This code example demonstrates connecting to AWS IoT over MQTT using the AnyCloud SDK for PSoC 6 MCU and CYW43xxx connectivity devices.

This code example demonstrates the implementation of the Bluetooth® LE vendor-specific device using AIROC™ CYW20829, PSoC™ 6, Wi-Fi & Bluetooth® combo chips and ModusToolbox™ software environment.

This example demonstrates the UART (HAL) transmit and receive operation in PSoC 6 MCU.

This example demonstrates building a bootlaoder application for PSoC 6 using MCUboot, an open source secure bootloader for 32-bit MCUs. This bootloader app runs on CM0+.

This code example demonstrates Wi-Fi provisioning via SoftAP and setting up a web server with PSoC 6 MCU and CYW43xxx connectivity devices.

This code example demonstrates the implementation of a simple BLE Environmental Sensing Profile.

This code example demonstrates the implementation of a simple BLE GAP Central - GATT Server with Current Time Service using the Cypress Combo (Wi-Fi+BT) SoCs.

This code example encrypts and decrypts user input data using the AES algorithm using a 128-bit key. The encrypted and decrypted data are displayed on a UART terminal emulator.

This code example demonstrates the implementation of a simple Bluetooth LE Battery Service. The Battery Service exposes the Battery Level of the device and comes with support for OTA update over Bluetooth LE.

This example demonstrates how to use QSPI in execute-in-place (XIP) mode with external flash memory on the PSoC 6 MCU using ModusToolbox IDE.

Deprecated. Use https://github.com/Infineon/mtb-example-usb-device-hid-generic. This example demonstrates how to configure the USB block in a PSoC 6 MCU as a Human Interface Device (HID). The device enumerates as a Generic HID device.

mtb-example-usb-device-cdc-echo

This example demonstrates use of the ADC (Analog to Digital Converter) HAL driver to perform voltage measurements.

This example demonstrates the UART transmit and receive operation using DMA in PSoC 6 MCU.

Deprecated. Use https://github.com/Infineon/mtb-example-usb-device-hid-mouse. This example demonstrates how to configure the USB block in a PSoC 6 MCU as a Human Interface Device (HID). The device enumerates as a 3-button mouse.

This code example demonstrates the low-power operation of PSoC 6 MCU and CYW43xxx connectivity devices using the AnyCloud Low Power Assistant (LPA) middleware library.

This code example demonstrates how to create a CAPSENSE™ design using CM0 of PSoC™ 6 MCU, without utilizing CM4. This code example features CAPSENSE™ buttons, button 0 turns the LED ON and button 1 turns the LED OFF. This project uses the CAPSENSE™ Middleware Library.

This is a minimal starter dual-CPU security application template for PSoC™ 62/63 MCU devices. This code example is meant to be a companion to the AN221111 – PSoC™ 6 MCU: Designing a secured system application note. It demonstrates the following features to create a secured system as explained in the application note.

This example demonstrates how to use the inter-processor communication (IPC) driver to implement a semaphore in PSoC 6 MCU. The semaphore is used to lock to control access to a resource shared by the CPUs and synchronize the initialization instructions.

This code example shows how to implement a littlefs file system for PSoC 6 devices using the mtb-littlefs MW library. The CE supports working with both SD card and QSPI NOR flash devices.