-
Notifications
You must be signed in to change notification settings - Fork 0
/
ss7.conf.template.single-link
131 lines (94 loc) · 4.52 KB
/
ss7.conf.template.single-link
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
[linkset-siuc]
; The linkset is enabled
enabled => yes
; The end-of-pulsing (ST) is not used to determine when incoming address is complete
enable_st => no
; Reply incoming call with CON rather than ACM and ANM
use_connect => yes
; The CIC hunting policy (even_mru, odd_lru, seq_lth, seq_htl) is even CIC numbers, most recently used
hunting_policy => even_mru
; Incoming calls are placed in the ss7 context in the asterisk dialplan
context => ss7
; The language for this context is da
language => da
; The value and action for t35. Value is in msec, action is either st or timeout
; If you use overlapped dialling dial plan, you might choose: t35 => 4000,st
t35 => 15000,timeout
; The subservice field: national (8), international (0), auto or decimal/hex value
; The auto means that the subservice is obtained from first received SLTM
subservice => auto
; The host running the mtp3 service
; mtp3server => localhost
; SS7 variant, either ITU or CHINA
;variant => ITU
; The point code for this SS7 signalling point is 0x8e0
; If point code is included here, it must not occur in host section
;opc => 0x8e0
; The destination point (peer) code is 0x3fff for linkset siuc
; If point code is included here, it must not occur in host section
;dpc => siuc:0x3fff
[link-l1]
; This link belongs to linkset siuc
linkset => siuc
; The speech/audio circuit channels on this link
channels => 1-15,17-31
; The signalling channel
schannel => 16
; To use the remote mtp3 service, use 'schannel => remote,16'
; The first CIC
firstcic => 1
; The link is enabled
enabled => yes
; Echo cancellation
; echocancel can be one of: no, 31speech (enable only when transmission medium is 3.1Khz speech), allways
echocancel => no
; echocan_train specifies training period, between 10 to 100 msec
echocan_train => 350
; echocan_taps specifies number of taps, 32, 64, 128 or 256
echocan_taps => 128
; RX and TX gains
rxgain => 0.0
txgain => 0.0
; Relax DTMF, yes or no
relaxdtmf => no
; If link is connected to an STP with point code 0x3ff0, the following may be needed
stp => 0x3ff0
[host-gentoo1]
; chan_ss7 auto-configures by matching the machines host name with the host-<name>
; section in the configuration file, in this case 'gentoo1'. The same
; configuration file can thus be used on several hosts.
; The host is enabled
enabled => yes
; The point code for this SS7 signalling point is 0x8e0
opc => 0x8e0
; The destination point (peer) code is 0x3fff for linkset siuc
dpc => siuc:0x3fff
; If the link connected to an STP (with point code 0x123), you may use
; dpc => siuc:0x3ff,l1:0x123
; Syntax: links => link-name:digium-connector-no
; The links on the host is 'l1', connected to span/connector #1
links => l1:1
; The SCCP global title: translation-type, nature-of-address, numbering-plan, address
globaltitle => 0x00, 0x04, 0x01, 4546931411
ssn => 7
[jitter]
;------------------------------ JITTER BUFFER CONFIGURATION --------------------------
; jbenable = yes ; Enables the use of a jitterbuffer on the receiving side of a
; SIP channel. Defaults to "no". An enabled jitterbuffer will
; be used only if the sending side can create and the receiving
; side can not accept jitter. The SIP channel can accept jitter,
; thus a jitterbuffer on the receive SIP side will be used only
; if it is forced and enabled.
; jbforce = no ; Forces the use of a jitterbuffer on the receive side of a SIP
; channel. Defaults to "no".
; jbmaxsize = 200 ; Max length of the jitterbuffer in milliseconds.
; jbresyncthreshold = 1000 ; Jump in the frame timestamps over which the jitterbuffer is
; resynchronized. Useful to improve the quality of the voice, with
; big jumps in/broken timestamps, usually sent from exotic devices
; and programs. Defaults to 1000.
; jbimpl = fixed ; Jitterbuffer implementation, used on the receiving side of a SIP
; channel. Two implementations are currently available - "fixed"
; (with size always equals to jbmaxsize) and "adaptive" (with
; variable size, actually the new jb of IAX2). Defaults to fixed.
; jblog = no ; Enables jitterbuffer frame logging. Defaults to "no".
;-----------------------------------------------------------------------------------