Receiver

This is a lightweight streaming client that works together with streamer server. It receives encoded HEVC bitstream over tcp connection, decodes it using Intel Media SDK, and renders the resulting buffers using Wayland. Everything is done hardware-accelerated and zero-copy. Receiver listens for input events from a Wayland compositor, converts those to UHID messages, and sends those to streamer server over the same tcp connection.

Receiver can also receive an audio stream captured by the streamer, if the latter is built with pipewire support. Audio is streamed uncompressed to improve the latency.

Building on Linux

Receiver depends on following libraries:

• libpipewire-0.3
• libva
• libva-drm
• mfx
• wayland-client

Once you have these installed, just

make

Building anywhere else

I don't care about any other platforms except Linux, so you are on your own. Moreover, I don't really expect it would work anywhere else.

Running

There are couple of things receiver implies, i.e. that your system is supported by Intel Media SDK. Wayland compositor is expected to support following protocols:

• linux-dmabuf-unstable-v1,
• pointer-constraints-unstable-v1,
• relative-pointer-unstable-v1,
• xdg-shell.

This is certainly the case with any recent Intel CPU and sway compositor. It would probably work with other wlroots-based compositors too. I never cared enough to check if Intel Media SDK works on AMD systems. In case it does, receiver would work on AMD hardware as well. Nvidia configurations are certainly not supported. Not just VA-API, but also linux-dmabuf-unstable-v1 Wayland protocol are not expected to work. So no Nvidia please.

Provide ip address and port number of listening streamer instance on the commandline:

./receiver 192.168.8.5:1337

Basic stats reporting is available in the receiver. It should be taken with a grain of salt tho. Receiver is unaware of the exact networking configuration, and some values are implied. I.e. for the video latency, 100MBit networking speed is used in calculations. As for the audio latency, it does not account for the latency of the actual output device, i.e. for Bluetooth headsets the latency could be 100-150ms higher than the reported one. To activate stats overlay nonetheless, add the corresponding commandline option:

./receiver 192.168.8.5:1337 --stats

If you want to receive an audio stream, and streamer is built and run with the respective options, provide the audio rinbuffer size in samples on the commandline. I.e. 100ms buffer looks like a good starting point, so for 48000 sample rate you can use following commandline (4800 samples is 100ms for 48000 sample rate):

./receiver 192.168.8.5:1337 --stats --audio 4800

What about Steam Link?

For a long time I was suffering from various issues with Steam Link:

• client builtin into usual desktop steam client does not support hardware-accelerated video decoding,
• decicated steam link application is redistributed as a flatpak, and requires to install related bloatware,
• streaming occasionally crashes on server-side bringing down Steam together with streamed game,
• using a mouse wheel makes server-side Steam to crash immediately together with streamed game,
• only back screen is streamed unless server-side Steam is running in big picture mode,
• one of recent updates broke streaming entirely, producing black screen even when running server-side in big picture mode,
• many other minor issues...

What about Sunshine/Moonlight?

I tried this one too. Issues there are not as severe as with Steam Link, but still:

• relies on Qt, boost and other questionable technologies,
• does not properly propagate mouse wheel events making it pretty much unusable,
• video quality occasionally degrades into a blurry brownish mess and never recovers,
• extremely thin Moonlight video-related configuration options are seem to be ignored entirely by Sunshine,
• Sunshine crashed on me when I attempted to stream a game running with Proton.

Fancy features support status

There are no fancy features in streamer. There's no bitrate control - VA-API configuration selects constant image quality over constant bitrate. There's no frame pacing - because I personally consider it useless for low-latency realtime streaming. There's no network discovery. There's no automatic reconnection. There's no codec selection. There's no fancy configuration interface. I might consider implementing some of that in the future - or might not, because it works perfectly fine for my use-case in its current state.

At the same time, it addresses all of the issues listed above for Steam Link and Sunshine/Moonlight. No issues with controls, no issue with video quality, no issues with screen capturing. On top of that instant startup and shutdown both on server- and client-side.

Where is toolbox and pui?

Note, that I don't use github for actual development anymore - it's just a mirror these days. Instead, I self-host git repos on https://burakov.eu. Read-only access is provided via cgit, i.e.: https://burakov.eu/receiver.git. Same stands for toolbox and pui (primitive ui) submodules, which are fetched via https using git commandline. You can as well access the code of toolbox and pui directly using your browser: https://burakov.eu/toolbox.git, https://burakov.eu/pui.git.