EXIT_PAGE_OPTIONS_LIST"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "{ SAVE_VALUE, HandleSaveWithoutExit },"
	Parent  = "EXIT_PAGE_OPTIONS_LIST"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "{ DISCARD_VALUE, HandleLoadPreviousValues },"
	Parent  = "EXIT_PAGE_OPTIONS_LIST"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "{ RESTORE_DEFAULTS_VALUE, HandleLoadOptimalDefaults },"
	Parent  = "EXIT_PAGE_OPTIONS_LIST"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "{ SAVE_USER_DEFAULTS_VALUE, HandleSaveUserDefaults },"
	Parent  = "EXIT_PAGE_OPTIONS_LIST"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "{ RESTORE_USER_DEFAULTS_VALUE, HandleRestoreUserDefaults },"
	Parent  = "EXIT_PAGE_OPTIONS_LIST"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "{ SAVE_BOOT_OPTION, HandleBootAddBootOption },"
	Parent  = "EXIT_PAGE_OPTIONS_LIST"
	Token = "SETUP_SUPPORT_ADD_BOOT_OPTION" "=" "1"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "{ LAUNCH_FILE_PATH, HandleLaunchFileSystem },"
	Parent  = "EXIT_PAGE_OPTIONS_LIST"
	Token = "SETUP_SUPPORT_ADD_BOOT_OPTION" "=" "1"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "{ SAVE_DRIVER_OPTION, HandleDriverAddDriverOption },"
	Parent  = "EXIT_PAGE_OPTIONS_LIST"
	Token = "SETUP_SUPPORT_ADD_DRIVER_OPTION" "=" "1"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "{ LAUNCH_FILE_PATH_DRIVER, HandleLaunchFileSystemDriver },"
	Parent  = "EXIT_PAGE_OPTIONS_LIST"
	Token = "SETUP_SUPPORT_ADD_DRIVER_OPTION" "=" "1"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "{ END_OF_EXIT_PAGE_OPTION_LIST, NULL },"
	Parent  = "EXIT_PAGE_OPTIONS_LIST"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "TSE_STRING_CONSUMERS_LIST"
	InvokeOrder = ReplaceParent
End

ELINK
	Name  = "$(TSEBIN_DIR)/FakeTokens.c"
	Parent  = "TSE_STRING_CONSUMERS_LIST"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "TSE_SOURCE_FILES"
	InvokeOrder = ReplaceParent
End

ELINK
	Name  = "$(TSEBIN_DIR)/AmiTSEStr.uni"
	Parent  = "TSE_STRING_FILES"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "$(TSEBIN_DIR)/commonoem.c"
	Parent  = "TSE_SOURCE_FILES"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "$(TSEBIN_DIR)/CommonHelper.c"
	Parent  = "TSE_SOURCE_FILES"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "TSE_STRING_FILES"
	InvokeOrder = ReplaceParent
End

ELINK
	Name  = "AMITSE_HPK_FILE_ORDER"
	InvokeOrder = ReplaceParent
End

ELINK
	Name  = "TSE_LIB_INCLUDES"
	InvokeOrder = ReplaceParent
End

ELINK
	Name  = "-I $(TSEBIN_DIR)"
	Parent  = "TSE_LIB_INCLUDES"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "-I $(TSEBIN_DIR)\Inc"
	Parent  = "TSE_LIB_INCLUDES"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "-I $(TSESRC_DIR)"
	Parent  = "TSE_LIB_INCLUDES"
	Token = "MiniSetup_SUPPORT" "=" "1"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "-I $(TSESRC_DIR)\AMILOGO"
	Parent  = "TSE_LIB_INCLUDES"
	Token = "MiniSetup_SUPPORT" "=" "1"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "-I $(UEFISRC_DIR)"
	Parent  = "TSE_LIB_INCLUDES"
	Token = "UEFI_SOURCES_SUPPORT" "=" "1"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "-I $(TSE_STYLE_DIR)"
	Parent  = "TSE_LIB_INCLUDES"
	Token = "TSE_STYLE_EZPORT_SUPPORT" "=" "1"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "-I $(TSELITESRC_DIR)"
	Parent  = "TSE_LIB_INCLUDES"
	Token = "TseLite_SUPPORT" "=" "1"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "-I $(TSE_ADVANCED_DIR)"
	Parent  = "TSE_LIB_INCLUDES"
	Token = "TSE_ADVANCED_SUPPORT" "=" "1"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "-I $(TSE_BOARD_DIR)"
	Parent  = "TSE_LIB_INCLUDES"
	Token = "TSE_BOARD_SOURCE_SUPPORT" "=" "1"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "-I $(PROJECT_DIR)"
	Parent  = "TSE_LIB_INCLUDES"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "-I $(PROJECT_DIR)\Include"
	Parent  = "TSE_LIB_INCLUDES"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "-I $(PROJECT_DIR)\Include\Protocol"
	Parent  = "TSE_LIB_INCLUDES"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "-I $(PROJECT_DIR)\Core"
	Parent  = "TSE_LIB_INCLUDES"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "-I $(BUILD_DIR)"
	Parent  = "TSE_LIB_INCLUDES"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "AMITSE_OEM_HEADER_LIST"
	InvokeOrder = ReplaceParent
End

ELINK
	Name  = "OEM_KEY_CALLBACK_LIST"
	InvokeOrder = ReplaceParent
End

ELINK
	Name  = "AMITSE_SUBPAGE_AS_ROOT_PAGE_LIST"
	InvokeOrder = ReplaceParent
End

ELINK
	Name  = "AMITSE_HIDDEN_PAGE_LIST"
	InvokeOrder = ReplaceParent
End

ELINK
	Name  = "AMITSE_ROOT_PAGE_ORDER"
	InvokeOrder = ReplaceParent
End

ELINK
	Name  = "ADDITIONAL_AMITSE_LibraryClasses"
	InvokeOrder = ReplaceParent
End

ELINK
	Name  = "ADDITIONAL_AMITSE_Packages"
	InvokeOrder = ReplaceParent
End

ELINK
	Name  = "ADDITIONAL_AMITSE_Guids"
	InvokeOrder = ReplaceParent
End

ELINK
	Name  = "ADDITIONAL_AMITSE_Protocols"
	InvokeOrder = ReplaceParent
End

ELINK
	Name  = "gTSEScreenMgmtProtocolGuid"
	Parent  = "ADDITIONAL_AMITSE_Protocols"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "ADDITIONAL_AMITSE_PCDs"
	InvokeOrder = ReplaceParent
End

ELINK
	Name  = "gAmiTsePkgTokenSpaceGuid.AmiTsePcdResetType"
	Parent  = "ADDITIONAL_AMITSE_PCDs"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "{ 0x93039971, 0x8545, 0x4b04,  0xb4, 0x5e, 0x32, 0xeb, 0x83, 0x26, 0x4, 0xe },{ 0xf22fc20c, 0x8cf4, 0x45eb, 0x8e, 0x6, 0xad, 0x4e, 0x50, 0xb9, 0x5d, 0xd3 }"
	Parent  = "AMITSE_FILTER_CLASSGUID_FORMSETS"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "AmiModulePkg/AmiModulePkg.dec"
	Parent  = "ADDITIONAL_AMITSE_Packages"
	Token = "TSE_FOR_EDKII_SUPPORT" "!=" "1"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "$(NVRAM_DIR)/NvramRead.c"
	Parent  = "TSE_SOURCE_FILES"
	Token = "TSE_FOR_EDKII_SUPPORT" "!=" "1"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, 0, NULL},"
	Parent  = "AMITSE_ROOT_PAGE_ORDER"
	Priority  = -99999
	InvokeOrder = AfterParent
End

ELINK
	Name  = "PASSWORD_ENOCDE_LIST"
	InvokeOrder = ReplaceParent
End

ELINK
	Name  = "AMITSE_FILTER_CLASSGUID_FORMSETS"
	InvokeOrder = ReplaceParent
End

ELINK
	Name  = "AMITSE_SUPPRESS_DYNAMIC_FORMSET_LIST"
	Help  = "Provide GUIDs of dynmaic formset to suppress. Terminate entry with comma"
	InvokeOrder = ReplaceParent
End

ELINK
	Name  = "AMITSE_DYNAMICPARSING_HANDLE_SUPPRESS_LIST"
	Help  = "Provide Guid followed by variable name with single quotes. Terminate entry with comma"
	InvokeOrder = ReplaceParent
End

ELINK
	Name  = "gSetupCompleteRedrawGuid"
	Parent  = "ADDITIONAL_AMITSE_Guids"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "gEvaluateDefaults4FirstBootGuid"
	Parent  = "ADDITIONAL_AMITSE_Guids"
	InvokeOrder = AfterParent
End

ELINK
	Name  = "gPlatformRecoveryOrderGuid"
	Parent  = "ADDITIONAL_AMITSE_Guids"
	InvokeOrder = AfterParent
End

OUTPUTREGISTER
	Name  = "AUTOGEN_AMITSE_ELINKS"
	Path  = "Build"
	File  = "AMITSEElinks.h"
	Template  = "AMITSEElinks.txt"
End

OUTPUTREGISTER
	Name  = "AUTOGEN_AMITSE_HOTKEY_ELINKS"
	Path  = "Build"
	File  = "HotKeyElinks.h"
	Template  = "HotKeyElinks.txt"
End

OUTPUTREGISTER
	Name  = "AUTOGEN_AMITSE_HOTCLICK_ELINKS"
	Path  = "Build"
	File  = "HotClickElinks.h"
	Template  = "HotClickElinks.txt"
End


#ELINK
#	Name  = "{{ 0xE770BB69, 0xBCB4, 0x4D04, 0x9E, 0x97, 0x23, 0xFF, 0x94, 0x56, 0xFE, 0xAC }, {'S','y','s','t','e','m','A','c','c','e','s','s'}},"
#	Parent  = "AMITSE_DYNAMICPARSING_HANDLE_SUPPRESS_LIST"
#	Help  = "Provide GUIDs of variable and Variable name as above formate to suppress while parsing variable if it is present already in other formset."
#	InvokeOrder = AfterParent
#End
INFComponent
	Name  = "AMITSE"
	File  = "../../../../Build/AMITSE.inf"
	Package  = "AmiTsePkg"
	ModuleTypes  = "DXE_DRIVER"
	Token = "TSE_FOR_EDKII_SUPPORT" "!=" "1"
	Skip_Packaging = Yes
End

INFComponent
	Name  = "AMITSE"
	File  = "../../../../Build/AMITSE.inf"
	Package  = "AmiTsePkg"
	ModuleTypes  = "DXE_DRIVER"
	Token = "TSE_FOR_EDKII_SUPPORT" "=" "1"
End

INFComponent
	Name  = "SmallLogo"
	File  = "SmallLogo.inf"
	Package  = "AmiTsePkg"
	ModuleTypes  = "USER_DEFINED"
	Token = "TSE_FOR_EDKII_SUPPORT" "!=" "1"
End

INFComponent
	Name  = "SignOn"
	File  = "SignOn\SignOn.inf"
	Package  = "AmiTsePkg"
	ModuleTypes  = "USER_DEFINED"
	Token = "TSE_FOR_EDKII_SUPPORT" "!=" "1"
End

FFS_FILE
	Name  = "AmiTseFdfFileStatement"
	FD_AREA  = "FV_MAIN"
	FILE_Stmt  = "AmiTsePkg/Core/em/AMITSE/AmiTseFdfFileStatement.txt"
	Token = "TSE_FOR_EDKII_SUPPORT" "!=" "1"
End

FFS_FILE
	Name  = "AmiTseRomHoleFdfFileStatement"
	FD_AREA  = "FV_MAIN"
	FILE_Stmt  = "AmiTsePkg/Core/em/AMITSE/Romhole.txt"
	Token = "TSE_ROMHOLE_SUPPORT" "=" "1"
	Token = "NESTED_FV_MAIN" "=" "0"
End

FFS_FILE
	Name  = "AmiTseRomHoleFdfFileStatement"
	FD_AREA  = "FV_MAIN_WRAPPER"
	Index  = '"BEFORE" "FvMainCompressed"'
	FILE_Stmt  = "AmiTsePkg/Core/em/AMITSE/Romhole.txt"
	Token = "TSE_ROMHOLE_SUPPORT" "=" "1"
	Token = "NESTED_FV_MAIN" "=" "1"
End

FFS_FILE
	Name  = "AmiTseLogoFfsFdfFileStatement"
	FD_AREA  = "FV_MAIN"
	FILE_Stmt  = "AmiTsePkg/Core/em/AMITSE/Logoffs.txt"
	Token = "TSE_ROMHOLE_SUPPORT" "=" "0"
	Token = "TSE_FOR_EDKII_SUPPORT" "!=" "1"
End

FFS_FILE
	Name  = "AmiTseLogoFfsFdfFileStatement"
	FD_AREA  = "FV_LOGOROMHOLE"
	FILE_Stmt  = "AmiTsePkg/Core/em/AMITSE/Logoffs.txt"
	Token = "TSE_ROMHOLE_SUPPORT" "=" "1"
End

FFS_FILE
	Name  = "SignOn"
	FD_AREA  = "FV_MAIN"
	INFComponent  = "AmiTsePkg.SignOn"
	Rule_Override  = "SubtypeGuidUncompressed"
	Token = "TSE_FOR_EDKII_SUPPORT" "!=" "1"
End

FFS_FILE
	Name  = "SetupDataFdFileStatement"
	FD_AREA  = "FV_MAIN"
	FILE_Stmt  = "AmiTsePkg/Core/em/AMITSE/SetupDataFdFileStatement.txt"
	Token = "TSE_ISOLATE_SETUP_DATA" "=" "1"
End

FD_AREA
	Name  = "FV_LOGOROMHOLE"
	TYPE  = "StandAlone"
	FD_INFO  = "AMIROM"
	Size  = "$(ROMHOLE_BLOCK_SIZE) * $(ROMHOLE_NUMBER_OF_BLOCK)"
	Attributes  = "0x7ffe"
	Guid  = "E54D9684-2735-43ef-A379-30F2F592BA10"
	Token = "TSE_ROMHOLE_SUPPORT" "=" "1"
End