Releases: obniz/obniz
Releases · obniz/obniz
v3.31.0
v3.30.1
v3.30.0
v3.29.0
v3.28.0
v3.27.0
v3.26.0
Parts
- Add motion sensor EMDCB to parts list
- Add phy information to advertisements during BLE scan (for Long Range)
Parts
- 人感センサEMDCBをパーツに追加
- ble scan時のadvertismentにphy情報の付与（LongRange判定の追加)
Full Changelog: v3.25.0...v3.26.0
v3.25.0
Parts
- Add new parts: DR MARK ( Thanks to @wamisnet )
- Fix 2jcie isDevice return type
- Fix MT-500BT cnkey Zero-padded 4-digit ( Thanks to @megadreams14 )
- Update RS-BTEVS1 v1.2.2 supported
Parts
- 新パーツDR MARKを追加 ( Thanks to @wamisnet )
- 2jcieのisDeviceを修正
- MT-500BTのキーが4桁の場合のゼロパディングを修正 ( Thanks to @megadreams14 )
- RS-BTEVS1のファームウェアバージョンv1.2.2をサポート
Full Changelog: v3.24.0...v3.25.0
Contributors
megadreams14 and wamisnet
Assets 2
v3.24.0
Fix
- Fixed obniz.connectionState being connected when obnizOffline error
- Fixed broken links in each readme
- Fixed possibility of multiple pairing processes running at the same time in BLE
Parts
- Fixed btevs1 not supporting some firmware versions
- Removed unused functions from enertalk
- Updated readme of MESH Blocks
Fix
- obnizOfflineエラーのとき、obniz.connectionStateがconnectedになっているのを修正
- 各readmeのlink切れを修正
- BLEでペアリングプロセスが複数同時に走る可能性があるのを修正
Parts
- btevs1が一部ファームウェアバージョンに対応していないのを修正
- enertalkの未使用の関数を削除
- MESH Blocksのreadmeをupdate
Full Changelog: v3.23.0...v3.24.0
v3.23.0
Feature
- Support ble service data
- Add Ble hci timeout error message
- Ble data take care about the significant figures.
Fix
- Ble notify setting some device cannot set (If device cannot support 2902 descriptor).
Parts
- Add new parts MESH Blocks
- Add new parts MM_BLEBC5
- Fix Puls08M5stickcS example
- Support RS_BTEVS1 firmware 1.1.2
Feature
- BLEのservice data に対応
- Bleのhci timeout時のエラメッセージの可読性向上
- Bleでデータを取得した際の小数点以下の計算誤差に対応
Fix
- BLEの2902ディスクリプタに対応していないnotification/indicationに対応
Parts
- MESH ブロックを追加
- 加速度センサMM_BLEBC5を追加
- Puls08M5stickcSのサンプルプログラムを修正
- RS_BTEVS1 firmware 1.1.2に対応
Full Changelog: v3.22.0...v3.23.0