Z-Stack_3.x.0_coordinator_20230507

• Enable child aging to fix issues like #13478 (but not for older Xiaomi devices as they do not implement child aging correctly which gets them kicked out of the network)
• Increase message timeout from 7 to 8 seconds to increase message delivery success rate for devices using a 7.5 seconds poll interval (#13478)
• Improve performance with larger network
  • Optimize table sizes
  • Increase stack_size from 1024 to 8192
• Add firmware for CC1352P7 and CC2652R7
• SimpleLink SDK 7.10.00.98

Files: https://github.com/Koenkk/Z-Stack-firmware/tree/Z-Stack_3.x.0_coordinator_20230507/coordinator/Z-Stack_3.x.0/bin

Z-Stack_3.x.0_router_20221102

• Allow to set transmit power
• Fix directly connected Xiaomi devices disconnecting
• SimpleLink SDK 6.30.00.84 (changelog)

Files: https://github.com/Koenkk/Z-Stack-firmware/tree/Z-Stack_3.x.0_router_20221102/router/Z-Stack_3.x.0/bin

Z-Stack_3.x.0_coordinator_20221226

• Improve performance/reliability for larger network (100+ devices)
• Increase request retry attempts
• Increase routing table sizes
• SimpleLink SDK 6.10.01.01 (changelog)

Files: https://github.com/Koenkk/Z-Stack-firmware/tree/Z-Stack_3.x.0_coordinator_20221226/coordinator/Z-Stack_3.x.0/bin

Z-Stack_3.x.0_coordinator_20220219

• Fix Touchlink crash
• SimpleLink SDK 5.40.00.40 (changelog)

Files: https://github.com/Koenkk/Z-Stack-firmware/tree/Z-Stack_Home_3.x.0_coordinator_20220219/coordinator/Z-Stack_3.x.0/bin

Z-Stack_3.x.0_router_20220125

• SimpleLink SDK 5.30.01.01 (changelog)
• Increase memory heap
• Increase transmit power of CC1352P/CC2652P from 5dBm to 9dBm
• Support routing table command

Files: https://github.com/Koenkk/Z-Stack-firmware/tree/Z-Stack_Home_3.x.0_router_20220125/router/Z-Stack_3.x.0/bin

Z-Stack_3.x.0_coordinator_20211217

• SimpleLink SDK 5.30.01.01 (changelog)
• Increase memory heap
• Turn on/off leds when joining is enabled/disabled
• Fix Xiaomi E1 devices not (fully) working
• Allow setting transmit power for CC2652P/CC1352P greater than 5dBm (max 20dBm), default transmit power is set to 9dBm

Files: https://github.com/Koenkk/Z-Stack-firmware/tree/Z-Stack_Home_3.x.0_20211217/coordinator/Z-Stack_3.x.0/bin

Z-Stack_Home_1.2_coordinator_20211115/20211116

• Fix joining not working when joining is only permitted on specific router
• Forward message to host even when profileID does not match
• Turn on/off leds when joining is enabled/disabled
• Fix CC2530 crashing when sending large messages via UART
• Fix Xiaomi E1 devices not (fully) working

Files: https://github.com/Koenkk/Z-Stack-firmware/tree/Z-Stack_Home_1.2_20211115/20211116/coordinator/Z-Stack_Home_1.2/bin