cleanup UCS Webui chapter

manuals/en/main/operating-system-univention-corporate-server.tex

@@ -65,13 +65,23 @@ \subsubsection{UCR variables}
 	\item[no] don't backup the server itself
 	\item[yes] backup the server itself
       \end{description}
-    \item[\parameter{bareos/webui/console/user1/username}]: admin (default)
-      \end{description}
-    \item[\parameter{bareos/webui/console/user1/password}]: none (default)
-      \end{description}
+        \item[\parameter{bareos/webui/console/user1/username}]: admin (default)
+      \begin{itemize}
+        \item User name to login at the bareos-webui
+      \end{itemize}
+        \item[\parameter{bareos/webui/console/user1/password}]: (no default value)
+      \begin{itemize}
+        \item Password to login at the bareos-webui
+      \end{itemize}
     \end{description}
 
-UCR variables can be set via the Univention Configuration Registry Web interface or via command line:
+UCR variables can be set via the Univention Configuration Registry Web interface 
+
+\begin{center}
+  \includegraphics[width=0.8\textwidth]{\idir univention-configuration-registry-settings}
+\end{center}
+
+or using the \command{ucr} command line tool:
 \begin{commands}{Enable backup of the server itself}
 root@ucs:~# <input>ucr set bareos/backup_myself=yes</input>
 Setting bareos/backup_myself
@@ -98,7 +108,8 @@ \subsubsection{Setup}
 
 \subsubsection{Administration}
 
-The administration takes place in the \command{bconsole}:
+For general tasks the \ilink{bareos-webui}{sec:webui} can be used.
+Additional, there is the \command{bconsole} command line tool:
 
 \begin{commands}{Starting the bconsole}
 root@ucs:~# <input>bconsole</input>
@@ -108,6 +119,7 @@ \subsubsection{Administration}
 *
 \end{commands}
 
+For general information, see the \ilink{Bconsole Tuturial}{sec:TuturialBconsole}.
 
 
 \subsubsection{Backup Schedule}
@@ -227,7 +239,7 @@ \subsubsection{Client and backup job management}
 The settings for each job resource are set by the job definition from the bareos-director default configuration and the template files you see above. The client configuration file contains, as you can see below, the connection information and the job information:
 
 \begin{commands}{}
-root@ucs:/etc/bareos/autogenerated/clients# <input>cat testw2.antares.de.include</input>
+root@ucs:/etc/bareos/autogenerated/clients# <input>cat testw2.example.com.include</input>
 Client {
  Name = "testw2.example.com-fd"
  Address = "testw2.example.com"
@@ -246,29 +258,29 @@ \subsubsection{Client and backup job management}
  }
 \end{commands}
 
-\paragraph{Bareos Webui Configuration}$\;$
+\subsubsection{Bareos Webui Configuration}
 
-After installation you just need to setup your login credentials via UCR variables. Therefore, set the Univention configuration registry (UCR) variable bareos/webui/console/user1/username and
-bareos/webui/consoles/user1/password according to your needs. The director configuration is automatically reloaded if one of those two variables changes.
+After installation you just need to setup your login credentials via UCR variables.
+Therefore, set the Univention configuration registry (UCR) variable
+\parameter{bareos/webui/console/user1/username} and
+\parameter{bareos/webui/consoles/user1/password}
+according to your needs. The director configuration is automatically reloaded if one of those two variables changes.
 
-\begin{center}
-  \includegraphics[width=0.8\textwidth]{\idir univention-configuration-registry-settings}
-\end{center}
 
 Alternatively you can also set those UCR variables via commandline.
 
 \begin{commands}{Example for changing webui login credentials}
-root@ucs:~# <input>ucr set bareos/webui/console/user1/password="bareos"</input>
-Setting bareos/webui/console/user1/password
-File: /etc/bareos/bareos-dir.conf
-[ ok ] Reloading Bareos Director: bareos-dir.
 root@ucs:~# <input>ucr set bareos/webui/console/user1/username="bareos"</input>
 Setting bareos/webui/console/user1/username
 File: /etc/bareos/bareos-dir.conf
 [ ok ] Reloading Bareos Director: bareos-dir.
+root@ucs:~# <input>ucr set bareos/webui/console/user1/password="secret"</input>
+Setting bareos/webui/console/user1/password
+File: /etc/bareos/bareos-dir.conf
+[ ok ] Reloading Bareos Director: bareos-dir.
 \end{commands}
 
-When your login credentials are set, you can login into Bareos Webui by following the entry in your Administration UCS Overview.
+When your login credentials are set, you can login into Bareos Webui by following the entry in your Administration UCS Overview or directly via \url{https://<UCS_SERVER>/bareos-webui/}.
 
 \begin{center}
   \includegraphics[width=0.8\textwidth]{\idir univention-ucs-overview-administration}

manuals/en/main/tutorial.tex

@@ -111,6 +111,8 @@ \section{Starting the Daemons}
 
 \section{Using the Director to Query and Start Jobs}
 
+\label{sec:TuturialBconsole}
+
 To communicate with the director and to query the state of Bareos or run jobs,
 from the top level directory, simply enter: