FEM: elmer unit tests, add ccx canti node load test

src/Mod/Fem/CMakeLists.txt

@@ -255,6 +255,7 @@ SET(FemTestsElmer_SRCS
     femtest/data/elmer/__init__.py
     femtest/data/elmer/case_mm.sif
     femtest/data/elmer/elmer_ccxcanti_faceload_mm.sif
+    femtest/data/elmer/elmer_ccxcanti_nodeload_mm.sif
     femtest/data/elmer/group_mesh.geo
     femtest/data/elmer/ELMERSOLVER_STARTINFO
 )

src/Mod/Fem/femtest/app/test_solver_elmer.py

@@ -153,6 +153,14 @@ def test_elmer_ccxcanti_faceload(
         setup(self.document, "elmer")
         self.elmer_inputfile_writing_test("elmer_ccxcanti_faceload")
 
+    # ********************************************************************************************
+    def test_elmer_ccxcanti_nodeload(
+        self
+    ):
+        from femexamples.ccx_cantilever_nodeload import setup
+        setup(self.document, "elmer")
+        self.elmer_inputfile_writing_test("elmer_ccxcanti_nodeload")
+
     # ********************************************************************************************
     def elmer_inputfile_writing_test(
         self,

src/Mod/Fem/femtest/data/elmer/elmer_ccxcanti_nodeload_mm.sif

@@ -0,0 +1,120 @@
+Check Keywords Warn
+
+Header
+  Mesh DB "."
+End
+
+Solver 1
+  Bubbles = Logical False
+  Calculate Pangle = Logical False
+  Calculate Principal = Logical False
+  Calculate Strains = Logical False
+  Calculate Stresses = Logical False
+  Displace mesh = Logical False
+  Eigen Analysis = Logical False
+  Eigen System Values = Integer 5
+  Equation = String "Elasticity"
+  Exec Solver = String "Always"
+  Linear System Abort Not Converged = Logical False
+  Linear System Convergence Tolerance = Real 1e-08
+  Linear System Iterative Method = String "BiCGStab"
+  Linear System Max Iterations = Integer 500
+  Linear System Precondition Recompute = Integer 1
+  Linear System Preconditioning = String "ILU0"
+  Linear System Residual Output = Integer 1
+  Linear System Solver = String "Iterative"
+  Optimize Bandwidth = Logical True
+  Procedure = File "StressSolve" "StressSolver"
+  Stabilize = Logical True
+  Steady State Convergence Tolerance = Real 1e-05
+  Variable = String "Displacement"
+  Variable DOFs = Integer 3
+End
+
+Simulation 
+  BDF Order = Integer 1
+  Coordinate Mapping(3) = Integer 1 2 3
+  Coordinate System = String "Cartesian 3D"
+  Output Intervals = Integer 1
+  Simulation Type = String "Steady state"
+  Steady State Max Iterations = Integer 1
+  Steady State Min Iterations = Integer 0
+  Timestepping Method = String "BDF"
+  Use Mesh Names = Logical True
+End
+
+Constants 
+End
+
+Body 1
+  Equation = Integer 1
+  Material = Integer 1
+  Name = String "Solid1"
+End
+
+Material 1
+  Density = Real 7.9e-06
+  Heat expansion Coefficient = Real 1.2e-05
+  Poisson ratio = Real 0.3
+  Youngs Modulus = Real 210000000.0
+End
+
+Equation 1
+  Active Solvers(2) = Integer 1 2
+End
+
+Solver 2
+  Equation = String "ResultOutput"
+  Exec Solver = String "After simulation"
+  Output File Name = File "case"
+  Procedure = File "ResultOutputSolve" "ResultOutputSolver"
+  Vtu Format = Logical True
+End
+
+Boundary Condition 1
+  Displacement 1 = Real 0.0
+  Displacement 2 = Real 0.0
+  Displacement 3 = Real 0.0
+  Name = String "Face1"
+End
+
+Boundary Condition 2
+  Force 1 = Real -0.0
+  Force 1 Normalize by Area = Logical True
+  Force 2 = Real -0.0
+  Force 2 Normalize by Area = Logical True
+  Force 3 = Real -9000000000.0
+  Force 3 Normalize by Area = Logical True
+  Name = String "Vertex5"
+End
+
+Boundary Condition 3
+  Force 1 = Real -0.0
+  Force 1 Normalize by Area = Logical True
+  Force 2 = Real -0.0
+  Force 2 Normalize by Area = Logical True
+  Force 3 = Real -9000000000.0
+  Force 3 Normalize by Area = Logical True
+  Name = String "Vertex6"
+End
+
+Boundary Condition 4
+  Force 1 = Real -0.0
+  Force 1 Normalize by Area = Logical True
+  Force 2 = Real -0.0
+  Force 2 Normalize by Area = Logical True
+  Force 3 = Real -9000000000.0
+  Force 3 Normalize by Area = Logical True
+  Name = String "Vertex7"
+End
+
+Boundary Condition 5
+  Force 1 = Real -0.0
+  Force 1 Normalize by Area = Logical True
+  Force 2 = Real -0.0
+  Force 2 Normalize by Area = Logical True
+  Force 3 = Real -9000000000.0
+  Force 3 Normalize by Area = Logical True
+  Name = String "Vertex8"
+End
+

src/Mod/Fem/femtest/test_commands.sh

@@ -83,6 +83,7 @@ make -j 4 && ./bin/FreeCADCmd -t femtest.app.test_result.TestResult.test_rho
 make -j 4 && ./bin/FreeCADCmd -t femtest.app.test_result.TestResult.test_disp_abs
 make -j 4 && ./bin/FreeCADCmd -t femtest.app.test_solver_calculix.TestSolverCalculix.test_solver_calculix
 make -j 4 && ./bin/FreeCADCmd -t femtest.app.test_solver_elmer.TestSolverElmer.test_solver_elmer
+make -j 4 && ./bin/FreeCADCmd -t femtest.app.test_solver_elmer.TestSolverElmer.test_elmer_ccxcanti_nodeload
 make -j 4 && ./bin/FreeCADCmd -t femtest.app.test_solver_elmer.TestSolverElmer.test_elmer_ccxcanti_faceload
 
 
@@ -318,6 +319,11 @@ unittest.TextTestRunner().run(unittest.TestLoader().loadTestsFromName(
     'femtest.app.test_solver_elmer.TestSolverElmer.test_solver_elmer'
 ))
 
+import unittest
+unittest.TextTestRunner().run(unittest.TestLoader().loadTestsFromName(
+    'femtest.app.test_solver_elmer.TestSolverElmer.test_elmer_ccxcanti_nodeload'
+))
+
 import unittest
 unittest.TextTestRunner().run(unittest.TestLoader().loadTestsFromName(
     'femtest.app.test_solver_elmer.TestSolverElmer.test_elmer_ccxcanti_faceload'