This is the version for Arduino 1.6.5 and upwards
for older versions check the branch arduino_1-0
This repository contains the hardware definitions and MiniBee firmware for the SenseStage boards to use within Arduino. These adaptations are necessary for revision B (and up) of the SenseStage MiniBee, as this revision uses a different clock than any of the default Arduino boards.
For revision A (only in possession of a few early testers), you can select to use the “LilyPad Arduino w/ ATmega168″ or “Arduino Pro or Pro Mini (3.3V, 8 MHz), w/ ATmega168″ instead.
- Unarchive the package.
- In there you will find a folder called
hardware
. - Copy the folder (including all the contents) to the root of your Arduino Sketch folder. If you have already a
hardware
folder in there, then copy the “minibee” folder that is in the downloaded package'shardware
folder to it. - You will also find a folder called
libraries
in the downloaded package. - Copy the folder (including all the contents) to the root of your Arduino Sketch folder. If you have already a
libraries
folder in there, then copy theMiniBee
folder that is in the downloaded package’slibraries
folder to it. - (Re)start the Arduino IDE.
- The MiniBee Boards will show up in the Tools -> Board ->.
- The MiniBee Firmware examples will show up in the: AT-mode: File -> Examples -> MiniBee, and the MiniBee Firmware library will show up in Sketch -> Import Library… -> MiniBee API-mode (recommended) File -> Examples -> MiniBeeAPIn, and the MiniBee Firmware library will show up in Sketch -> Import Library… -> MiniBeeAPIn
It is recommended to use the API version of the firmware, as this is the one that is currently being developed.
See also: https://docs.sensestage.eu/minibee/prepare-the-arduino-ide-for-use-with-sense-stage.html