v1.39

Raspberry Pi 3 UEFI Firmware v1.39

• This release should fix the rainbow screen issues on reboot when using some SD cards (#17, #24)

v1.38

Raspberry Pi 3 UEFI Firmware v1.38

v1.37

Raspberry Pi 3 UEFI Firmware v1.37

• Always use non translating DMA in DT mode [tianocore/edk2-platforms@efff29c]
• Make sure normal memory is not be marked uncached [tianocore/edk2-platforms@af649f8]
• Make sure all drivers are disconnected before reboot [tianocore/edk2-platforms@63d520f]
• Fix ACPI MMIO host bridge window attribute [tianocore/edk2-platforms@ab6fcc2]

v1.36

Raspberry Pi 3 UEFI Firmware v1.36

v1.35

Raspberry Pi 3 UEFI Firmware v1.35

• Update TF-A binaries to version 2.5 [tianocore/edk2-non-osi@e1bb27f]
• Ensure that ACPI reflects the UART setup from config.txt [tianocore/edk2-platforms@ea709f1]
• Enable Bluetooth and UART in Windows OS [tianocore/edk2-platforms@086a3a3]

v1.34

Raspberry Pi 3 UEFI Firmware v1.34

• Update Cypress WiFi firmware binaries to latest
• Revert to full device discovery during init by default, and add new "Fast Boot" feature for partial discovery [tianocore/edk2-platforms@efdc159]

v1.33

Raspberry Pi 3 UEFI Firmware v1.33

v1.32

Raspberry Pi 3 UEFI Firmware v1.32

• Switch back to the old coloured logo [tianocore/edk2-non-osi@3d1bb66]
• Fix cursor appearing on top of logo [tianocore/edk2@b585238]

v1.31

Raspberry Pi 3 UEFI Firmware v1.31

• Add CM3 Device Tree binary
• Add IORT ACPI table [tianocore/edk2-platforms@dac891d]
• Fix incorrectly mapped 640x480 and 800x600 display resolutions [tianocore/edk2-platforms@38c387d]
• Update JTAG pinout [tianocore/edk2-platforms@8ef23e8]

v1.30

Raspberry Pi 3 UEFI Firmware v1.30

• Internal improvements

NOTE: This firmware archive was altered from the AppVeyor produced version in order to use an older version of start.elf/fixup.dat on account of another regression introduced with raspberrypi/firmware#1445