STL & STEP files.
Printed @ 0.2mm Layer height - 20% Infill - 8 Perimeters - 8 Solid layers Top & Bottom (That's optional - I just used the same profile I use to print mounts of any kind. Just my personal preference.) All designed to be printed as-is no supports.
This is a WIP (Work-In-Progess). I've uploaded the STL's & STEP files for the Bowden Config for the SD Press. The STEP's for the non-bowden soon to follow (I need to clean then up and label everything) As for the Non-Bowden verison. I am still designing the plug-in for the Z-Probe.
In the firmware folder, It has the INO & a precomplied HEX with changes to support the E3D v6 on the Press. Nothing else.
Additional Parts Need :
Both : E3D v6 Universal /w Bowden Extras (Comes with a bowden tube) Then request either the 24V @ 25W or the 24V @ 40W Heater Cartridge. > http://www.filastruder.com/products/all-metal-e3d-v6-hotend And x1 - VHR-2N - CONN HOUSING VH 2POS 3.96MM WH > http://www.digikey.com/product-search/en?mpart=VHR-2N&vendor=455 Bowden setup:
x2 M4 Screws @ 30mm - 2x M4 Nuts - 4x M3 Screws @ 30mm - x1 608ZZ bearing - x1 Spring (anything about 11mm in diameter) x2 Push-to-Connect Fitting (http://www.amazon.com/gp/product/B00PN5G2NQ/)
Non-Bowden Setup:
3x M3 Screws @ 30mm - 1x 608ZZ Bearing - 1x Spring (see above) I use a short piece of PTFE tubing that have a "V" shape at the top (see the example image for details.)