/*
Version: V1.0
Author: Vincent
Create Date: 2020/9/9
Note:
*/
[toc]
Implement a 2048 game on "ESP32 Touch Camera". Change from ATmega328-Flappy-Bird-Clone.
This time, a capacitive screen was used for the game experience much better.
- ESP32 Touch Camera
Product link ： ESP32 Touch Camera(Resistive)
Product link ： ESP32 Touch Camera(Capacitive)
The ESP32 Touch Camera use ILI9488 screen, which comes with resistive or capacitive screens. Hava an OV2640 camera and SD card slot. It can be used as a webcam, an electronic album, or a digital camera. Support for Arduino and MicroPython.
-
Integrated ESP32 2.4G WiFi and Bluetooth.
-
Micro SD card slot on board.
-
Input 5.0V Type-C USB .
-
OV2640 is a 1/4 inch CMOS UXGA (1632*1232) image sensor manufactured by OmniVision.
-
LCD 3.5 inch Amorphous-TFT-LCD (Thin Film Transistor Liquid Crystal Display) for mobile-phone or handy electrical equipments.
-
NS2009 is A 4-wire resistive touch screen control circuit with I2C interface, which contains A 12-bit resolution A/D converter.
-
The FT6X36 Series ICs are single-chip capacitive touch panel controller IC with a built-in 16 bit enhanced Micro-controller unit (MCU).
If you have any questions，such as how to install the development board, how to download the code, how to install the library. Please refer to :Makerfabs_FAQ
- Install board : esp32 .
- Install library : lovyanGFX library.
- Upload file "/Project_ESP32-Flappy-Bird/ILI9488_bird/ILI9488_bird.ino"
- Touch To Play！
- Click on the first row with your finger the second and the third is up.
- Click with your finger on the fourth row and the second and third rows are down.
- Click on the first column with your finger and the second and third columns are left.
- Click on the fourth column with your finger and the second and third columns are right.
- Of course, you can also use your fingers to slide around from the middle four squares.
