Skip to content

marcinbor85/can-prog

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

77 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

canprog

Command-line tool to flashing devices by CAN-BUS.

Main features

  • Support STM32 CAN-BUS ROM bootloader
  • Easily expand with other CAN-BUS protocols
  • Support iHEX and binary format files
  • Object oriented architecture
  • Command-line interface
  • Socket-CAN driver for CAN-BUS low level operations

Todo

  • Other microcontroller protocols
  • Other CAN-BUS interfaces
  • Autocalculating sectors for erasing (for STM32)
  • Memory write protect/unprotect (form STM32)
  • TDD tests

Requirements

  • Compatible PC CAN-BUS adapter
  • Linux + Python3
  • Enabled SocketCAN driver
  • Board with STM32 with CAN interface

Driver instalation

modprobe can
modprobe can-raw
modprobe slcan
slcand -o -c -f -s4 /dev/ttyUSB0 slcan0
ip link set up slcan0

App instalation

sudo pip install canprog

Usage:

General usage + configuration

usage: canprog [-h] [--verbose] [--version] [-n NAME] [-i {socketcan}]
               [-f {hex,bin}]
               {stm32} ...

Command-line tool to flashing devices by CAN-BUS.

others:
  -h, --help      show this help message and exit
  --verbose       enable verbose output
  --version       show program's version number and exit

configuration:
  -n NAME         interface name (default: slcan0)
  -i {socketcan}  interface type (default: socketcan)
  -f {hex,bin}    file format (default: hex)

protocols:
  {stm32}
    stm32         STM32 ROM bootloader

STM32 bootloader options

usage: canprog stm32 [-h] {write,read,erase,go,lock,unlock} ...

others:
  -h, --help            show this help message and exit

commands:
  {write,read,erase,go,lock,unlock}
    write               write file to target memory
    read                read target memory to file
    erase               erase target memory
    go                  start program application
    lock                enable readout protection
    unlock              disable readout protection
    speed               change the can baud rate the boot rom uses

Usage examples:

canprog stm32 write image.hex
canprog -f bin stm32 write image.bin -a 0x08000000
canprog stm32 read dump.hex -s 0x200
canprog stm32 lock
canprog stm32 erase -P 0 1 2 3

Example output:

[13:41:25.931] main INFO: Connecting target
[13:41:25.935] stm32 INFO: Bootloader initialized
[13:41:25.944] stm32 INFO: Bootloader version: 2.0
[13:41:25.947] stm32 INFO: Read protection: 0x0000
[13:41:25.950] stm32 INFO: Chip ID: 0x0413 - STM32F40xxx/41xxx
[13:41:25.950] main INFO: Connected
[13:41:25.958] main INFO: Writing memory at 0x08000000:6548
[13:41:25.958] stm32 INFO: Progress: 0%
[13:41:26.201] stm32 INFO: Progress: 11%
[13:41:26.429] stm32 INFO: Progress: 23%
[13:41:26.657] stm32 INFO: Progress: 35%
[13:41:26.895] stm32 INFO: Progress: 46%
[13:41:27.136] stm32 INFO: Progress: 58%
[13:41:27.371] stm32 INFO: Progress: 70%
[13:41:27.617] stm32 INFO: Progress: 82%
[13:41:27.908] stm32 INFO: Progress: 93%
[13:41:28.065] stm32 INFO: Progress: 100%
[13:41:28.065] main INFO: Successful
[13:41:28.065] main INFO: Writing memory at 0x08004000:16
[13:41:28.065] stm32 INFO: Progress: 0%
[13:41:28.074] stm32 INFO: Progress: 100%
[13:41:28.074] main INFO: Successful
[13:41:28.074] main INFO: Disconnecting target
[13:41:28.074] main INFO: Disconnected