Bluetooth: btqca: sequential validation

This change will have sequential validation support
& patch config command is added

Signed-off-by: Sai Teja Aluvala <quic_saluvala@quicinc.com>

drivers/bluetooth/btqca.c

@@ -141,6 +141,49 @@ static int qca_read_fw_build_info(struct hci_dev *hdev)
 	return err;
 }
 
+int qca_send_patch_config_cmd(struct hci_dev *hdev, enum qca_btsoc_type soc_type)
+{
+	struct sk_buff *skb;
+	int err = 0;
+	u8 cmd[5] = {EDL_PATCH_CONFIG_CMD, 0x01, 0, 0, 0};
+	u8 rlen = 0x02;
+	struct edl_event_hdr *edl;
+	u8 rtype = EDL_PATCH_CONFIG_CMD;
+
+	bt_dev_dbg(hdev, "QCA Patch config");
+
+	skb = __hci_cmd_sync_ev(hdev, EDL_PATCH_CMD_OPCODE, EDL_PATCH_CONFIG_CMD_LEN,
+			cmd, HCI_EV_VENDOR, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		err = PTR_ERR(skb);
+		bt_dev_err(hdev, "Sending QCA Patch config failed (%d)", err);
+		return err;
+	}
+	if (skb->len != rlen) {
+		bt_dev_err(hdev, "QCA Patch config cmd size mismatch len %d", skb->len);
+		err = -EILSEQ;
+		goto out;
+	}
+	edl = (struct edl_event_hdr *)(skb->data);
+	if (!edl) {
+		bt_dev_err(hdev, "QCA Patch config with no header");
+		err = -EILSEQ;
+		goto out;
+	}
+	if (edl->cresp != EDL_PATCH_CONFIG_RES_EVT || edl->rtype != rtype) {
+		bt_dev_err(hdev, "QCA Wrong packet received %d %d", edl->cresp,
+		 edl->rtype);
+		err = -EIO;
+		goto out;
+	}
+out:
+	kfree(skb);
+	if (err)
+		bt_dev_err(hdev, "QCA Patch config cmd failed (%d)", err);
+
+	return err;
+}
+
 static int qca_send_reset(struct hci_dev *hdev)
 {
 	struct sk_buff *skb;
@@ -551,6 +594,8 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
 	 */
 	rom_ver = ((soc_ver & 0x00000f00) >> 0x04) | (soc_ver & 0x0000000f);
 
+	if (soc_type == QCA_WCN6750)
+		qca_send_patch_config_cmd(hdev, soc_type);
 	/* Download rampatch file */
 	config.type = TLV_TYPE_PATCH;
 	if (qca_is_wcn399x(soc_type)) {

drivers/bluetooth/btqca.h

@@ -13,6 +13,8 @@
 #define EDL_PATCH_TLV_REQ_CMD		(0x1E)
 #define EDL_GET_BUILD_INFO_CMD		(0x20)
 #define EDL_NVM_ACCESS_SET_REQ_CMD	(0x01)
+#define EDL_PATCH_CONFIG_CMD_LEN	(0x05)
+#define EDL_PATCH_CONFIG_CMD		(0x28)
 #define MAX_SIZE_PER_TLV_SEGMENT	(243)
 #define QCA_PRE_SHUTDOWN_CMD		(0xFC08)
 #define QCA_DISABLE_LOGGING		(0xFC17)
@@ -24,6 +26,7 @@
 #define EDL_CMD_EXE_STATUS_EVT		(0x00)
 #define EDL_SET_BAUDRATE_RSP_EVT	(0x92)
 #define EDL_NVM_ACCESS_CODE_EVT		(0x0B)
+#define EDL_PATCH_CONFIG_RES_EVT	(0x00)
 #define QCA_DISABLE_LOGGING_SUB_OP	(0x14)
 
 #define EDL_TAG_ID_HCI			(17)