Merge tag 'mips_5.17' of git://git.kernel.org/pub/scm/linux/kernel/gi…

…t/mips/linux

Pull MIPS updates from Thomas Bogendoerfer:

 - add support for more BCM47XX based devices

 - add MIPS support for brcmstb PCIe controller

 - add Loongson 2K1000 reset driver

 - remove board support for rbtx4938/rbtx4939

 - remove support for TX4939 SoCs

 - fixes and cleanups

* tag 'mips_5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (59 commits)
  MIPS: ath79: drop _machine_restart again
  PCI: brcmstb: Augment driver for MIPs SOCs
  MIPS: bmips: Remove obsolete DMA mapping support
  MIPS: bmips: Add support PCIe controller device nodes
  dt-bindings: PCI: Add compatible string for Brcmstb 74[23]5 MIPs SOCs
  MIPS: compressed: Fix build with ZSTD compression
  MIPS: BCM47XX: Add support for Netgear WN2500RP v1 & v2
  MIPS: BCM47XX: Add support for Netgear R6300 v1
  MIPS: BCM47XX: Add LEDs and buttons for Asus RTN-10U
  MIPS: BCM47XX: Add board entry for Linksys WRT320N v1
  MIPS: BCM47XX: Define Linksys WRT310N V2 buttons
  MIPS: Remove duplicated include in local.h
  MIPS: retire "asm/llsc.h"
  MIPS: rework local_t operation on MIPS64
  MIPS: fix local_{add,sub}_return on MIPS64
  mips/pci: remove redundant ret variable
  MIPS: Loongson64: Add missing of_node_put() in ls2k_reset_init()
  MIPS: new Kconfig option ZBOOT_LOAD_ADDRESS
  MIPS: enable both vmlinux.gz.itb and vmlinuz for generic
  MIPS: signal: Return immediately if call fails
  ...

Documentation/devicetree/bindings/mips/loongson/ls2k-reset.yaml

@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/mips/loongson/ls2k-reset.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Loongson 2K1000 PM Controller
+
+maintainers:
+  - Qing Zhang <zhangqing@loongson.cn>
+
+description: |
+  This controller can be found in Loongson-2K1000 Soc systems.
+
+properties:
+  compatible:
+    const: loongson,ls2k-pm
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        pm: reset-controller@1fe07000 {
+            compatible = "loongson,ls2k-pm";
+            reg = <0 0x1fe07000 0 0x422>;
+        };
+    };
+...

Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml

@@ -19,6 +19,8 @@ properties:
           - brcm,bcm7278-pcie # Broadcom 7278 Arm
           - brcm,bcm7216-pcie # Broadcom 7216 Arm
           - brcm,bcm7445-pcie # Broadcom 7445 Arm
+          - brcm,bcm7425-pcie # Broadcom 7425 MIPs
+          - brcm,bcm7435-pcie # Broadcom 7435 MIPs
 
   reg:
     maxItems: 1

arch/mips/Kconfig

@@ -264,7 +264,6 @@ config BMIPS_GENERIC
 	bool "Broadcom Generic BMIPS kernel"
 	select ARCH_HAS_RESET_CONTROLLER
 	select ARCH_HAS_SYNC_DMA_FOR_CPU_ALL
-	select ARCH_HAS_PHYS_TO_DMA
 	select BOOT_RAW
 	select NO_EXCEPT_FILL
 	select USE_OF
@@ -640,9 +639,6 @@ config MACH_REALTEK_RTL
 	select SYS_SUPPORTS_MIPS16
 	select SYS_SUPPORTS_MULTITHREADING
 	select SYS_SUPPORTS_VPE_LOADER
-	select SYS_HAS_EARLY_PRINTK
-	select SYS_HAS_EARLY_PRINTK_8250
-	select USE_GENERIC_EARLY_PRINTK_8250
 	select BOOT_RAW
 	select PINCTRL
 	select USE_OF
@@ -765,7 +761,6 @@ config SGI_IP30
 	select HAVE_PCI
 	select IRQ_MIPS_CPU
 	select IRQ_DOMAIN_HIERARCHY
-	select NR_CPUS_DEFAULT_2
 	select PCI_DRIVERS_GENERIC
 	select PCI_XTALK_BRIDGE
 	select SYS_HAS_EARLY_PRINTK
@@ -1611,7 +1606,6 @@ config CPU_R4300
 	depends on SYS_HAS_CPU_R4300
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
-	select CPU_HAS_LOAD_STORE_LR
 	help
 	  MIPS Technologies R4300-series processors.
 
@@ -1907,6 +1901,10 @@ config SYS_HAS_CPU_MIPS64_R1
 config SYS_HAS_CPU_MIPS64_R2
 	bool
 
+config SYS_HAS_CPU_MIPS64_R5
+	bool
+	select ARCH_HAS_SYNC_DMA_FOR_CPU if DMA_NONCOHERENT
+
 config SYS_HAS_CPU_MIPS64_R6
 	bool
 	select ARCH_HAS_SYNC_DMA_FOR_CPU if DMA_NONCOHERENT
@@ -2065,7 +2063,7 @@ config CPU_SUPPORTS_ADDRWINCFG
 	bool
 config CPU_SUPPORTS_HUGEPAGES
 	bool
-	depends on !(32BIT && (ARCH_PHYS_ADDR_T_64BIT || EVA))
+	depends on !(32BIT && (PHYS_ADDR_T_64BIT || EVA))
 config MIPS_PGD_C0_CONTEXT
 	bool
 	depends on 64BIT
@@ -2116,6 +2114,16 @@ config MIPS_VA_BITS_48
 
 	  If unsure, say N.
 
+config ZBOOT_LOAD_ADDRESS
+	hex "Compressed kernel load address"
+	default 0xffffffff80400000 if BCM47XX
+	default 0x0
+	depends on SYS_SUPPORTS_ZBOOT
+	help
+	  The address to load compressed kernel, aka vmlinuz.
+
+	  This is only used if non-zero.
+
 choice
 	prompt "Kernel page size"
 	default PAGE_SIZE_4KB

arch/mips/Makefile

@@ -253,9 +253,7 @@ endif
 #
 # Board-dependent options and extra files
 #
-ifdef need-compiler
 include $(srctree)/arch/mips/Kbuild.platforms
-endif
 
 ifdef CONFIG_PHYSICAL_START
 load-y					= $(CONFIG_PHYSICAL_START)

arch/mips/alchemy/common/gpiolib.c

@@ -23,8 +23,6 @@
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  *
  *  Notes :
- *	This file must ONLY be built when CONFIG_GPIOLIB=y and
- *	 CONFIG_ALCHEMY_GPIO_INDIRECT=n, otherwise compilation will fail!
  *	au1000 SoC have only one GPIO block : GPIO1
  *	Au1100, Au15x0, Au12x0 have a second one : GPIO2
  *	Au1300 is totally different: 1 block with up to 128 GPIOs

arch/mips/ath79/setup.c

@@ -34,15 +34,6 @@
 
 static char ath79_sys_type[ATH79_SYS_TYPE_LEN];
 
-static void ath79_restart(char *command)
-{
-	local_irq_disable();
-	ath79_device_reset_set(AR71XX_RESET_FULL_CHIP);
-	for (;;)
-		if (cpu_wait)
-			cpu_wait();
-}
-
 static void ath79_halt(void)
 {
 	while (1)
@@ -234,7 +225,6 @@ void __init plat_mem_setup(void)
 
 	detect_memory_region(0, ATH79_MEM_SIZE_MIN, ATH79_MEM_SIZE_MAX);
 
-	_machine_restart = ath79_restart;
 	_machine_halt = ath79_halt;
 	pm_power_off = ath79_halt;
 }

arch/mips/bcm47xx/Platform

@@ -4,4 +4,3 @@
 cflags-$(CONFIG_BCM47XX)	+=					\
 		-I$(srctree)/arch/mips/include/asm/mach-bcm47xx
 load-$(CONFIG_BCM47XX)		:= 0xffffffff80001000
-zload-$(CONFIG_BCM47XX)		+= 0xffffffff80400000

arch/mips/bcm47xx/board.c

@@ -141,6 +141,7 @@ struct bcm47xx_board_type_list2 bcm47xx_board_list_boot_hw[] __initconst = {
 	{{BCM47XX_BOARD_LINKSYS_WRT300NV11, "Linksys WRT300N V1.1"}, "WRT300N", "1.1"},
 	{{BCM47XX_BOARD_LINKSYS_WRT310NV1, "Linksys WRT310N V1"}, "WRT310N", "1.0"},
 	{{BCM47XX_BOARD_LINKSYS_WRT310NV2, "Linksys WRT310N V2"}, "WRT310N", "2.0"},
+	{{BCM47XX_BOARD_LINKSYS_WRT320N_V1, "Linksys WRT320N V1"}, "WRT320N", "1.0"},
 	{{BCM47XX_BOARD_LINKSYS_WRT54G3GV2, "Linksys WRT54G3GV2-VF"}, "WRT54G3GV2-VF", "1.0"},
 	{{BCM47XX_BOARD_LINKSYS_WRT610NV1, "Linksys WRT610N V1"}, "WRT610N", "1.0"},
 	{{BCM47XX_BOARD_LINKSYS_WRT610NV2, "Linksys WRT610N V2"}, "WRT610N", "2.0"},
@@ -161,9 +162,12 @@ struct bcm47xx_board_type_list1 bcm47xx_board_list_board_id[] __initconst = {
 	{{BCM47XX_BOARD_LUXUL_XWR_600_V1, "Luxul XWR-600 V1"}, "luxul_xwr600_v1"},
 	{{BCM47XX_BOARD_LUXUL_XWR_1750_V1, "Luxul XWR-1750 V1"}, "luxul_xwr1750_v1"},
 	{{BCM47XX_BOARD_NETGEAR_R6200_V1, "Netgear R6200 V1"}, "U12H192T00_NETGEAR"},
+	{{BCM47XX_BOARD_NETGEAR_R6300_V1, "Netgear R6300 V1"}, "U12H218T00_NETGEAR"},
 	{{BCM47XX_BOARD_NETGEAR_WGR614V8, "Netgear WGR614 V8"}, "U12H072T00_NETGEAR"},
 	{{BCM47XX_BOARD_NETGEAR_WGR614V9, "Netgear WGR614 V9"}, "U12H094T00_NETGEAR"},
 	{{BCM47XX_BOARD_NETGEAR_WGR614_V10, "Netgear WGR614 V10"}, "U12H139T01_NETGEAR"},
+	{{BCM47XX_BOARD_NETGEAR_WN2500RP_V1, "Netgear WN2500RP V1"}, "U12H197T00_NETGEAR"},
+	{{BCM47XX_BOARD_NETGEAR_WN2500RP_V2, "Netgear WN2500RP V2"}, "U12H294T00_NETGEAR"},
 	{{BCM47XX_BOARD_NETGEAR_WNDR3300, "Netgear WNDR3300"}, "U12H093T00_NETGEAR"},
 	{{BCM47XX_BOARD_NETGEAR_WNDR3400V1, "Netgear WNDR3400 V1"}, "U12H155T00_NETGEAR"},
 	{{BCM47XX_BOARD_NETGEAR_WNDR3400V2, "Netgear WNDR3400 V2"}, "U12H187T00_NETGEAR"},
@@ -345,7 +349,7 @@ void __init bcm47xx_board_detect(void)
 
 	board_detected = bcm47xx_board_get_nvram();
 	bcm47xx_board.board = board_detected->board;
-	strlcpy(bcm47xx_board.name, board_detected->name,
+	strscpy(bcm47xx_board.name, board_detected->name,
 		BCM47XX_BOARD_MAX_NAME);
 }
 

arch/mips/bcm47xx/buttons.c

@@ -26,6 +26,12 @@
 
 /* Asus */
 
+static const struct gpio_keys_button
+bcm47xx_buttons_asus_rtn10u[] __initconst = {
+	BCM47XX_GPIO_KEY(20, KEY_WPS_BUTTON),
+	BCM47XX_GPIO_KEY(21, KEY_RESTART),
+};
+
 static const struct gpio_keys_button
 bcm47xx_buttons_asus_rtn12[] __initconst = {
 	BCM47XX_GPIO_KEY(0, KEY_WPS_BUTTON),
@@ -276,6 +282,18 @@ bcm47xx_buttons_linksys_wrt310nv1[] __initconst = {
 	BCM47XX_GPIO_KEY(8, KEY_UNKNOWN),
 };
 
+static const struct gpio_keys_button
+bcm47xx_buttons_linksys_wrt310n_v2[] __initconst = {
+	BCM47XX_GPIO_KEY(5, KEY_WPS_BUTTON),
+	BCM47XX_GPIO_KEY(6, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_linksys_wrt320n_v1[] __initconst = {
+	BCM47XX_GPIO_KEY(5, KEY_WPS_BUTTON),
+	BCM47XX_GPIO_KEY(8, KEY_RESTART),
+};
+
 static const struct gpio_keys_button
 bcm47xx_buttons_linksys_wrt54g3gv2[] __initconst = {
 	BCM47XX_GPIO_KEY(5, KEY_WIMAX),
@@ -391,6 +409,17 @@ bcm47xx_buttons_netgear_r6200_v1[] __initconst = {
 	BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON),
 };
 
+static const struct gpio_keys_button
+bcm47xx_buttons_netgear_r6300_v1[] __initconst = {
+	BCM47XX_GPIO_KEY(6, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_netgear_wn2500rp_v1[] __initconst = {
+	BCM47XX_GPIO_KEY(12, KEY_RESTART),
+	BCM47XX_GPIO_KEY(31, KEY_WPS_BUTTON),
+};
+
 static const struct gpio_keys_button
 bcm47xx_buttons_netgear_wndr3400v1[] __initconst = {
 	BCM47XX_GPIO_KEY(4, KEY_RESTART),
@@ -478,6 +507,9 @@ int __init bcm47xx_buttons_register(void)
 	int err;
 
 	switch (board) {
+	case BCM47XX_BOARD_ASUS_RTN10U:
+		err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_rtn10u);
+		break;
 	case BCM47XX_BOARD_ASUS_RTN12:
 		err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_rtn12);
 		break;
@@ -608,6 +640,12 @@ int __init bcm47xx_buttons_register(void)
 	case BCM47XX_BOARD_LINKSYS_WRT310NV1:
 		err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt310nv1);
 		break;
+	case BCM47XX_BOARD_LINKSYS_WRT310NV2:
+		err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt310n_v2);
+		break;
+	case BCM47XX_BOARD_LINKSYS_WRT320N_V1:
+		err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt320n_v1);
+		break;
 	case BCM47XX_BOARD_LINKSYS_WRT54G3GV2:
 		err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt54g3gv2);
 		break;
@@ -674,6 +712,12 @@ int __init bcm47xx_buttons_register(void)
 	case BCM47XX_BOARD_NETGEAR_R6200_V1:
 		err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_r6200_v1);
 		break;
+	case BCM47XX_BOARD_NETGEAR_R6300_V1:
+		err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_r6300_v1);
+		break;
+	case BCM47XX_BOARD_NETGEAR_WN2500RP_V1:
+		err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wn2500rp_v1);
+		break;
 	case BCM47XX_BOARD_NETGEAR_WNDR3400V1:
 		err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wndr3400v1);
 		break;

arch/mips/bcm47xx/leds.c

@@ -29,6 +29,14 @@
 
 /* Asus */
 
+static const struct gpio_led
+bcm47xx_leds_asus_rtn10u[] __initconst = {
+	BCM47XX_GPIO_LED(5, "green", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(6, "green", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+	BCM47XX_GPIO_LED(7, "green", "wps", 0, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(8, "green", "usb", 0, LEDS_GPIO_DEFSTATE_OFF),
+};
+
 static const struct gpio_led
 bcm47xx_leds_asus_rtn12[] __initconst = {
 	BCM47XX_GPIO_LED(2, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
@@ -313,6 +321,13 @@ bcm47xx_leds_linksys_wrt310nv1[] __initconst = {
 	BCM47XX_GPIO_LED(9, "blue", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
 };
 
+static const struct gpio_led
+bcm47xx_leds_linksys_wrt320n_v1[] __initconst = {
+	BCM47XX_GPIO_LED(1, "blue", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(2, "blue", "power", 0, LEDS_GPIO_DEFSTATE_ON),
+	BCM47XX_GPIO_LED(4, "amber", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
 static const struct gpio_led
 bcm47xx_leds_linksys_wrt54g_generic[] __initconst = {
 	BCM47XX_GPIO_LED(0, "unk", "dmz", 1, LEDS_GPIO_DEFSTATE_OFF),
@@ -556,6 +571,9 @@ void __init bcm47xx_leds_register(void)
 	enum bcm47xx_board board = bcm47xx_board_get();
 
 	switch (board) {
+	case BCM47XX_BOARD_ASUS_RTN10U:
+		bcm47xx_set_pdata(bcm47xx_leds_asus_rtn10u);
+		break;
 	case BCM47XX_BOARD_ASUS_RTN12:
 		bcm47xx_set_pdata(bcm47xx_leds_asus_rtn12);
 		break;
@@ -689,6 +707,9 @@ void __init bcm47xx_leds_register(void)
 	case BCM47XX_BOARD_LINKSYS_WRT310NV1:
 		bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt310nv1);
 		break;
+	case BCM47XX_BOARD_LINKSYS_WRT320N_V1:
+		bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt320n_v1);
+		break;
 	case BCM47XX_BOARD_LINKSYS_WRT54G3GV2:
 		bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt54g3gv2);
 		break;

arch/mips/bcm63xx/clk.c

@@ -387,6 +387,12 @@ struct clk *clk_get_parent(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_get_parent);
 
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+	return 0;
+}
+EXPORT_SYMBOL(clk_set_parent);
+
 unsigned long clk_get_rate(struct clk *clk)
 {
 	if (!clk)