APFS FUSE Driver for Linux

This project is a read-only FUSE driver for the new Apple File System. Since Apple didn't yet document the disk format of APFS, this driver should be considered experimental. It may not be able to read all files, it may return wrong data, or it may simply crash. Use at your own risk. But since it's read-only, at least the data on your apfs drive should be safe.

Be aware that not all compression methods are supported yet (only the ones I have encountered so far). Thus, the driver may return compressed files instead of uncompressed ones. Although most of the time it should just report an error.

Changelog

Date	Comment
2018-04-20	Added support for mounting DMGs
2018-04-14	Added support for partition tables (GPT only)
2018-04-10	Fixed and extended FileVault encryption support
2018-03-28	Added support for FileVault encryption
2017-10-25	Added support for encryption
2017-10-14	Initial version

Usage

Compile the source code

The following libraries are needed (including the -dev/-devel packages):

• FUSE 2.6 or greater
• ICU (Only on Linux)
• zlib
• bzip2
• libattr (on some Linux distributions)

Development tools:

• cmake
• gcc-c++ (or clang++)
• git (for cloning)

Example for Linux:

sudo apt update
sudo apt install fuse libfuse-dev libicu-dev bzip2 libbz2-dev cmake gcc-c++ git libattr1-dev

Clone the repository:

git clone https://github.com/sgan81/apfs-fuse.git
cd apfs-fuse
git submodule init
git submodule update

The driver uses Apple's lzfse library and includes it as a submodule.

Compile the driver:

mkdir build
cd build
cmake ..
make

After compilation, the binaries are located in bin.

Mount a drive

apfs-fuse <device> <mount-directory>

Supported options:

• -d n: If n > 0, enable debug output (see below for details).
• -o opts: Comma-separated list of mount options.
• -l: Lax mode: when unexpected data is encountered, try to continue, even if this means data returning potentially incorrect data.
• -v n: Instead of mounting the first volume in a container, mount volume n (starting at 0).
• -r recovery_key: Mount an encrypted volume by supplying a password or Personal Recovery Key (PRK).
• -s n: Find the container at offset n inside the device. This is useful when using an image file instead of a disk device, and therefore partitions are not exposed.
• -p n: Find the container at partition n inside the device.

If you are using an image file containing partitions, the driver will now detect if there is a valid GPT partition table. If there is, it will look for the first APFS partition and use that one for the container. If your drive contains more than one APFS container, you can specify the partition/container id with the -p option.

The device has to be the one containing the APFS container. If a container contains more than one volume, the volume can be specified by the -v option.

If a volume is encrypted, the apfs-fuse command will prompt for a password, unless a password or PRK is specified on the command line. The PRK can also be used as password.

NEW: It is now possible to directly mount DMG files. The driver will automatically detect if a dmg has to be mounted and take appropriate action. If a dmg is encrypted, you will be asked for the password. Note that dmg support is currently a bit slow (especially when compressed), but it should work properly.

The debug flags are now a combination of bits. So to enable specific output, you just add the numbers mentioned below together, and use the result as parameter for -d.

• 1 Display more information about errors
• 2 Display additional generic information
• 4 Display information about directory-related operations
• 8 Display information about on-the-fly compression
• 16 Display information about cryptographic operations (caution, displays keys as well)

Unmount a drive

fusermount -u <mount-directory>

Features

The following features are implemented:

• Can read macOS 10.13 case sensitive and insensitive volumes, as well as iOS 11 / macOS 10.12 volumes
• Transparent decompression of ZLib and LZVN
• Symlinks
• Hardlinks (it seems ...)
• Extended attributes
• Encryption (at least full-disk encryption)
• Automatic detection of GPT partition tables
• NEW: Direct mounting of DMG images (supports zlib/adc compression and encryption)

Limitations

These things are not supported (yet):

• Transparent decompression of LZFSE
• Writing

Debugging

Since the driver is still experimental and based on analysis of a limited set of drives / volumes, crashes may unfortunately still happen. If a crash happens, providing me with useful information can be very helpful.

One of the most important pieces of information is the location where the program crashed. You can find that out by debugging the tool. In order to debug the program, do the following:

Change the main CMakeLists.txt as follows: In the line set(CMAKE_BUILD_TYPE Release), replace Release with Debug.

Rebuild everything.

Run it under gdb. Like this:

gdb apfs-fuse

(In gdb):
set args <options> <device> <mount-directory>
run

(And if/when it crashes):
backtrace

(When you're finished):
quit

And then send the output of backtrace to me. Adding -d 1 to options might help as well, but be aware that it will generate a lot of output on the text console.

Some tools that might be useful

If you encounter problems with some file, it may be that I overlooked something during reverse engineering. In that case, you can use the apfs-dump-quick command to dump the management structures of the whole drive. It can be run as follows:

apfs-dump-quick <drive> <logfile.txt>

The tool will dump the most current version of the disk structures into a logfile. This file can become quite big, like a few 100 MB. So to limit the amount of information to report, look for the name of the file in the log. Try to find a line starting with File and containing the filename. The number immediately after File is the ID. Find all lines having this ID, and include them in your bug report.

There is another command available:

apfs-dump <drive> <logfile.txt>

This tool was the one I originally used for reverse engineering. It will scan the whole volume for clusters having correct checksums (and thus being part of some management structure), and then it will try to dump them. This will take a very long time to run on big volumes, and create huge log files. So using the quick version will be much faster.