A node.js library for epaper displays using spi. Raspberry Pi port of node-epaper
Connect the device. Install the node modules using npm install
or similar. Make sure you have gpio
installed. It's part of wiringPi.
Then look in /examples/
for a couple files. loadPng.js
and loadEpd.js
can both be used with a file specified in the commandline, such as loadEpd.js images/text.epd
- Keep the SPI cables short
- Try lower clock speeds in case of failure
Item | Details |
---|---|
EPD | Pervasive Displays MpicoSys C-P74-110_v1.1 7.4" supported |
CPU | RPI 3B |
Connection | Ribbon cable |
Cable connects as follows:
EPD pin | RPI Physical Pin |
---|---|
GND | 6 |
/EN | 12 |
VDDIN | 1 |
VIN | 2 |
BUSY | 16 |
MISO | 21 |
MOSI | 19 |
/CS | 24 |
SCK | 23 |
GND | 34 |