Bug: MIDI CAPTURE DEVICES and ACTI / OMNI / MULTI modes issue

[ToFFmashines]

Describe the bug
Zynthian is set with:

• Engine Sfizz on midi channel 1 with select MULTI- Network MIDI-IN and unselect OMNI - Widi Bud Pro Midi

• Engine Sfizz on midi channel 2 with unselect MULTI- Network MIDI-IN and select OMNI - Widi Bud Pro Midi

Issue is in that midi signal from Widi Bud Pro Midi is going to channel 1, where is unselect and where it has nothing to do. Is visible by ZynMidi route ch#1 in Midi Log.

To Reproduce
Connections:
Zynthian is conntroled by Bespoke from PC over rtp-midi
WIDI BUD Pro is connected over USB

Setting of Midi in for ch#1

Setting of Midi in for ch#2

Expected behavior
The midi signal from the Widi Bud Pro will only go to channel 2

Setup:
HARDWARE
Raspberry Pi 400 Rev 1.1
Audio: Behringer UMC404HD
Display: WaveShare 7 HDMI+USB 1024x600
Wiring: DUMMIES
I2C: Not detected
Profile:
SYSTEM
Raspbian GNU/Linux 10 (buster)
Build Date: 2023-08-25
Memory: 6% (246M/3839M)
SD Card: 65% (37G/59G)
Temperature: 45.7ºC
Overclock: None
SOFTWARE
zyncoder: testing (c452d2b)
zynthian-ui: testing (f19f78c)
zynthian-sys: testing (77b48c1)
zynthian-data: testing (44a652c)
zynthian-webconf: testing (6b74794)

Additional context
Snapshots
018-example-widi.zip

[jofemodo]

Sorry, i can't reproduce the issue in stable branch.
I loaded your snapshot and MIDI from the "OMNI" device doesn't reach chain 2, only chain 1.

[ToFFmashines]

Please can you try this:
Channel #1 - selected OMNI controler 1,
- unselected OMNI controler 2,
Channel #2 - unselected OMNI controler 1,
- selected OMNI controler 2,

[jofemodo]

Sorry, i can't reproduce the issue in stable branch.
I loaded your snapshot and MIDI from the "OMNI" device doesn't reach chain 2, only chain 1.