Skip to content

A package for animating ragdolls through keyframed animations.

License

Notifications You must be signed in to change notification settings

hairibar/Hairibar.Ragdoll

Repository files navigation

Hairibar.Ragdoll

A Unity package for making ragdolls and animating them with keyframed animations. See it in action at https://youtu.be/ByNPbbACf40.

  • Allows keyframed animations to be affected by physics.
  • Animator-friendly parameters.
  • Partial ragdolls: enable simulation on some bones and leave others purely keyframed.
  • Transparent: acts as a post-processing effect on your animation. Your game code doesn't even need to know about it.
  • Compatible with virtually any animation system.

Table of Contents

Overview

Hairibar.Ragdoll works by keeping two versions of the character's bone hierarchy. The Target, which is animated by Unity and has a mesh, and the Ragdoll, which has no visual representation.

Every physics step, appropriate forces are applied to the Ragdoll so that it follows the Target animation (this is referred to as Animation Matching). Every frame, just before rendering, the Target bones are moved to the pose of the Ragdoll bones, effectively rendering the Ragdoll.

This approach makes it easy to add ragdoll effects, as no changes to the existing hierarchy are needed. The ragdoll effect works like a post-processing effect applied to the animation.

Animation Matching

Position and Rotation Matching

The Target position and rotation are matched separately. Position and rotation matching can be configured/enabled/disabled independently. Position is matched in world-space, while rotation is matched in the local space of each bone.

Matching position in world space makes Ragdoll bones easily line up with the Target bones.

Matching rotation in local space allows the Ragdoll to attempt to match the Target pose, but allows this pose to be deformed by forces, collisions etc.

An example of a character with only Rotation Matching vs one with both. Left: a character with Position and Rotation Matching. Right: a character with only Rotation Matching.

In most cases, you'll be using both matching types at the same time.

Parameters

Animation Matching forces are calculated via springs, but the usual k and d parameters are replaced with easier alternatives:

Alpha

A value from 0 to 1. A Ragdoll bone with alpha=1 will take one physics step to reach the Target pose. With alpha=0.5, it will take two steps, etc.

Alpha controls the stiffness of the springs, and can be thought of as a blend between animation and physics.

  • Alpha=0: physics.
  • Alpha=1: animation.

It's worth noting that alpha is most expressive at its low end. 0.01 and 0.1 look very different, but 0.1 and 1 look almost identical. To prevent stability problems, if you can't see the difference between two values, favour the lowest one.

Damping ratio

A value from 0 to 1. Describes the damping behaviour of the spring.

  • Ratio of 0: no damping.
  • Ratio of 1: the exact amount of damping so that no oscillations happen.
  • Ratio between 0 and 1: progressively less oscillations.

The damping ratio can be thought of as a wobble control. This can be very useful for achieving secondary motion without having to animate it.

How to make an animated ragdoll

A wizard is included to guide you in the process of making a ragdoll. This wizard can be found at the menu bar: Tools/Hairibar.Ragdoll/Animated Ragdoll Wizard.

Select your current character GameObject (this will typically be where your Animator component is) and open the wizard to start the process.

Here are the steps that the wizard will take you through:

Hierarchy copy

A copy of your character will be created. The existing version will be the Target (nothing will changed in it). The new version, which will have all components removed, will be the Ragdoll.

Add colliders

All 3D collider types are supported. A bone can have any number of colliders, including zero.

As a general rule, tend to make colliders bigger than the visual body part. Don't worry about overlapping some colliders (this always happens around the chest area); you'll get a chance to selectively ignore collisions later.

You can create a child and put the collider there if you need the local offset. This can be useful if you need a collider to be rotated relative to the bone it represents.

Add ConfigurableJoints

In this step, a ConfigurableJoint must be added to each bone that you want to simulate.

Omitting bones

Not all bones need to be simulated. For example, you should probably give the hands a ConfigurableJoint and skip the fingers. The fingers will still play their local-space animation; they will simply not be simulated and will move with the hand.

There is a single rule in terms of omitting bones: if a bone is omitted, all of its children must be omitted as well. In other words, to simulate a bone, all of its parents (up to the root bone) must be simulated as well.

Configuring ConfigurableJoints

This part is not pretty. ConfigurableJoints are powerful, but poorly documented. If you don't understand a parameter, this thread has the best writeup I know of.

Here are the things you need to configure for each bone:

  • Assign the connectedBody (for a given bone, this will be their parent). The root bone's connectedBody should be null.
  • Set the anchor. Unless you're doing something very specific, you can just set autoConfigureAnchor to true.
  • Set the axes. This is the hard part. Read the thread, have patience and maybe set up a test case with two bodies so that you can do some experiments. Also, try using the samples as reference.
  • Set the motion limit types. In most cases (including human characters), all joints (except the root) should have their motion axes locked and their angular motion axes limited; though this is not a requirement. The root joint should have all 6 axes set to Free (this is a requirement).
  • Set the angular limits (and motion limits if you're not locking them).

Don't bother changing any other parameters! (This includes the Rigidbody). Many of them will be overwritten at runtime/controlled by RagdollSettings and RagdollAnimator. Also, breaking joints is not supported.

Profile creation

A default set of Ragdoll Profiles will optionally be created for this ragdoll. If this ragdoll will share an existing definition, assign the definition instead.

At this point, several components will have been added to the Target and the Ragdoll, and everything will be set up. Read more about these components here.

RagdollDefinitions and Ragdoll Profiles

Hairibar.Ragdoll uses a bunch of ScriptableObjects (referred to as Ragdoll Profiles) to manage configuration in a reusable and swappable way. To refer to specific bones, these profiles use RagdollDefinitions.

A RagdollDefinition keeps a list of the bones present in a ragdoll. An example of a RagdollDefinition for a human character."

Any ragdolls that have this same list of bones can share this RagdollDefinition, and thus share any Ragdoll Profiles.

Components of interest

RagdollDefinitionBindings

Placed on the Ragdoll, RagdollDefinitionBindings binds a ConfigurableJoint to each bone name in the definition.

This bridges the gap from the bone names found in Ragdoll Profiles to actual GameObject references.

This component is always required.

An example of a RagdollDefinitionBindings

RagdollSettings

Placed on the Ragdoll. Provides a centralised place to configure the Rigidbodies and ConfigurableJoints. Most settings have tooltips explaining what they do (the rest are hopefully self-evident).

When changing any fields from code, RagdollSettings.ApplySettings() must be called.

There are properties for two Ragdoll Profiles.

RagdollPowerProfile

RagdollPowerProfiles allow individual bones to be configured as simulated/not simulated.

Each bone can be in one of three states:

  • Kinematic: the bone is not simulated, it follows the Target animation perfectly. Its Rigidbody will be made kinematic.
  • Powered: the bone is simulated, and Animation Matching forces are applied to it.
  • Unpowered: the bone is simulated, but no Animation Matching forces are applied.

An example RagdollPowerProfile for a character with an injured arm.

RagdollWeightDistribution

Weight distribution can greatly affect how unpowered ragdolls behave.

The total mass of the ragdoll will be the value of RagdollSettings.totalMass. RagdollWeightDistributions allow you to control how this mass is distributed between the Ragdoll bones.

An example of a RagdollWeightDistribution

Generally speaking, making bones around the center of mass heavier than the extremities is a good starting point.

RagdollAnimator

Placed on the Target. It will generally be alongside an Animator, but it doesn't have to be. Remember, any animation system that positions the bones before RagdollAnimator.LateUpdate() every frame will be compatible.

RagdollAnimator is the key component of Hairibar.Ragdoll, as it is in charge of Animation Matching.

It has two master values for alpha and the damping ratio, which are handy for quick experiments. For actual production use, RagdollAnimationProfiles should be assigned.

When switching between RagdollAnimationProfiles, their values will be transitioned between.

RagdollAnimationProfiles

These objects define values for alpha and damping ratio. Position and rotation matching are configured separately. There are global values for both.

By default, RagdollAnimationProfiles aren't definition-specific, as they don't refer to specific bones. A RagdollDefinition can be assigned, which allows the global values to be overridden by bone-specific values.

An example of a RagdollAnimationProfile

There's a checkbox for matching root rotation. Rotation is matched in local space, but, as the root's local space is the same as world space, it's a somewhat special case.

Matching root rotation makes it so that the ragdoll keeps the general orientation of the target. Not matching it allows it to deviate from this orientation. Different gameplay scenarios and setups may need one behaviour or the other.

RagdollCollisionIgnorer

Sometimes, collisions can be problematic. An animation might require to put a hand inside a pocket—but collisions might not allow this to happen.

RagdollCollisionIgnorer is an optional component that is placed on the Ragdoll. It applies the ignorance settings defined in RagdollCollisionProfiles.

RagdollCollisionProfiles

These profiles allow you to ignore collisions in two different ways.

  1. You can ignore collisions between two specific bones. (In our example, we would ignore collisions between R_Hand and R_LegUp).
  2. You can outright disable all collisions for a given bone. Note that this is implemented through Rigidbody.detectCollisions. The Colliders themselves will not be disabled, which is subtly different.

An example of a RagdollCollisionProfile

RagdollCollisionReaction

When there's a collider between the Ragdoll and the Target position matching might cause the Ragdoll to vibrate. RagdollCollisionReaction prevents this by temporarily lowering the colliding bones' alpha.

RagdollCollisionReaction is an optional component that is placed on the Target.

RagdollPowerOnTransitioner

When instantiating a character, it will often snap to a pose. This can also happen when switching Power Profiles.

If these sudden movements causes issues, add a RagdollPowerOnTransitioner to the Target.

This component will gradually turn alpha up, preventing sudden movements from making the ragdoll unstable.

RagdollColliderVisualizer

Placed on the Ragdoll, this component draws the ragdoll's colliders as opaque meshes. The colours match their power profile.

Mecanim integration

While Hairibar.Ragdoll can work with systems other than Mecanim, it offers multiple StateMachineBehaviours that can come in handy: SetRagdollAnimationProfileOnEnter, SetRagdollCollisionProfileOnEnter, SetRagdollPowerProfileOnEnter and SetRagdollWeightDistributionOnEnter.

These behaviours allow you to tie specific Ragdoll Profiles to specific animation states, automatically switching between them.

API

Hairibar.Ragdoll is divided in two modules: Core and Animation. Core implements the framework for working with ragdolls (RagdollDefinitions, RagdollSettings, etc). Animation builds upon this framework and implements the animation stuff.

Each module has their runtime assembly and their editor assembly.

IBoneProfileModifier

This interface can be implemented to modify animation parameters at runtime. Just implement it in a component and put that component next to the RagdollAnimator.

You can take RagdollCollisionReaction as an example.

ITargetPoseModifier

This interface can be implemented to modify the target pose that has been read from the animation system. Just implement it in a component and put that component next to the RagdollAnimator.

Custom Ragdoll Profiles

There may be situations where you want your own reusable sets of parameters (for example, for configuring an IBoneProfileModifier).

Custom Ragdoll Profiles can easily be made by inheriting from RagdollProfile. This base class provides RagdollDefinition compatibility checks.

You can make a custom inspector by inheriting from RagdollProfileEditor, which makes it easy to add drag & drop support, for example.

RagdollPowerProfile and RagdollPowerProfileEditor are good straight forward examples.

Samples

Hairibar.Ragdoll includes a set of demo scenes that you can use as examples to understand how to work with the package.

See Importing the samples for instructions on how to get these samples.

The samples require specific ProjectSettings to be in place in order to work. After you install the samples, press Tools/Hairibar.Ragdoll/Perform Demo Layer Setup to configure these settings automatically.

WARNING: Tools/Hairibar.Ragdoll/Perform Demo Layer Setup will overwrite your current TagManager and DynamicsManager values. You will lose you layers, tags and physics settings. Either import the samples in a new project, or make a backup of your settings before importing.

General tips

  • Keep ragdolls in their own layer. This allows you to be selective as to what they collide with. You probably don't want ragdolls and navigation capsules interacting.
  • Make test scenes! There's a lot of parameters to be tweaked in RagdollSettings. Set up specific situations, and tweak until you get the behaviour you want.
  • If you see weird poses and are sure you ConfigurableJoints are correctly set up, collisions between body parts may be the culprit. Add a CollisionSpammer to every bone and they will log any collisions, allowing you to find and selectively ignore them.
  • If your ragdoll irrecoverably blows up after large shocks, make sure that you're not using hard limits on your joint. Set RagdollSettings.limitSpring to anything over 0 to use soft joint limits instead. With soft joint limits, limits are enforced by a spring instead of being completely inelastic. This can make a huge difference on stability.

How to install

Add the following dependencies to your manifest.json:

{
  "dependencies": {
    ...
    "com.dbrizov.naughtyattributes": "https://github.com/dbrizov/NaughtyAttributes.git#v2.0.7",
    "com.hairibar.naughtyextensions": "https://github.com/hairibar/Hairibar.NaughtyExtensions.git#v1.3.0",
    "com.hairibar.engineextensions": "https://github.com/hairibar/Hairibar.EngineExtensions.git#v2.3.0",
    "com.hairibar.ragdoll": "https://github.com/hairibar/Hairibar.Ragdoll.git#upm"
    ...
  }
}

This snippet will import Hairibar.Ragdoll and its dependencies to your project. For this to work, Git must be added to your system PATH (which is probably already the case).

Dependencies

This package has three dependencies:

Importing the samples

After importing Hairibar.Ragdoll, find it in the package manager. There will be an "Import into project" button in the "Samples" section.

Make sure to read the instructions in Samples.

License

The package is released under the MIT license. If you find it useful in a project, crediting me (Aitor Iribar) or the use of the package is appreciated! This is not legally required, mind you, partly because I don't trust myself to write a license of my own.

Also, ping me if you do use it! I'd love to know.