Skip to content

sclasen/akka-kafka

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

akka-kafka

Build Status

Actor based kafka consumer built on top of the high level kafka consumer.

The 0.0.X versions of akka-kafka were built with kafka 0.8.1.1. Starting with 0.1.0 akka-kafka is built against the scala 2.11 version of kafka 0.8.2.0

AkkaConsumer

Manages backpressure so the consumer doesn't overwhelm other parts of the system. The consumer allows asynchronous/concurrent processing of a configurable, bounded number of in-flight messages.

You can configure the connector to commit offsets at a configurable interval, after a configured number of messages are processed, or simply commit the offsets programatically. It waits until all in flight messages are processed at commit time, so you know that everything that's committed has been processed.

AkkaBatchConsumer

Configured and used very similarly to the AkkaConsumer but it accumulates a batch of messages, with a configured maximum size and timeout, and sends the batch to your ActorRef, you reply with BatchConnectorFSM.BatchProcessed and the batch consumer will commit the batch and accumulate a new one.

use

Add the dependencies to your project. akka-kafka by default excludes kafka's logging dependencies, in favor of slf4j, but does so without forcing you to do the same, so you need to add a dependency that brings in log4j or slf4j's log4j.

If you dont want to use slf4j, you can substitute log4j.

/* build.sbt */

libraryDependencies += "com.sclasen" %% "akka-kafka" % "0.1.0" % "compile"

libraryDependencies += "com.typesafe.akka" %% "akka-slf4j" % "2.3.9" % "compile"

libraryDependencies += "org.slf4j" % "log4j-over-slf4j" % "1.7.10" % "compile"

AkkaConsumer

To use this consumer you must provide it with an actorRef that will receive messages from kafka, and will reply to the sender with StreamFSM.Processed after a message has been successfully processed. If you do not reply in this way to every single message received, the connector will not be able to drain all in-flight messages at commit time, and will hang.

Note that the sender in this case is not the ConnectorFSM actor, but one of the StreamFSM actors that are the connector's children. You need to reply to the sender(), a StreamFSM rather than the connector itself so each stream can track the number of outstanding messages correctly.

Here is an example of such an actor that just prints the messages.

class Printer extends Actor{

  def receive = {
    case x:Any =>
      println(x)
      sender ! StreamFSM.Processed
  }

}

The consumer is configured with an instance of AkkaConsumerProps, which looks like this.

case class AkkaConsumerProps[Key,Msg](system:ActorSystem,
                                      actorRefFactory:ActorRefFactory,
                                      connectorActorName:Option[String],
                                      zkConnect:String,
                                      topicFilterOrTopic:Either[TopicFilter, String],
                                      group:String,
                                      streams:Int,
                                      keyDecoder:Decoder[Key],
                                      msgDecoder:Decoder[Msg],
                                      msgHandler: (MessageAndMetadata[Key,Msg]) => Any,
                                      receiver: ActorRef,
                                      maxInFlightPerStream:Int = 64,
                                      startTimeout:Timeout = Timeout(5 seconds),
                                      commitConfig:CommitConfig = CommitConfig())

case class CommitConfig(commitInterval:Option[FiniteDuration] = Some(10 seconds),
                        commitAfterMsgCount:Option[Int] = Some(10000),
                        commitTimeout:Timeout = Timeout(5 seconds))

there are 4 helper methods on the AkkaConsumerProps object that ease the construction of AkkaConsumerProps.

Use AkkaConsumerProps.forSystem(system = ...) when you only need a single connector in your application. The connector will be created as a top level actor.

Use AkkaConsumerProps.forContext(context = ...) when you want to have multiple connectors in your application, or you want the connector to be a child of one of your actors.

Use AkkaConsumerProps.forSystemWithFilter(system = ...) for using a TopicFilter, when you only need a single connector in your application. The connector will be created as a top level actor.

Use AkkaConsumerProps.forContextWithFilter(context = ...) for using a TopicFilter, when you want to have multiple connectors in your application, or you want the connector to be a child of one of your actors.

So a full example of getting a consumer up and running looks like this.

import akka.actor.{Props, ActorSystem, Actor}
import com.sclasen.akka.kafka.{AkkaConsumer, AkkaConsumerProps, StreamFSM}
import kafka.serializer.DefaultDecoder

object Example {
  class Printer extends Actor{
    def receive = {
      case x:Any =>
        println(x)
        sender ! StreamFSM.Processed
    }
  }

  val system = ActorSystem("test")
  val printer = system.actorOf(Props[Printer])


  /*
  the consumer will have 4 streams and max 64 messages per stream in flight, for a total of 256
  concurrently processed messages.
  */
  val consumerProps = AkkaConsumerProps.forSystem(
    system = system,
    zkConnect = "localhost:2181",
    topic = "your-kafka-topic",
    group = "your-consumer-group",
    streams = 4, //one per partition
    keyDecoder = new DefaultDecoder(),
    msgDecoder = new DefaultDecoder(),
    receiver = printer
  )

  val consumer = new AkkaConsumer(consumerProps)

  consumer.start()  //returns a Future[Unit] that completes when the connector is started

  consumer.commit() //returns a Future[Unit] that completes when all in-flight messages are processed and offsets are committed.

  consumer.stop()   //returns a Future[Unit] that completes when the connector is stopped.

}

configure

The reference.conf file is used to provide defaults for the properties used to configure the underlying kafka consumer.

To override any of these properties, use the standard akka application.conf mechanism.

Note that the property values must be strings, as that is how kafka expects them.

Do NOT set the consumer.timeout.ms to -1. This will break everything. Don't set auto.commit.enable either.

kafka.consumer {
    zookeeper.connection.timeout.ms = "10000"
    auto.commit.enable = "false"
    zookeeper.session.timeout.ms = "1000"
    zookeeper.sync.time.ms =  "1000"
    consumer.timeout.ms =  "400"
}

AkkaBatchConsumer

To use this consumer you must provide it with an actorRef that will receive a Batch of messages from kafka, and will reply to the sender with BatchConnectorFSM.BatchProcessed after a batch has been successfully processed. If you do not reply in this way to every single batch received, the connector will not be able to commit the batch, and will hang.

AkkaBatchConsumerProps has similar convenience methods to AkkaConsumerProps

So a full example of getting a batch consumer up and running looks like this.

import akka.actor.{Props, ActorSystem, Actor}
import com.sclasen.akka.kafka.{AkkaBatchConsumer, AkkaBatchConsumerProps, BatchConnectorFSM}
import kafka.serializer.DefaultDecoder

//object BatchExample {
  class BatchPrinter extends Actor{
    def receive = {
      case MyBatch(xs) =>
        xs.foreach(println)
        sender ! BatchConnectorFSM.BatchProcessed
    }
  }

  type B = Array[Byte]

  case class MyBatch(msgs: IndexedSeq[String])

  /*provide a function that makes your batch object from an IndexedSeq of messages, if desired.*/
  def makeBatch(msgs: IndexedSeq[String]):MyBatch = MyBatch(msgs)

  /*provide a function that transforms the kafka message payload, if desired.*/
  def messageHandler(msg: Array[Byte]):String = new String(msg)

  val system = ActorSystem("batchTest")
  val printer = system.actorOf(Props[BatchPrinter])


  /*
  the consumer will have 4 streams and accumulate a batch of up to 1000 messages before sending the batch.
  if no message is received for 1 second, the partial batch is sent instead.
  */
  val consumerProps = AkkaBatchConsumerProps.forSystem[B,B,String,MyBatch](
    system = system,
    zkConnect = "localhost:2181",
    topic = "your-kafka-topic",
    group = "your-consumer-group",
    streams = 4, //one per partition
    keyDecoder = new DefaultDecoder(),
    msgDecoder = new DefaultDecoder(),
    msgHandler = messageHandler(_),
    batchHandler = makeBatch(_),
    receiver = printer
  )

  val consumer = new AkkaBatchConsumer(consumerProps)

  consumer.start()  //returns a Future[Unit] that completes when the connector is started

  consumer.stop()   //returns a Future[Unit] that completes when the connector is stopped.

}

AkkaDirectConsumer

This consumer is based on Kafka High Level Consumer. This consumer creates N threads per topic where N = streams. Each thread will block on the iterator until a message becomes available. Messages are then forwarded to your receiving actor in the same manor.

This actor overrides settings for both:

consumer.timeout.ms = "-1"
auto.commit.enable = "true"

This will not affect the configured values for other actors [AkkaBatchConsumer, AkkaConsumer] and thus you can use both styles of actors in the same project to fit your needs.

This consumer is suitable for low volume messages that require minimal latency (eg: Instant Messaging applications)

Some notes on blocking:

AkkaDirectConsumerProps has similar convenience methods to AkkaConsumerProps

So a full example of getting a high level consumer up and running looks like this.

import akka.actor.{Props, ActorSystem, Actor}
import com.sclasen.akka.kafka.{AkkaDirectConsumer, AkkaDirectConsumerProps}
import kafka.serializer.DefaultDecoder

object Example {
  class Printer extends Actor{
    def receive = {
      case x:Any =>
        println(x)
        sender ! StreamFSM.Processed
    }
  }

  val system = ActorSystem("test")
  val printer = system.actorOf(Props[Printer])

  /*
  the consumer will have 4 streams (threads that block per topic)
  */
  val consumerProps = AkkaDirectConsumerProps.forSystem(
    system = system,
    zkConnect = "localhost:2181",
    topic = "your-kafka-topic",
    group = "your-consumer-group",
    streams = 4, //one per partition
    keyDecoder = new DefaultDecoder(),
    msgDecoder = new DefaultDecoder(),
    receiver = printer
  )

  val consumer = new AkkaConsumer(consumerProps)

  consumer.start()  //returns a Future[Unit] that completes when the connector is started

  consumer.stop()   //returns a Future[Unit] that completes when the connector is stopped.

}

develop

Assumes you have forego installed. if not, go get github.com/ddollar/forego

./bin/setup         #installs kafka to ./kafka-install
cp .env.sample .env #used by forego to set your env vars
forego start        #starts zookeeper and kafka

In another shell

forego run sbt

About

No description, website, or topics provided.

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Contributors 4

  •  
  •  
  •  
  •