This repository provides a bare-metal code example for using TMR4 peripheral as a Hardware Limit Timer in order to generate an interrupt and stop TMR2 that also stops the ADCC auto-conversion.

This repository provides a MCC generated code example that uses TMR4 peripheral as a Hardware Limit Timer in order to generate an interrupt and stop TMR2 that also stops the ADCC auto-conversion.

This repository provides a bare-metal code example for using TMR2 peripheral to trigger the ADCC to make conversions at a fixed frequency rate, that can be adjusted with the period of TMR2.

The PIC18F47Q10 provides multiple PORT modules. In this demo, a PORT pin is configured as input and connected to a button. The Interrupt-on-Change is enabled on the negative edge. Another pin is used as an output and connected to an LED.

This repository provides a MCC generated code example that uses TMR4 peripheral in One-Shot to stop TMR2 if an external pin is pulled to GND for more than a desired period.

This repository provides a bare-metal code example for using TMR4 peripheral in One-Shot to stop TMR2 if an external pin is pulled to GND for more than a desired period.

This repository provides a bare-metal code example for using TMR2 as 10kHz clock for SPI, configured as host with 2 clients (RC6 pin ->SS1 and RC7 pin ->SS2).

This repository provides a MCC generated code example that uses the TMR2 as 10kHz clock for SPI, configured as host with 2 clients (RC6 pin ->SS1 and RC7 pin ->SS2).