Skip to content

circuit_switch is a gem for 'difficult' application. This switch helps to make changes easier and deploy safely.

License

Notifications You must be signed in to change notification settings

makicamel/circuit_switch

Repository files navigation

circuit_switch

circuit_switch is a gem for 'difficult' application; for example, few tests, too many meta-programming codes, low aggregation classes and few deploys.
This switch helps make changes easier and deploy safely.
You can deploy and check with a short code like following if the change is good or not, and when a problem is found, you can undo it without releasing it.

if CircuitSwitch.report.open?
  # new codes
else
  # old codes
end

You can also specify conditions to release testing features.

CircuitSwitch.run(if: -> { current_user.testing_new_feature? }) do
  # testing feature codes
end

CircuitSwitch depends on ActiveRecord and ActiveJob.

Installation

Add this line to your application's Gemfile and run bundle install:

gem 'circuit_switch'

Run generator to create initializer and modify config/initizlizers/circuit_switch.rb:

rails generate circuit_switch:install

Generate a migration for ActiveRecord.
This table saves named key, circuit caller, called count, limit count and so on.

rails generate circuit_switch:migration circuit_switch
rails db:migrate

Usage

run

When you want to deploy and undo it if something unexpected happens, use CircuitSwitch.run.

CircuitSwitch.run do
  # experimental codes
end

run basically calls the received proc. But when a condition is met, it closes the circuit and does not evaluate the proc.
To switch circuit opening and closing, a set of options can be set. Without options, the circuit is always open.
You can set close_if_reach_limit: true so that the circuit is only open for 10 invocations. The constant 10 comes from the table definition we have arbitrarily chosen. In case you need a larger number, specify it in the limit_count option in combination with close_if_reach_limit: true, or alter default constraint on circuit_switches.run_limit_count.

  • key: [String] The identifier to find record by. If key has not been passed, circuit_switches.caller is chosen as an alternative.
  • if: [Boolean, Proc] Calls proc when the value of if is evaluated truthy (default: true)
  • close_if: [Boolean, Proc] Calls proc when the value of close_if is evaluated falsy (default: false)
  • close_if_reach_limit: [Boolean] Stops calling proc when circuit_switches.run_count has reached circuit_switches.run_limit_count (default: false)
  • limit_count: [Integer] Mutates circuit_switches.run_limit_count whose value defined in schema is 10 by default. (default: nil)
    Can't be set to 0 when close_if_reach_limit is true. This option is only relevant when close_if_reach_limit is set to true.
  • initially_closed: [Boolean] Creates switch with terminated mode (default: false)

To close the circuit at a specific date, code goes like:

CircuitSwitch.run(close_if: -> { Date.today >= some_day }) do
  # testing codes
end

Or when the code of concern has been called 1000 times:

CircuitSwitch.run(close_if_reach_limit: true, limit_count: 1_000) do
  # testing codes
end

To run other codes when circuit closes, run? is available.

circuit_open = CircuitSwitch.run { ... }.run?
unless circuit_open
  # other codes
end

CircuitSwitch.run.run? has syntax sugar. open? doesn't receive proc.

if CircuitSwitch.open?
  # new codes
else
  # old codes
end

report

When you just want to report, set your reporter to initializer and then call CircuitSwitch.report.

CircuitSwitch.report(if: some_condition)

report just reports which line of code is called. It doesn't receive proc. It's useful for refactoring or removing dead codes.
Same as run, a set of options can be set. By default, this method does not send reports more than 10 times. The constant 10 comes from the table definition we have arbitrarily chosen. In case you need a larger number, specify it in the limit_count option, or alter default constraint on circuit_switches.report_limit_count.

  • key: [String] The identifier to find record by. If key has not been passed, circuit_switches.caller is chosen as an alternative.
  • if: [Boolean, Proc] Reports when the value of if is evaluated truthy (default: true)
  • stop_report_if: [Boolean, Proc] Reports when the value of stop_report_if is evaluated falsy (default: false)
  • stop_report_if_reach_limit: [Boolean] Stops reporting when circuit_switches.report_count has reached circuit_switches.report_limit_count (default: true)
  • limit_count: [Integer] Mutates circuit_switches.report_limit_count whose value defined in schema is 10 by default. (default: nil)
    Can't be set to 0 when stop_report_if_reach_limit is true.

To know if report has already been executed or not, you can get through reported?.
Of course you can chain report and run or open?.

with_backtrace

Reporter reports a short message by default like Watching process is called for 5th. Report until for 10th..
When your reporting tool knows about it's caller and backtrace, this is enough (e.g. Bugsnag).
When your reporting tool just reports plain message (e.g. Slack), you can set with_backtrace true to initializer. Then report has a long message with backtrace like:

Watching process is called for 5th. Report until for 10th.
called_path: /app/services/greetings_service:21 block in validate
/app/services/greetings_service:20 validate
/app/services/greetings_service:5 call
/app/controllers/greetings_controller.rb:93 create

Test

To test, FactoryBot will look like this;

FactoryBot.define do
  factory :circuit_switch, class: 'CircuitSwitch::CircuitSwitch' do
    sequence(:key) { |n| "/path/to/file:#{n}" }
    sequence(:caller) { |n| "/path/to/file:#{n}" }
    due_date { Date.tomorrow }

    trait :initially_closed do
      run_is_terminated { true }
    end
  end
end

Task

When find a problem and you want to terminate running or reporting right now, execute a task with it's caller.
You can specify either key or caller.

rake circuit_switch:terminate_to_run[your_key]
rake circuit_switch:terminate_to_report[/app/services/greetings_service:21 block in validate]

In case of not Rails applications, add following to your Rakefile:

require 'circuit_switch/tasks'

Reminder for cleaning up codes

Too many circuits make codes messed up. We want to remove circuits after several days, but already have too many TODO things enough to remember them.
Let's forget it! Set due_date_notifier to initializer and then call CircuitSwitch::DueDateNotifier job daily. It will notify the list of currently registered switches.
By default, due_date is 10 days after today. To modify, set due_date to initializer.

GUI to manage switches

GUI

GUI is now only for Rails.
Add the following to your config/routes.rb and access /circuit_switch.

Rails.application.routes.draw do
  mount CircuitSwitch::Engine => 'circuit_switch'
end

Authentication

In production, you may need access protection.
With Devise, code goes like:

authenticate :user, lambda { |user| user.admin? } do
  mount CircuitSwitch::Engine => 'circuit_switch'
end

Contributing

Bug reports and pull requests are welcome on GitHub at https://github.com/makicamel/circuit_switch. This project is intended to be a safe, welcoming space for collaboration, and contributors are expected to adhere to the code of conduct.

License

The gem is available as open source under the terms of the MIT License.

Code of Conduct

Everyone interacting in the CircuitSwitch project's codebases, issue trackers, chat rooms and mailing lists is expected to follow the code of conduct.

About

circuit_switch is a gem for 'difficult' application. This switch helps to make changes easier and deploy safely.

Topics

Resources

License

Code of conduct

Stars

Watchers

Forks

Packages

No packages published