Releases: simh/simh
v4.0-devel
Development of functionality and features beyond Bob's editing role.
simh v3.9-0
Notes For V3.9
The makefile now works for all *nix platforms and with cygwin and MinGW32
on Windows. It will automatically detect the availability of libpcap
components and build network capable simulators if they are available.
- New Features
1.1 3.9-0
1.1.1 SCP and libraries
- added *nix READLINE support (Mark Pizzolato)
- added "SHOW SHOW" and "SHOW <dev> SHOW" commands (Mark Pizzolato)
- added support for BREAK key on Windows (Mark Pizzolato)
- added ethernet support (Mark Pizzolato)
windows host <-> simulator NIC sharing
native tap interfaces on BSD, Linux and OSX
vde (Virtual Distributed Ethernet) networking
Large Send Offload support
UDP and TCP Checksum offload support
dynamic libpcap loading on *nix platforms
1.1.2 PDP-8
- floating point processor is now enabled
1.1.3 HP2100 (Dave Bryan)
- added support for 12821A HP-IB disk controller,
7906H/20H/25H disks
1.1.4 PDP11 and VAX (Mark Pizzolato)
- added DELQA-Plus device
1.1.5 IA64 VMS Ethernet Support
- identified compiler version issues and added IA64 support (Matt Burke)
- Bugs Fixed
Please see the revision history on http://simh.trailing-edge.com or
in the source module sim_rev.h.
- Status Report
This is the last release of SimH for which I will be lead editor. After this
release, the source is moving to a public repository:
https://github.com/simh/simh
under the general editorship of Dave Hittner and Mark Pizzolato. The status
of the individual simulators is as follows:
3.1 PDP-1
Stable and working; runs available software.
3.2 PDP-4/7/9/15
Stable and working; runs available software.
3.3 PDP-8
Stable and working; runs available software.
3.4 PDP-10 [KS-10 only]
Stable and working; runs available software.
3.5 PDP-11
Stable and working; runs available system software. The emulation of individual
models has numerous errors of detail, which prevents many diagnostics from
running correctly.
3.6 VAX-11/780
Stable and working; runs available software.
3.7 MicroVAX 3900 (VAX)
Stable and working; runs available software. Thanks to the kind generosity of
Camiel Vanderhoeven, this simulator has been verified with AXE, the VAX
architectural exerciser.
3.8 Nova
Stable and working; runs available software.
3.9 Eclipse
Stable and working, but not really supported. There is no Eclipse-specific
software available under a hobbyist license.
3.10 Interdata 16b
Stable and working, but no software for it has been found, other than
diagnostics.
3.11 Interdata 32b
Stable and working; runs 32b UNIX and diagnostics.
3.12 IBM 1401
Stable and working; runs available software.
3.13 IBM 1620
Hand debug only. No software for it has been found or tested.
3.14 IBM 7094
Stable and working as a stock system; runs IBSYS. The CTSS extensions
have not been debugged.
3.15 IBM S/3
Stable and working, but not really supported. Runs available software.
3.16 IBM 1130
Stable and working; runs available software. Supported and edited by
Brian Knittel.
3.17 HP 2100/1000
Stable and working; runs available software. Supported and edited by
Dave Bryan.
3.18 Honeywell 316/516
Stable and working; runs available software.
3.19 GRI-909/99
Hand debug only. No software for it has been found or tested.
3.20 SDS-940
Hand debug only, and a few diagnostics.
3.21 LGP-30
Unfinished; hand debug only. Does not run available software, probably
due to my misunderstanding of the LGP-30 operational procedures.
3.22 Altair (original 8080 version)
Stable and working, but not really supported. Runs available software.
3.23 AltairZ80 (Z80 version)
Stable and working; runs available software. Supported and edited by
Peter Schorn.
3.24 SWTP 6800
Stable and working; runs available software. Supported and edited by
Bill Beech
3.25 Sigma 32b
Incomplete; more work is needed on the peripherals for accuracy.
Included in the beta simulators package.
3.26 Alpha
Incomplete; essentially just an EV-5 (21164) chip emulator. Included
in the beta simulators package.
3.27 SAGE
Incomplete. Included in the beta simulators package.
3.28 SC1
Internal simulator for SiCortex supercomputer; intended as an example
of implementing an SMP system in the current SimH structure. Included
in the beta simulators package.
- Suggestions for Future Work
4.1 General Structure
- Multi-threading, to allow true concurrency between SCP and the simulator
- Graphics device support, particularly for the PDP-1 and PDP-11
4.2 Current Simulators
- PDP-1 graphics, to run Space War
- PDP-11 GT40 graphics, to run Lunar Lander
- PDP-15 MUMPS-15
- Interdata native OS debug, both 16b and 32b
- SDS 940 timesharing operating system debug
- IBM 7094 CTSS feature debug and operating system debug
- IBM 1620 debug and software
- GRI-909 software
- Sigma 32b completion and debug
- LGP-30 debug
4.3 Possible Future Simulators
- Data General MV8000 (if a hobbyist license can be obtained for AOS)
- Alpha simulator
- HP 3000 (16b) simulator with MPE
simh v3.8-2-rc2
This is a pre-release of v3.9-0
simh v3.8-2-rc1
Pre-release of v3.9-0
simh v3.8-1
Author: Bob Supnik bob@supnik.org
Date: Sun Feb 8 09:06:00 2009 -0800
Notes For V3.8
The makefile now works for Linux and most Unix's. Howevr, for Solaris
and MacOS, you must first export the OSTYPE environment variable:
> export OSTYPE
> make
Otherwise, you will get build errors.
1. New Features
1.1 3.8-0
1.1.1 SCP and Libraries
- BREAK, NOBREAK, and SHOW BREAK with no argument will set, clear, and
show (respectively) a breakpoint at the current PC.
1.1.2 GRI
- Added support for the GRI-99 processor.
1.1.3 HP2100
- Added support for the BACI terminal interface.
- Added support for RTE OS/VMA/EMA, SIGNAL, VIS firmware extensions.
1.1.4 Nova
- Added support for 64KW memory (implemented in third-party CPU's).
1.1.5 PDP-11
- Added support for DC11, RC11, KE11A, KG11A.
- Added modem control support for DL11.
- Added ASCII character support for all 8b devices.
1.2 3.8-1
1.2.1 SCP and libraries
- Added capability to set line connection order for terminal multiplexers.
1.2.2 HP2100
- Added support for 12620A/12936A privileged interrupt fence.
- Added support for 12792C eight-channel asynchronous multiplexer.
2. Bugs Fixed
Please see the revision history on http://simh.trailing-edge.com or
in the source module sim_rev.h.
simh v3.8-0
Author: Bob Supnik bob@supnik.org
Date: Tue Jun 24 14:21:00 2008 -0700
Notes For V3.8
The makefile now works for Linux and most Unix's. Howevr, for Solaris
and MacOS, you must first export the OSTYPE environment variable:
> export OSTYPE
> make
Otherwise, you will get build errors.
1. New Features
1.1 3.8-0
1.1.1 SCP and Libraries
- BREAK, NOBREAK, and SHOW BREAK with no argument will set, clear, and
show (respectively) a breakpoint at the current PC.
1.2 GRI
- Added support for the GRI-99 processor.
1.3 HP2100
- Added support for the BACI terminal interface.
- Added support for RTE OS/VMA/EMA, SIGNAL, VIS firmware extensions.
1.4 Nova
- Added support for 64KW memory (implemented in third-party CPU's).
1.5 PDP-11
- Added support for DC11, RC11, KE11A, KG11A.
- Added modem control support for DL11.
- Added ASCII character support for all 8b devices.
2. Bugs Fixed
Please see the revision history on http://simh.trailing-edge.com or
in the source module sim_rev.h.
simh v3.7-3
Author: Bob Supnik bob@supnik.org
Date: Sun Sep 2 05:30:00 2007 -0700
Notes For V3.7
1. New Features
1.1 3.7-0
1.1.1 SCP
- Added SET THROTTLE and SET NOTHROTTLE commands to regulate simulator
execution rate and host resource utilization.
- Added idle support (based on work by Mark Pizzolato).
- Added -e to control error processing in nested DO commands (from
Dave Bryan).
1.1.2 HP2100
- Added Double Integer instructions, 1000-F CPU, and Floating Point
Processor (from Dave Bryan).
- Added 2114 and 2115 CPUs, 12607B and 12578A DMA controllers, and
21xx binary loader protection (from Dave Bryan).
1.1.3 Interdata
- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
state.
1.1.4 PDP-11
- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
state (WAIT instruction executed).
- Added TA11/TU60 cassette support.
1.1.5 PDP-8
- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
state (keyboard poll loop or jump-to-self).
- Added TA8E/TU60 cassette support.
1.1.6 PDP-1
- Added support for 16-channel sequence break system.
- Added support for PDP-1D extended features and timesharing clock.
- Added support for Type 630 data communications subsystem.
1.1.6 PDP-4/7/9/15
- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
state (keyboard poll loop or jump-to-self).
1.1.7 VAX, VAX780
- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
state (more than 200 cycles at IPL's 0, 1, or 3 in kernel mode).
1.1.8 PDP-10
- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
state (operating system dependent).
- Added CD20 (CD11) support.
2. Bugs Fixed
Please see the revision history on http://simh.trailing-edge.com or
in the source module sim_rev.h.
simh v3.7-2
Author: Bob Supnik bob@supnik.org
Date: Thu Jul 12 19:12:00 2007 -0700
Notes For V3.7
1. New Features
1.1 3.7-0
1.1.1 SCP
- Added SET THROTTLE and SET NOTHROTTLE commands to regulate simulator
execution rate and host resource utilization.
- Added idle support (based on work by Mark Pizzolato).
- Added -e to control error processing in nested DO commands (from
Dave Bryan).
1.1.2 HP2100
- Added Double Integer instructions, 1000-F CPU, and Floating Point
Processor (from Dave Bryan).
- Added 2114 and 2115 CPUs, 12607B and 12578A DMA controllers, and
21xx binary loader protection (from Dave Bryan).
1.1.3 Interdata
- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
state.
1.1.4 PDP-11
- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
state (WAIT instruction executed).
- Added TA11/TU60 cassette support.
1.1.5 PDP-8
- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
state (keyboard poll loop or jump-to-self).
- Added TA8E/TU60 cassette support.
1.1.6 PDP-1
- Added support for 16-channel sequence break system.
- Added support for PDP-1D extended features and timesharing clock.
- Added support for Type 630 data communications subsystem.
1.1.6 PDP-4/7/9/15
- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
state (keyboard poll loop or jump-to-self).
1.1.7 VAX, VAX780
- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
state (more than 200 cycles at IPL's 0, 1, or 3 in kernel mode).
1.1.8 PDP-10
- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
state (operating system dependent).
- Added CD20 (CD11) support.
2. Bugs Fixed
Please see the revision history on http://simh.trailing-edge.com or
in the source module sim_rev.h.
simh v3.7-1
Author: Bob Supnik bob@supnik.org
Date: Sat May 12 17:39:00 2007 -0700
Notes For V3.7
1. New Features
1.1 3.7-0
1.1.1 SCP
- Added SET THROTTLE and SET NOTHROTTLE commands to regulate simulator
execution rate and host resource utilization.
- Added idle support (based on work by Mark Pizzolato).
- Added -e to control error processing in nested DO commands (from
Dave Bryan).
1.1.2 HP2100
- Added Double Integer instructions, 1000-F CPU, and Floating Point
Processor (from Dave Bryan).
- Added 2114 and 2115 CPUs, 12607B and 12578A DMA controllers, and
21xx binary loader protection (from Dave Bryan).
1.1.3 Interdata
- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
state.
1.1.4 PDP-11
- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
state (WAIT instruction executed).
- Added TA11/TU60 cassette support.
1.1.5 PDP-8
- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
state (keyboard poll loop or jump-to-self).
- Added TA8E/TU60 cassette support.
1.1.6 PDP-1
- Added support for 16-channel sequence break system.
- Added support for PDP-1D extended features and timesharing clock.
- Added support for Type 630 data communications subsystem.
1.1.6 PDP-4/7/9/15
- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
state (keyboard poll loop or jump-to-self).
1.1.7 VAX, VAX780
- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
state (more than 200 cycles at IPL's 0, 1, or 3 in kernel mode).
1.1.8 PDP-10
- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
state (operating system dependent).
- Added CD20 (CD11) support.
2. Bugs Fixed
Please see the revision history on http://simh.trailing-edge.com or
in the source module sim_rev.h.
sim v3.7-0
Author: Bob Supnik bob@supnik.org
Date: Sat Feb 3 14:59:00 2007 -0800
Notes For V3.7-0
1. New Features
1.1 3.7-0
1.1.1 SCP
- Added SET THROTTLE and SET NOTHROTTLE commands to regulate simulator
execution rate and host resource utilization.
- Added idle support (based on work by Mark Pizzolato).
- Added -e to control error processing in nested DO commands (from
Dave Bryan).
1.1.2 HP2100
- Added Double Integer instructions, 1000-F CPU, and Floating Point
Processor (from Dave Bryan).
- Added 2114 and 2115 CPUs, 12607B and 12578A DMA controllers, and
21xx binary loader protection (from Dave Bryan).
1.1.3 Interdata
- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
state.
1.1.4 PDP-11
- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
state (WAIT instruction executed).
- Added TA11/TU60 cassette support.
1.1.5 PDP-8
- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
state (keyboard poll loop or jump-to-self).
- Added TA8E/TU60 cassette support.
1.1.6 PDP-1
- Added support for 16-channel sequence break system.
- Added support for PDP-1D extended features and timesharing clock.
- Added support for Type 630 data communications subsystem.
1.1.6 PDP-4/7/9/15
- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
state (keyboard poll loop or jump-to-self).
1.1.7 VAX, VAX780
- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
state (more than 200 cycles at IPL's 0, 1, or 3 in kernel mode).
1.1.8 PDP-10
- Added SET IDLE and SET NOIDLE commands to idle the simulator in wait
state (operating system dependent).
- Added CD20 (CD11) support.
2. Bugs Fixed
Please see the revision history on http://simh.trailing-edge.com or
in the source module sim_rev.h.