Skip to content

Commit

Permalink
Update proxynode-mn-install.sh
Browse files Browse the repository at this point in the history
  • Loading branch information
@ProxyNode
ProxyNode committed Nov 23, 2018
1 parent e6d30ff commit 43407ba
Showing 1 changed file with 117 additions and 260 deletions.
377 changes: 117 additions & 260 deletions proxynode-mn-install.sh
View file
Original file line number Diff line number Diff line change
@@ -1,266 +1,123 @@
#!/bin/bash

TMP_FOLDER=$(mktemp -d)
CONFIG_FILE='proxynode.conf'
CONFIGFOLDER='/root/.proxynode'
COIN_DAEMON='/usr/local/bin/proxynoded'
COIN_CLI='/usr/local/bin/proxynode-cli'
COIN_TGZ='https://github.com/ProxyNode/proxynode/releases/download/v1.0.0/Linux.zip'
COIN_ZIP='https://github.com/ProxyNode/proxynode/releases/download/v1.0.0/Linux.zip'
COIN_NAME='proxynode'
COIN_PORT=12195
RPC_PORT=12196


NODEIP=$(curl -s4 icanhazip.com)


RED='\033[0;31m'
GREEN='\033[0;32m'
NC='\033[0m'

function compile_node() {
echo -e "Prepare to launch $COIN_NAME"
wget https://github.com/ProxyNode/proxynode/releases/download/v1.0.0/Linux.zip
#/bin/bash

cd ~
echo "****************************************************************************"
echo "* Ubuntu 16.04 is the recommended operating system for this install. *"
echo "* *"
echo "* This script will install and configure your Proxynode masternodes. *"
echo "* *"
echo "* IPv6 will be used if available *"
echo "* *"
echo "****************************************************************************"
echo && echo && echo
echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
echo "! !"
echo "! Make sure you double check before hitting enter !"
echo "! !"
echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
echo && echo && echo

echo "Do you want to install all needed dependencies (no if you did it before)? [y/n]"
read DOSETUP

if [ $DOSETUP = "y" ]
then
sudo apt-get update
sudo apt-get -y upgrade
sudo apt-get -y dist-upgrade
sudo apt-get update
sudo apt-get install -y zip unzip

cd /var
sudo touch swap.img
sudo chmod 600 swap.img
sudo dd if=/dev/zero of=/var/swap.img bs=1024k count=2000
sudo mkswap /var/swap.img
sudo swapon /var/swap.img
sudo free
sudo echo "/var/swap.img none swap sw 0 0" >> /etc/fstab
cd

wget https://github.com/prxcoin/prxcoin/releases/download/v1.4.0.0/Linux.zip
unzip Linux.zip
chmod +x Linux/*
cd Linux/bin
sudo cp proxynoded proxynode-cli /usr/local/bin
chmod +x /usr/local/bin/*
cd -
clear
}

function configure_systemd() {
cat << EOF > /etc/systemd/system/$COIN_NAME.service
[Unit]
Description=$COIN_NAME service
After=network.target
[Service]
User=root
Group=root
Type=forking
#PIDFile=$CONFIGFOLDER/$COIN_NAME.pid
ExecStart=$COIN_PATH$COIN_DAEMON -daemon -conf=$CONFIGFOLDER/$CONFIG_FILE -datadir=$CONFIGFOLDER
ExecStop=-$COIN_PATH$COIN_CLI -conf=$CONFIGFOLDER/$CONFIG_FILE -datadir=$CONFIGFOLDER stop
Restart=always
PrivateTmp=true
TimeoutStopSec=60s
TimeoutStartSec=10s
StartLimitInterval=120s
StartLimitBurst=5
[Install]
WantedBy=multi-user.target
EOF

systemctl daemon-reload
sleep 3
systemctl start $COIN_NAME.service
systemctl enable $COIN_NAME.service >/dev/null 2>&1

if [[ -z "$(ps axo cmd:100 | egrep $COIN_DAEMON)" ]]; then
echo -e "${RED}$COIN_NAME is not running${NC}, please investigate. You should start by running the following commands as root:"
echo -e "${GREEN}systemctl start $COIN_NAME.service"
echo -e "systemctl status $COIN_NAME.service"
echo -e "less /var/log/syslog${NC}"
exit 1
fi
}

function create_config() {
mkdir $CONFIGFOLDER >/dev/null 2>&1
RPCUSER=$(tr -cd '[:alnum:]' < /dev/urandom | fold -w10 | head -n1)
RPCPASSWORD=$(tr -cd '[:alnum:]' < /dev/urandom | fold -w22 | head -n1)
cat << EOF > $CONFIGFOLDER/$CONFIG_FILE
rpcuser=$RPCUSER
rpcpassword=$RPCPASSWORD
rpcallowip=127.0.0.1
listen=1
server=1
daemon=1
port=$COIN_PORT
addnode=178.238.235.79:12195
addnode=79.143.189.105:12195
addnode=185.2.103.114:12195
EOF
}


function create_key() {
echo -e "Enter your ${RED}$COIN_NAME Masternode Private Key${NC}. Leave it blank to generate a new ${RED}Masternode Private Key${NC} for you:"
read -e COINKEY
if [[ -z "$COINKEY" ]]; then
$COIN_DAEMON -daemon
sleep 30
if [ -z "$(ps axo cmd:100 | grep $COIN_DAEMON)" ]; then
echo -e "${RED}$COIN_NAME server couldn not start. Check /var/log/syslog for errors.{$NC}"
exit 1
fi
COINKEY=$($COIN_CLI masternode genkey)
if [ "$?" -gt "0" ];
then
echo -e "${RED}Wallet not fully loaded. Let us wait and try again to generate the Private Key${NC}"
sleep 30
COINKEY=$($COIN_CLI masternode genkey)
fi
$COIN_CLI stop
chmod +x Linux/bin/*
sudo mv Linux/bin/* /usr/local/bin
rm -rf Linux.zip Windows Linux Mac

sudo apt-get install -y ufw
sudo ufw allow ssh/tcp
sudo ufw limit ssh/tcp
sudo ufw logging on
echo "y" | sudo ufw enable
sudo ufw status

mkdir -p ~/bin
echo 'export PATH=~/bin:$PATH' > ~/.bash_aliases
source ~/.bashrc
fi
clear
}


function update_config() {
sed -i 's/daemon=1/daemon=0/' $CONFIGFOLDER/$CONFIG_FILE
cat << EOF >> $CONFIGFOLDER/$CONFIG_FILE
logintimestamps=1
maxconnections=256
#bind=$NODEIP
masternode=1
externalip=$NODEIP:$COIN_PORT
masternodeprivkey=$COINKEY
EOF
}


function enable_firewall() {
echo -e "Installing and setting up firewall to allow ingress on port ${GREEN}$COIN_PORT${NC}"
ufw allow $COIN_PORT/tcp comment "$COIN_NAME MN port" >/dev/null
ufw allow ssh comment "SSH" >/dev/null 2>&1
ufw limit ssh/tcp >/dev/null 2>&1
ufw default allow outgoing >/dev/null 2>&1
echo "y" | ufw enable >/dev/null 2>&1
}



function get_ip() {
declare -a NODE_IPS
for ips in $(netstat -i | awk '!/Kernel|Iface|lo/ {print $1," "}')
do
NODE_IPS+=($(curl --interface $ips --connect-timeout 2 -s4 icanhazip.com))
done

if [ ${#NODE_IPS[@]} -gt 1 ]
then
echo -e "${GREEN}More than one IP. Please type 0 to use the first IP, 1 for the second and so on...${NC}"
INDEX=0
for ip in "${NODE_IPS[@]}"
do
echo ${INDEX} $ip
let INDEX=${INDEX}+1
done
read -e choose_ip
NODEIP=${NODE_IPS[$choose_ip]}
else
NODEIP=${NODE_IPS[0]}
fi
}


function compile_error() {
if [ "$?" -gt "0" ];
then
echo -e "${RED}Failed to compile $COIN_NAME. Please investigate.${NC}"
exit 1
fi
}


function checks() {
if [[ $(lsb_release -d) != *16.04* ]]; then
echo -e "${RED}You are not running Ubuntu 16.04. Installation is cancelled.${NC}"
exit 1
fi

if [[ $EUID -ne 0 ]]; then
echo -e "${RED}$0 must be run as root.${NC}"
exit 1
fi

if [ -n "$(pidof $COIN_DAEMON)" ] || [ -e "$COIN_DAEMOM" ] ; then
echo -e "${RED}$COIN_NAME is already installed.${NC}"
exit 1
fi
}

function prepare_system() {
echo -e "Prepare the system to install ${GREEN}$COIN_NAME${NC} master node."
apt-get update >/dev/null 2>&1
DEBIAN_FRONTEND=noninteractive apt-get update > /dev/null 2>&1
DEBIAN_FRONTEND=noninteractive apt-get -o Dpkg::Options::="--force-confdef" -o Dpkg::Options::="--force-confold" -y -qq upgrade >/dev/null 2>&1
apt install -y software-properties-common >/dev/null 2>&1
echo -e "${GREEN}Adding bitcoin PPA repository"
apt-add-repository -y ppa:bitcoin/bitcoin >/dev/null 2>&1
echo -e "Installing required packages, it may take some time to finish.${NC}"
apt-get update >/dev/null 2>&1
apt-get install -y -o Dpkg::Options::="--force-confdef" -o Dpkg::Options::="--force-confold" make software-properties-common \
build-essential libtool unzip autoconf libssl-dev libboost-dev libboost-chrono-dev libboost-filesystem-dev libboost-program-options-dev \
libboost-system-dev libboost-test-dev libboost-thread-dev sudo automake git wget curl libdb4.8-dev bsdmainutils libdb4.8++-dev \
libminiupnpc-dev libgmp3-dev ufw pkg-config libevent-dev libdb5.3++ libzmq5 >/dev/null 2>&1
if [ "$?" -gt "0" ];
then
echo -e "${RED}Not all required packages were installed properly. Try to install them manually by running the following commands:${NC}\n"
echo "apt-get update"
echo "apt -y install software-properties-common"
echo "apt-add-repository -y ppa:bitcoin/bitcoin"
echo "apt-get update"
echo "apt install -y make build-essential libtool software-properties-common autoconf libssl-dev libboost-dev libboost-chrono-dev libboost-filesystem-dev \
libboost-program-options-dev libboost-system-dev libboost-test-dev libboost-thread-dev sudo automake git curl libdb4.8-dev \
bsdmainutils libdb4.8++-dev libminiupnpc-dev libgmp3-dev ufw fail2ban pkg-config libevent-dev"
exit 1
fi

clear
}

function create_swap() {
echo -e "Checking if swap space is needed."
PHYMEM=$(free -g|awk '/^Mem:/{print $2}')
SWAP=$(free -g|awk '/^Swap:/{print $2}')
if [ "$PHYMEM" -lt "2" ] && [ -n "$SWAP" ]
then
echo -e "${GREEN}Server is running with less than 2G of RAM without SWAP, creating 2G swap file.${NC}"
SWAPFILE=$(mktemp)
dd if=/dev/zero of=$SWAPFILE bs=1024 count=2M
chmod 600 $SWAPFILE
mkswap $SWAPFILE
swapon -a $SWAPFILE
else
echo -e "${GREEN}Server running with at least 2G of RAM, no swap needed.${NC}"
fi
clear
}


function important_information() {
## Setup conf
IP=$(curl -k https://ident.me)
mkdir -p ~/bin
echo ""
echo "Configure your masternodes now!"
echo "Detecting IP address:$IP"

echo ""
echo "Enter alias for new node"
read ALIAS

echo ""
echo "Enter port for node $ALIAS"
echo "Just press enter"
DEFAULTPORT=12195
PORT=12195

echo ""
echo "Enter masternode private key for node $ALIAS"
read PRIVKEY

RPCPORT=12196
echo "The RPC port is $RPCPORT"

ALIAS=${ALIAS}
CONF_DIR=~/.prx_$ALIAS

# Create scripts
echo '#!/bin/bash' > ~/bin/prxd_$ALIAS.sh
echo "prxd -daemon -conf=$CONF_DIR/prx.conf -datadir=$CONF_DIR "'$*' >> ~/bin/prxd_$ALIAS.sh
echo '#!/bin/bash' > ~/bin/prx-cli_$ALIAS.sh
echo "prx-cli -conf=$CONF_DIR/prx.conf -datadir=$CONF_DIR "'$*' >> ~/bin/prx-cli_$ALIAS.sh
echo '#!/bin/bash' > ~/bin/prx-tx_$ALIAS.sh
echo "prx-tx -conf=$CONF_DIR/prx.conf -datadir=$CONF_DIR "'$*' >> ~/bin/prx-tx_$ALIAS.sh
chmod 755 ~/bin/prx*.sh

mkdir -p $CONF_DIR
echo "rpcuser=user"`shuf -i 100000-10000000 -n 1` >> prx.conf_TEMP
echo "rpcpassword=pass"`shuf -i 100000-10000000 -n 1` >> prx.conf_TEMP
echo "rpcallowip=127.0.0.1" >> prx.conf_TEMP
echo "rpcport=$RPCPORT" >> prx.conf_TEMP
echo "listen=1" >> prx.conf_TEMP
echo "server=1" >> prx.conf_TEMP
echo "daemon=1" >> prx.conf_TEMP
echo "logtimestamps=1" >> prx.conf_TEMP
echo "maxconnections=256" >> prx.conf_TEMP
echo "masternode=1" >> prx.conf_TEMP
echo "port=$PORT" >> prx.conf_TEMP
echo "masternodeaddr="[$IP]":$PORT" >> prx.conf_TEMP
echo "masternodeprivkey=$PRIVKEY" >> prx.conf_TEMP
sudo ufw allow $PORT/tcp

mv prx.conf_TEMP $CONF_DIR/prx.conf

sh ~/bin/prxd_$ALIAS.sh


echo
echo -e "================================================================================================================================"
echo -e "$COIN_NAME Masternode is up and running listening on port ${RED}$COIN_PORT${NC}."
echo -e "Configuration file is: ${RED}$CONFIGFOLDER/$CONFIG_FILE${NC}"
echo -e "Start: ${RED}systemctl start $COIN_NAME.service${NC}"
echo -e "Stop: ${RED}systemctl stop $COIN_NAME.service${NC}"
echo -e "VPS_IP:PORT ${RED}$NODEIP:$COIN_PORT${NC}"
echo -e "MASTERNODE PRIVATEKEY is: ${RED}$COINKEY${NC}"
echo -e "Please check ${RED}$COIN_NAME${NC} is running with the following command: ${RED}systemctl status $COIN_NAME.service${NC}"
echo -e "================================================================================================================================"
}

function setup_node() {
get_ip
create_config
create_key
update_config
enable_firewall
important_information
configure_systemd
}


##### Main #####
clear
echo -e "Proxynode coin Masternode is up and running and it is listening on port $PORT."
echo -e "Please make sure the you use the [] when using IPv6 in the masternode config of local wallet" [$IP]:$PORT
echo -e "MASTERNODE PRIVATEKEY is: $PRIVKEY"
echo -e "================================================================================================================================"


checks
prepare_system
create_swap
compile_node
setup_node

0 comments on commit 43407ba

Please sign in to comment.