This repository provides a bare-metal code example for using TMR2 as 10kHz clock for SPI, configured as host with 2 clients (RC6 pin ->SS1 and RC7 pin ->SS2).
-
Updated
Jun 15, 2022 - C
This repository provides a bare-metal code example for using TMR2 as 10kHz clock for SPI, configured as host with 2 clients (RC6 pin ->SS1 and RC7 pin ->SS2).
MCC generated code for i2c write operation
MCC generated code for i2c read and write operations with interrupts.
This repository provides a bare-metal code example for using TMR0 in 8-bit Mode with clock output. A signal will be generated using TMR0 on the output RC2 pin.
This repository provides a MCC-generated code example for using TMR0 in 8-bit Mode with clock output. A signal will be generated using TMR0 on the output RC2 pin.
PIC18F47Q10 PWM RGB-LED Using Interrupts - bare metal code example
The PIC18F47Q10 provides multiple PORT modules. In this demo, a PORT pin is configured as input and connected to a button. The Interrupt-on-Change is enabled on the negative edge. Another pin is used as an output and connected to an LED.
This repository provides a bare-metal code example for using TMR2 peripheral to trigger the ADCC to make conversions at a fixed frequency rate, that can be adjusted with the period of TMR2.
This repository provides a MCC generated code example that uses the TMR2 as 10kHz clock for SPI, configured as host with 2 clients (RC6 pin ->SS1 and RC7 pin ->SS2).
This repository provides a MCC generated code example that uses TMR4 peripheral in One-Shot to stop TMR2 if an external pin is pulled to GND for more than a desired period.
This repository provides a bare-metal code example for using TMR4 peripheral in One-Shot to stop TMR2 if an external pin is pulled to GND for more than a desired period.
This repository provides a bare-metal code example for using TMR4 peripheral as a Hardware Limit Timer in order to generate an interrupt and stop TMR2 that also stops the ADCC auto-conversion.
Getting Started with Timers/Counters on PIC18. The TMR1 is configured as a counter.
This repository provides a MCC generated code example that uses TMR4 peripheral as a Hardware Limit Timer in order to generate an interrupt and stop TMR2 that also stops the ADCC auto-conversion.
Getting Started with Timers/Counters on PIC18. The TMR1 is configured as a counter.
Getting Started with Timers/Counters on PIC18. The TMR1 is configured in gate single pulse mode.
Getting Started with Timers/Counters on PIC18. The TMR1 is configured in gate single pulse and toggle combined mode.
Getting Started with Timers/Counters on PIC18. The TMR1 is configured in gate single pulse and toggle combined mode.
Getting Started with Timers/Counters on PIC18. The TMR1 is configured in gate single pulse mode.
Code example for "Getting Started with CLC on PIC18" Technical Brief : Using the CLC to create a LED Dimming Effect - MCC Generated Code
Add a description, image, and links to the pic18f47q10 topic page so that developers can more easily learn about it.
To associate your repository with the pic18f47q10 topic, visit your repo's landing page and select "manage topics."